Most common failures | No# failures |
---|
Registration plate issues | 14 |
Rear reflector on motorcycle missing |1.4.1| | 11 |
Headlamp aim out of alignment | 8 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 6 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 5 |
Front wheel bearings have excessive free play |2.3.5b| | 4 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 3 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Horn not working |1.7.3a| | 2 |
Throttle operating incorrectly |6.2.1f| | 2 |
Nearside Rear Direction indicators not working |1.5.1c| | 2 |
Headlamp aim beam image kick up to the offside |1.6| | 2 |
Drive chain sprocket carrier worn to excess |6.2.1e| | 2 |
Drive chain excessively loose |6.2.1d| | 2 |
Riders seat insecure |6.2.1a| | 2 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 2 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Centre Rear reflector on motorcycle missing |1.4.1| | 2 |
Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Rear Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Rear Footrest insecure |6.2.1a| | 1 |
Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Front Brake disc|s| cracked |3.2.A1g| | 1 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
Rear Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Drive chain worn to excess |6.2.1e| | 1 |
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
Front Stop lamp deteriorated and function impaired |1.3.3a| | 1 |
Front Brake lever is damaged and the brake cannot be readily applied |3.1.3c| | 1 |
Front Wheel spoke excessively loose |4.2.1b| | 1 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Dipswitch does not extinquish main beam/s, leaving at least 1 dipped beam headlamp |1.2.2b|i|| | 1 |
Rear Brake linkage has abnormal movement due to excessive wear |3.2.A1i| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Stop lamp remains on when the brakes are released | 1 |
Rear reflector on motorcycle deteriorated and function impaired |1.4.2a| | 1 |
Nearside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Nearside Front Direction indicator missing |1.5.1a| | 1 |
Offside Front Direction indicator missing |1.5.1a| | 1 |
Nearside Rear Direction indicator missing |1.5.1a| | 1 |
Offside Rear Direction indicator missing |1.5.1a| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Registration plate lamp issues | 1 |
Direction indicator not working All not flashing when revs applied and inconsistent flashing on tick over |1.5.1c| | 1 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Headlamp deteriorated and function impaired |1.2.3a| | 1 |
Fuel system component insecure |7.2.1b| | 1 |
Direction indicators not working not consistently flashing |1.5.1c| | 1 |
Offside Rear Direction indicators not working does not illuminate |1.5.1c| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Offside Front Front suspension has a fracture of a load bearing member or its supporting structure. spindle clamp fractured |2.3.8| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Nearside Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Offside Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Rear Hydraulic brake control feels spongy |3.1.4a| | 1 |
Offside Steering lock stop missing |2.1.3| | 1 |
Drive chain excessively tight |6.2.1d| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Drive chain fouling another component |6.2.1d| | 1 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Centre Rear Upper Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Centre Rear Upper Rear reflector on motorcycle missing |1.4.1| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Rear suspension component loose |2.4.A.1a| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Centre Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Centre Front Wheel spoke excessively loose |4.2.1b| | 1 |
Centre Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Offside Rear Exhaust excessively deteriorated |7.1.1a| | 1 |
Offside Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Offside Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Centre Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Centre Front Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Exhaust mounting missing |7.1.1c| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front position lamp missing |1.1.1a| | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear Footrest missing |6.2.1a| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Handlebar deformed |2.1.1b| | 1 |