| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 24 |
| Rear reflector on motorcycle missing |1.4.1| | 23 |
| Drive chain worn to excess |6.2.1e| | 18 |
| Registration plate issues | 13 |
| Drive chain excessively loose |6.2.1d| | 12 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 10 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 9 |
| Rear Brake locking device missing |3.2.A1e| | 8 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 7 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 7 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 6 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 6 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
| Nearside Rear Direction indicator not working |1.5.1c| | 5 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 4 |
| Horn not working |1.7.3a| | 4 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 4 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 4 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 3 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
| Stop lamp remains on when the brakes are released | 3 |
| Rear Brake reaction bracket insecure |3.2.A1j| | 3 |
| Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 3 |
| Nearside Rear Footrest missing |6.2.1a| | 3 |
| Offside Rear Footrest missing |6.2.1a| | 3 |
| Rear suspension movement is excessively stiff |2.4.A.3b| | 3 |
| Rear reflector missing (4.8.2 (a) (ii)) | 3 |
| Rear mono-shock pivot excessively worn |2.4.B.4| | 3 |
| Offside Rear Direction indicator not working |1.5.1c| | 3 |
| Rear Brake pedal cannot be released smoothly |3.1.3d| | 3 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 3 |
| Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 3 |
| Rear Footrest missing |6.2.1a| | 3 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 3 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 2 |
| Front Drive chain sprocket worn to excess |6.2.1e| | 2 |
| Headlamp insecure |1.2.3b| | 2 |
| Front Brake disc|s| has excessive run out |3.2.A1m| | 2 |
| Offside Rear Direction indicator missing |1.5.1a| | 2 |
| Offside Rear Direction indicators not working |1.5.1c| | 2 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 2 |
| Offside Front Direction indicator incorrect colour |1.5.1b| | 2 |
| Nearside Rear Footrest insecure |6.2.1a| | 2 |
| Rear Floor brake test indicates a sticking brake |3.3.C2c| | 2 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 2 |
| Drive chain excessively tight |6.2.1d| | 2 |
| Headlamp aim beam image kick up to the offside |1.6| | 2 |
| Nearside Rear Direction indicators not working |1.5.1c| | 2 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 2 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
| Headlamp aim not tested |1.6| | 2 |
| Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 2 |
| Headlamp switch faulty |1.2.4| | 2 |
| Chain guard insecure |6.2.1c| | 2 |
| Handlebar deformed |2.1.1b| | 2 |
| Throttle operating incorrectly |6.2.1f| | 2 |
| Nearside Front Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
| Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Nearside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
| Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
| Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 1 |
| Nearside Front Direction indicator not working |1.5.1c| | 1 |
| Registration plate lamp issues | 1 |
| Rear Wheel spindle loose (5.2.1 (c) (i)) | 1 |
| Nearside Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
| All direction indicators not working (4.4.1 (a) (ii)) | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Front Direction indicator missing |1.5.1a| | 1 |
| Rear Direction indicator missing |1.5.1a| | 1 |
| Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
| Direction indicator missing all indecators have been removed |1.5.1a| | 1 |
| Motorcycle structure cracked underside of engine |6.1.1a| | 1 |
| Rear All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
| Footrest missing foot pegs missing from rear |6.2.1a| | 1 |
| Front Stop lamp does not illuminate immediately a brake applies front brake switch |1.3.1a| | 1 |
| Nearside Direction indicators not working missing off bike |1.5.1c| | 1 |
| Offside Direction indicators not working missing off bike |1.5.1c| | 1 |
| Rear Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Nearside Front Direction indicator missing |1.5.1a| | 1 |
| Offside Front Direction indicator missing |1.5.1a| | 1 |
| Nearside Rear Direction indicator missing |1.5.1a| | 1 |
| Offside Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Front Brake master cylinder fluid level dangerously low |3.2.B1d| | 1 |
| Nearside Rear All direction indicators not working (4.4.1 (a) (ii)) | 1 |
| Offside Rear All direction indicators not working (4.4.1 (a) (ii)) | 1 |
| Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
| Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
| Front Brake lever insecure |3.1.2a| | 1 |
| Offside Front Direction indicator not working |1.5.1c| | 1 |
| Nearside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
| Offside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
| Nearside Front Upper Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Offside Front Upper Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Nearside Rear Upper Footrest missing |6.2.1a| | 1 |
| Offside Rear Lower Footrest missing |6.2.1a| | 1 |
| Inner Rear Upper Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
| Centre Front Motorcycle structure excessively damaged |6.1.1a| | 1 |
| Offside Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Rear Brake pedal insecure split pin missing |3.1.2a| | 1 |
| Rear Braking system does not have an approriate system/s fitted according to its age torque arm rear split pin missing |3.1.1| | 1 |
| Rear Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
| Horn not working (7.7 (a)) | 1 |
| Rear Brake component insecure Brake reaction bracket (1.1.21 (c)) | 1 |
| Front Brake hose damaged and likely to fail Front brake hose insecure (1.1.12 (a)) | 1 |
| Floor brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
| Rear Drive chain excessively loose |6.2.1d| | 1 |
| Brake back plate|s| insecure |3.2.A1j| | 1 |
| Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Centre Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Stop lamp damaged and function impaired |1.3.3a| | 1 |
| Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Front wheel insecure |4.2.3b| | 1 |
| Nearside Rear Drive chain worn to excess |6.2.1e| | 1 |
| Nearside Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Centre Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
| Centre Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Brake lever cannot be applied smoothly |3.1.3d| | 1 |
| Front Brake lever is inoperative |3.1.3c| | 1 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Front Handlebar deformed to the extent that steering is affected |2.2.1 |c| |ii|| | 1 |
| Front Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Horn missing |1.7.1| | 1 |
| Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
| Centre Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Front Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Position lamp switch does not operate the front and rear position lamps |1.1.4c| | 1 |
| Rear Wheel spoke excessively loose |4.2.1b| | 1 |
| Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
| Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
| Nearside Front Direction indicator incorrect colour |1.5.1b| | 1 |
| Rear Wheel spoke excessively loose (5.2.2 (d)) | 1 |
| Headlamp insecure (4.1.1 (c)) | 1 |
| Stop lamp does not illuminate immediately a brake applies hand brake |1.3.1a| | 1 |
| Nearside Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Offside Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
| Fuel system component leaking |7.2.1a| | 1 |
| Front suspension assembly component excessively misaligned |2.3.1| | 1 |
| Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Offside Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Fuel hose leaking excessively or a risk of fire at fuel tap/filter (6.1.3 (b) (ii)) | 1 |
| Rear Suspension arm attachment bracket/mounting insecure swinging arm pivot bolt loose (5.3.3 (a) (i)) | 1 |
| Offside Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Centre Front Upper Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Offside Front Horn control defective |1.7.2a| | 1 |
| Nearside Rear Upper Direction indicator insecure |1.5.3b| | 1 |
| Nearside Rear Wheel spoke excessively loose |4.2.1b| | 1 |
| Centre Rear Wheel inadequatly repaired significantly reducing the original strength |4.2.1a| | 1 |
| Nearside Outer Front Decelerometer brake test indicates a binding brake |3.3.E1d| | 1 |
| Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Wheel spoke excessively loose |4.2.1b| | 1 |
| Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
| Horn not working (7.7 (a) (ii)) | 1 |
| Front Brake lever is so short that the brake cannot be readily applied (1.1.2 (d)) | 1 |
| Brake performance not tested due to front brake leaver (1.2.1 (g)) | 1 |
| Fuel pipe insecure (6.1.3 (a) (i)) | 1 |
| Rear Footrest insecure |6.2.12 |a|| | 1 |
| Brake clevis joint insecure |1.1.15 |c|| | 1 |
| Fuel system component leaking Carb drain |7.2.1a| | 1 |
| Offside Rear Footrest insecure |6.2.1a| | 1 |
| Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Brake reaction bracket insecure |3.2.A1j| | 1 |
| Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
| Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
| Stop lamp does not emit a steady light |1.3.1b| | 1 |
| Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
| Rear Upper Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| Brake drum|s| securing bolt|s| missing |3.2.A1g| | 1 |
| Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Offside Front Footrest insecure |6.2.1a| | 1 |
| Clutch lever shortened so it cannot be readily operated. |6.2.1g| | 1 |
| Nearside Front Direction indicators not working |1.5.1c| | 1 |
| Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Offside Front Handlebar deformed |2.1.1b| | 1 |
| Nearside Front Wheel spoke excessively loose |4.2.1b| | 1 |
| Offside Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
| Offside Rear Lower Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
| Front Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
| Front Brake pipe union leaking fluid |3.2.B4| | 1 |
| Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |