Most common failures | No# failures |
---|
Headlamp aim out of alignment | 20 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 10 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 8 |
Rear reflector on motorcycle obscured |1.4.1| | 6 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 5 |
Drive chain excessively loose |6.2.1d| | 5 |
Drive chain worn to excess |6.2.1e| | 5 |
Nearside Rear Footrest missing |6.2.1a| | 4 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 3 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 3 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Offside Rear Footrest missing |6.2.1a| | 3 |
Rear reflector missing (4.8.2 (a) (ii)) | 3 |
Rear reflector on motorcycle missing |1.4.1| | 3 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 3 |
Drive chain sprocket carrier worn to excess |6.2.1e| | 2 |
Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 2 |
Front Steering headbearing has excessive free play |2.2.2| | 2 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 2 |
Horn not working |1.7.3a| | 2 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 2 |
Brake locking device missing |3.2.A1e| | 2 |
Throttle operating incorrectly |6.2.1f| | 2 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Rear suspension bearing has excessive free play Swinging arm |2.4.A2a|i|| | 1 |
Centre Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Centre Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Centre Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Handlebar deformed |2.1.1b| | 1 |
Chain guard insecure |6.2.1c| | 1 |
Rear Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Rear Motorcycle structure excessively corroded |6.1.1a| | 1 |
Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear Drive chain excessively loose |6.2.1d| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Fuel system component leaking Carburettor fuel leak |7.2.1a| | 1 |
Headlamp at least one does not illuminate on main beam (1.2.2a(ii)) | 1 |
Rear Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 1 |
Rear Stop lamp not working Foot pedal. (4.3.1 (a) (ii)) | 1 |
Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Brake reaction bracket insecure |3.2.A1j| | 1 |
Nearside Front Footrest insecure |6.2.1a| | 1 |
Rear Brake pedal is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Offside Rear Direction indicator insecure |1.5.3b| | 1 |
Nearside Front Direction indicator insecure |1.5.3b| | 1 |
Rear Chain guard insecure |6.2.1c| | 1 |
Fuel system component insecure |7.2.1b| | 1 |
Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 1 |
Rear Brake rod insecure reaction bracket on rear drum end as nut missing (1.1.15 (c)) | 1 |
Rear Footrest missing both right and left rear (6.2.12 (a)) | 1 |
Drive chain excessively tight, so that it is likely to fail (6.1.7 (k) (ii)) | 1 |
Nearside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
Rear suspension component loose |2.4.A.1a| | 1 |
Front Drive chain sprocket worn to excess |6.2.1e| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Front Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Direction indicators flashing more than 120 times per minute All |1.5.1c| | 1 |
Headlamp switch faulty |1.2.4| | 1 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Rear Suspension component pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Nearside Rear Drive chain excessively loose |6.2.1d| | 1 |
Nearside Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Offside Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Front Position lamp not working (4.2.1 (a)) | 1 |
Wheel alignment incorrect which adversely affects the steering (2.4 (a)) | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear Footrest missing (6.2.12 (a)) | 1 |
Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
Front Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
Rear Stop lamp not working application |4.3.1 |a| |ii|| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Offside Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Nearside Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Offside Front Brake lever is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
Nearside Rear Drive chain worn to excess |6.2.1e| | 1 |
Nearside Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
Centre Front Upper Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
Central Front Steering headbearing has excessive free play |2.2.2| | 1 |
Rear Rear reflector on sidecar incorrectly positioned |1.4.2d| | 1 |
Rear Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Throttle operating incorrectly |6.2.7 |a| |i|| | 1 |
Front Brake locking device missing |3.2.A1e| | 1 |
Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Rear reflector on motorcycle obscured |1.4.2b| | 1 |
Rear Plate brake test indicates a sticking brake |3.3.B1a| | 1 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Drive chain sprocket worn to excess |6.2.1e| | 1 |
Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
Footrest missing |6.2.1a| | 1 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Front Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Offside Front Brake lever has abnormal movement of levers indicating excessive wear or maladjustment |1.1.15 |f|| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on position lamp not working |1.1.3a| | 1 |
Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
Direction indicator not working both rear indicators (4.4.1 (a) (ii)) | 1 |
Rear Position lamp likely to become detached (4.2.1 (c) (ii)) | 1 |
Footrest missing both rear footpegs (6.2.12 (a)) | 1 |
Drive chain so worn it is likely to fail chain and sprockets (6.1.7 (c) (ii)) | 1 |
Rear Brake lining(s) less than 1.0 mm thick excessively worn (1.1.13 (a)) | 1 |
Rear Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
Drive chain excessively tight |6.2.1d| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |