| Most common failures | No# failures |
|---|
| Registration plate issues | 18 |
| Rear reflector on motorcycle missing |1.4.1| | 13 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 11 |
| Headlamp aim out of alignment | 7 |
| Front wheel bearings have excessive free play |2.3.5b| | 5 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 5 |
| Headlamp aim beam image kick up to the offside |1.6| | 4 |
| Rear Brake disc|s| excessively worn |3.2.A1l| | 3 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
| Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 3 |
| Nearside Rear Direction indicators not working |1.5.1c| | 3 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 3 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
| Nearside Front Direction indicator not working |1.5.1c| | 2 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
| Front wheel bearings are excessively rough |2.3.5b| | 2 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
| Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 2 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
| Horn not working |1.7.3a| | 2 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Front Brake disc|s| cracked |3.2.A1g| | 1 |
| Rear Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Front Wheel spoke excessively loose |4.2.1b| | 1 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Steering headbearing has excessive free play |2.2.2| | 1 |
| Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Brake disc|s| has excessive run out |3.2.A1m| | 1 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Rear reflector missing |4.8.2 |a| |ii|| | 1 |
| Throttle operating incorrectly |6.2.7 |a| |i|| | 1 |
| Front Brake excessively binding |1.2.1 |f|| | 1 |
| Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
| Offside Rear Brake cylinder leaking and braking performance affected (1.1.16 (b) (ii)) | 1 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Front Direction indicator missing |1.5.1a| | 1 |
| Rear Direction indicator missing |1.5.1a| | 1 |
| Headlamp insecure |1.2.3b| | 1 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Front Brake excessively binding (1.2.1 (f)) | 1 |
| Throttle operating incorrectly Does not return on left lock. |6.2.1f| | 1 |
| Offside Rear Direction indicators not working |1.5.1c| | 1 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Drive chain excessively loose |6.2.1d| | 1 |
| Rear Wheel spoke excessively loose |4.2.1b| | 1 |
| Brake pedal is bent and the brake cannot be readily applied |3.1.3c| | 1 |
| Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
| Rear Wheel spindle locking device missing (5.2.1 (d)) | 1 |
| Brake hose damaged | 1 |
| Horn control defective |1.7.2a| | 1 |
| Front wheel spindle loose |2.3.5a| | 1 |
| Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
| Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
| Front wheel spindle securing nut|s| loose |2.3.3a| | 1 |
| Nearside Front Lower Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
| Front Inner Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Rear Inner Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
| Rear Outer Rear reflector on motorcycle missing |1.4.1| | 1 |
| Rear Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
| Rear Brake disc|s| excessively scored |3.2.A1l| | 1 |
| Offside Front Direction indicators not working |1.5.1c| | 1 |
| Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |