Most common failures | No# failures |
---|
Registration plate issues | 83 |
Rear reflector on motorcycle missing |1.4.1| | 74 |
Headlamp aim out of alignment | 64 |
Rear reflector missing (4.8.2 (a) (ii)) | 18 |
Drive chain excessively loose |6.2.1d| | 12 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 12 |
Drive chain worn to excess |6.2.1e| | 11 |
Horn not working |1.7.3a| | 10 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 10 |
Rear reflector missing |4.8.2 |a| |ii|| | 10 |
Rear Rear reflector on motorcycle missing |1.4.1| | 10 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Registration plate lamp issues | 6 |
Indicator switch insecure |1.5.4| | 5 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 5 |
Horn not working (7.7 (a) (ii)) | 5 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 5 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 5 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 5 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 4 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
Rear Brake excessively binding (1.2.1 (f)) | 4 |
Stop lamp remains on when the brake is released |1.3.1e| | 4 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 3 |
Direction indicator flashing more than 120 times per minute |1.5.1c| | 3 |
Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 3 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 3 |
Rear Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 3 |
Nearside Rear Direction indicator not working |1.5.1c| | 3 |
Drive chain excessively loose (6.1.7 (c) (i)) | 3 |
Steering headbearing has excessive free play |2.2.2| | 3 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 3 |
Nearside Rear Direction indicator insecure |1.5.3b| | 3 |
Rear reflector on motorcycle does not reflect squarely to the rear |1.4.1| | 3 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 3 |
Direction indicators not working |1.5.1c| | 2 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
Rear Rear reflector missing |4.8.2 |a| |ii|| | 2 |
Nearside Rear Direction indicators not working |1.5.1c| | 2 |
Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 2 |
Front Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 2 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Front Position lamp not working (4.2.1 (a)) | 2 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 2 |
Rear Direction indicators flashing more than 120 times per minute |1.5.1c| | 2 |
Throttle operating incorrectly |6.2.1f| | 2 |
Rear Rear shock absorber insecurely mounted |2.4.A.3b| | 2 |
Rear suspension component loose lower bolt . |2.4.A.1a| | 2 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
Nearside Headlamp switch insecure |1.2.4| | 2 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Front Brake disc|s| securing bolt|s| missing |3.2.A1g| | 2 |
Front Brake excessively binding (1.2.1 (f)) | 2 |
Horn is not a constant note |1.7.3c| | 2 |
Drive chain excessively tight (6.1.7 (k) (i)) | 2 |
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 2 |