Most common failures | No# failures |
---|
Rear reflector on motorcycle missing |1.4.1| | 29 |
Registration plate issues | 24 |
Headlamp aim out of alignment | 15 |
Horn not working |1.7.3a| | 7 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 4 |
Drive chain excessively loose |6.2.1d| | 4 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 4 |
Rear reflector missing (4.8.2 (a) (ii)) | 4 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 4 |
Nearside Front Direction indicator not working |1.5.1c| | 4 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Offside Rear Direction indicator not working |1.5.1c| | 3 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 3 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 3 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 2 |
Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 2 |
Stop lamp remains on when the brakes are released | 2 |
Front Wheel bearing has excessive play |5.1.3 |a| |i|| | 2 |
Horn not working |7.7 |a| |ii|| | 2 |
Offside Front Direction indicator not working |1.5.1c| | 2 |
Nearside Rear Direction indicator insecure |1.5.3b| | 2 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Horn not working (7.7 (a) (ii)) | 2 |
Drive chain excessively tight |6.2.1d| | 2 |
Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
Steering headbearing has excessive free play |2.2.2| | 2 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Rear Position lamp not working (4.2.1 (a)) | 2 |
Nearside Inner Front Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Front Lower Steering column shaft has excessive end float |2.1.3| | 1 |
Parking brake not fitted on at least two wheels |3.1.1| | 1 |
Nearside Front brake caliper securing device excessively deteriorated |3.5.1j| | 1 |
Rear brake caliper securing device excessively deteriorated |3.5.1j| | 1 |
Parking brake efficiency below requirements |3.7.C.1b| | 1 |
Nearside Rear Footrest missing |6.2.1a| | 1 |
Offside Rear Footrest missing |6.2.1a| | 1 |
Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear position lamp insecure |1.1.1c| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Nearside Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Offside Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Rear Drive chain worn to excess |6.2.1e| | 1 |
Indicator switch insecure |1.5.4| | 1 |
Throttle operating incorrectly Throttle side switch gear insecure |6.2.1f| | 1 |
Direction indicators not working Indicators missing |1.5.1c| | 1 |
Rear Footrest missing |6.2.1a| | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Offside Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Rear Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Front Brake grabbing severely (1.2.1 (c)) | 1 |
An item not tested |Manual| | 1 |
Front Drive chain sprocket excessively loose front sprocket securing nut loose (6.1.7 (c) (i)) | 1 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Rear wheel spindle loose |2.4.A.2b| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Front Steering headbearing has excessive wear or free play adjusted up. (2.2.2 (f) (i)) | 1 |
Rear Brake indicates excessive fluctuation of brake effort DISK WARPED (1.2.1 (e)) | 1 |
Rear Brake excessively binding (1.2.1 (f)) | 1 |
Nearside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Nearside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Offside Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Nearside Rear Wheel spindle loose (5.2.1 (c) (i)) | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Front Front position lamp incorrect colour |1.1.2a| | 1 |
Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
Rear Floor brake test indicates a severely grabbing brake |3.3.C2d| | 1 |
Rear Brake disc|s| excessively scored |3.2.A1l| | 1 |
Offside Rear Footrest insecure (6.2.1a) | 1 |
Offside Rear Direction indicators not working (1.5.1c) | 1 |
Offside Front Indicator tell tale not functioning (1.5.2) | 1 |
Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Horn not working (7.7 (a)) | 1 |
Rear Brake caliper|s| insecure |3.2.A1j| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear Stop lamp does not illuminate by the operation of both brake controls Rear brake switch not working. (4.3.2 (a) (iii)) | 1 |
Footrest insecure (6.2.12 (a)) | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Front Headlamp deteriorated and function impaired |1.2.3a| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Front Brake disc|s| insecure |3.2.A1g| | 1 |
Position lamp showing white light to the rear |4.2.3 |a| |ii|| | 1 |
Fuel system component leaking |7.2.1a| | 1 |
Front Brake excessively binding (1.2.1 (f)) | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Front Brake component is excessively corroded |3.1.5| | 1 |
Offside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Nearside Rear Drive chain so worn it is likely to fail (6.1.7 (c) (ii)) | 1 |
Front Stop lamp does not emit a steady light |1.3.1b| | 1 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Nearside Front Direction indicator insecure |1.5.3b| | 1 |
Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Front Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
Decelerometer brake test the less effective brake control does not achieve an efficiency of 25%. |3.3.E1b| | 1 |
Offside Rear Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Position lamp not working (4.2.1 (a)) | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Chain guard insecure |6.2.1c| | 1 |