Most common failures | No# failures |
---|
Registration plate issues | 99 |
Rear reflector on motorcycle missing |1.4.1| | 75 |
Headlamp aim out of alignment | 69 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 27 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 23 |
Horn not working |1.7.3a| | 23 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 21 |
Rear reflector missing (4.8.2 (a) (ii)) | 19 |
Front wheel bearings have excessive free play |2.3.5b| | 18 |
Drive chain worn to excess |6.2.1e| | 17 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 17 |
Drive chain excessively loose |6.2.1d| | 14 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 14 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 14 |
Rear Rear reflector on motorcycle missing |1.4.1| | 12 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 10 |
Horn not loud enough to be heard by another road user |1.7.3a| | 9 |
Rear reflector missing |4.8.2 |a| |ii|| | 8 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 8 |
Rear Wheel spoke excessively loose |4.2.1b| | 7 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 7 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 7 |
Front wheel bearings are excessively rough |2.3.5b| | 7 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 7 |
Headlamp aim beam image kick up to the offside |1.6| | 6 |
Front Wheel spoke excessively loose |4.2.1b| | 6 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 5 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 5 |
Front Front wheel bearings have excessive free play |2.3.5b| | 5 |
Horn not working (7.7 (a) (ii)) | 5 |
Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 5 |
Drive chain excessively tight |6.2.1d| | 5 |
Front Brake disc|s| excessively worn |3.2.A1l| | 5 |
Riders seat insecure |6.2.1a| | 4 |
Horn missing |1.7.1| | 4 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 4 |
Brake hose excessively deteriorated | 4 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 4 |
Registration plate lamp issues | 4 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 4 |
Front Drive chain sprocket worn to excess |6.2.1e| | 3 |
Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 3 |
Fuel cap sealing washer missing |7.2.2c| | 3 |
Offside Rear Direction indicators not working |1.5.1c| | 3 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 3 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 3 |
Rear Brake excessively binding |1.2.1 |f|| | 3 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 3 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 3 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
Steering headbearing has excessive free play |2.2.2| | 3 |
Nearside Rear Direction indicator not working |1.5.1c| | 3 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 3 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 3 |
Rear Wheel spoke excessively loose |5.2.2 |d|| | 3 |
Horn not working (7.7 (a)) | 3 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 3 |
Rear Wheel alignment incorrect which adversely affects the handling (2.4 (a)) | 2 |
Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 2 |
Front Direction indicator missing |1.5.1a| | 2 |
Rear Direction indicator missing |1.5.1a| | 2 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 2 |
Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 2 |
Direction indicator missing |1.5.1a| | 2 |
Nearside Direction indicator flashing more than 120 times per minute |1.5.1c| | 2 |
Nearside Front Direction indicator missing |1.5.1a| | 2 |
Offside Front Direction indicator missing |1.5.1a| | 2 |
Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 2 |
Wheel spoke excessively loose |4.2.1b| | 2 |
Stop lamp remains on when the brakes are released | 2 |
Chain guard insecure |6.2.1c| | 2 |
Horn not working |7.7 |a| |ii|| | 2 |
Rear Direction indicator not working |1.5.1c| | 2 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 2 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
Nearside Rear Footrest missing |6.2.1a| | 2 |
Offside Rear Footrest missing |6.2.1a| | 2 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Drive chain excessively tight (6.1.7 (k) (i)) | 2 |
Drive chain so worn it is likely to fail (6.1.7 (c) (ii)) | 2 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
Nearside Rear Direction indicator not working |4.4.1 |a| |ii|| | 2 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Front Brake excessively binding (1.2.1 (f)) | 2 |
Rear Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 2 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 2 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 2 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 2 |
Indicator switch insecure |1.5.4| | 2 |
Nearside Rear Direction indicators not working |1.5.1c| | 2 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 2 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Brake lever attachment screws loose |3.1.2b| | 2 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
Rear Brake excessively binding (1.2.1 (f)) | 2 |
Front Brake excessively binding |1.2.1 |f|| | 2 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 2 |
Centre Rear reflector on motorcycle missing |1.4.1| | 2 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 2 |
Rear Position lamp not working (4.2.1 (a)) | 2 |
Rear An item not tested |Manual| | 2 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 2 |