Most common failures | No# failures |
---|
Headlamp aim out of alignment | 30 |
Drive chain excessively loose |6.2.1d| | 8 |
Front wheel bearings have excessive free play |2.3.5b| | 7 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 5 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 5 |
Drive chain excessively tight |6.2.1d| | 4 |
Horn not working |1.7.3a| | 4 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 4 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 4 |
Rear Valve stem seriously damaged (5.2.3 (j)) | 3 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii)) | 3 |
Registration plate lamp issues | 3 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 3 |
Rear Drive chain worn to excess |6.1.7 |c| |i|| | 2 |
Front Hydraulic brake control feels spongy |3.1.4a| | 2 |
Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 2 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 2 |
Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 2 |
Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 2 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
Stop lamp remains on when the brakes are released | 2 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 2 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
Headlamp light source and lamp not compatible |4.1.4 |c|| | 2 |
Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 2 |
Rear Hydraulic brake control feels spongy |3.1.4a| | 2 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Stop lamp does not illuminate by the operation of both brake controls front stop light not working. (4.3.2 (a) (iii)) | 1 |
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Rear Brake pedal not releasing correctly and functionality of brakes affected (1.1.2 (b) (ii)) | 1 |
Nearside Front Direction indicator incorrect colour (4.4.3 (a)) | 1 |
Offside Front Direction indicator incorrect colour (4.4.3 (a)) | 1 |
Drive chain worn to excess |6.1.7 |c| |i|| | 1 |
Front Drive chain sprocket so worn it is likely to fail |6.1.7 |c| |ii|| | 1 |
Rear Drive chain sprocket worn to excess |6.1.7 |c| |i|| | 1 |
Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Nearside Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Vehicle identification number incomplete (0.2 (b)) | 1 |
Nearside Rear Footrest missing |6.2.1a| | 1 |
Offside Rear Footrest missing |6.2.1a| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Throttle operating incorrectly throttle sticking on right hand lock (6.2.7 (a) (i)) | 1 |
Rear Valve stem seriously damaged |5.2.3 |j|| | 1 |
Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Rear Brake disc|s| insecure |3.2.A1g| | 1 |
Throttle operating incorrectly Throttle housing not secure to handlebars. |6.2.1f| | 1 |
Rear wheel spindle loose |2.4.A.2b| | 1 |
Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Offside Front Brake hose leaking fluid |3.2.B4| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Nearside Rear Lower Drive chain excessively tight |6.2.1d| | 1 |
Offside Rear Lower Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Offside Front Footrest insecure |6.2.1a| | 1 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Offside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
Handlebar deformed |2.1.1b| | 1 |
Rear Drive chain excessively loose |6.2.1d| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Front Upper Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
Front Lower Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
Rear Brake lever pivot excessively tight (1.1.1 (a)) | 1 |
Brake performance not tested Rear brake excessively binding (1.2.1 (g)) | 1 |
Steering control handlebar movement restricted by taut cables |2.1.2c| | 1 |
Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 1 |
Steering control handlebar movement restricted by trapped cables |2.1.2c| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Rear Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Headlamp aim not tested (4.1.2 (b)) | 1 |
Offside Handlebar deformed |2.1.1b| | 1 |
Nearside Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
Nearside Front Lower Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Offside Front Lower Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Rear Footrest missing both (6.2.12 (a)) | 1 |
Front Brake excessively binding (1.2.1 (f)) | 1 |
Rear Brake caliper insecurely mounted and braking performance affected (1.1.16 (c) (ii)) | 1 |
Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
Offside Steering operation fouling on the fuel tank or bodywork on full lock mirror (2.1.4 (b)) | 1 |
Brake caliper inadequately mounted bolt loose (1.1.16 (c) (i)) | 1 |
Drive chain excessively loose |6.1.7 |c| |i|| | 1 |
Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
Stop lamp does not emit a steady light |1.3.1b| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Nearside Front Direction indicator obscured |1.5.1a| | 1 |
Offside Front Direction indicator obscured |1.5.1a| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Offside Front Upper Throttle operating incorrectly Throttle sticking on full lock |6.2.1f| | 1 |
Nearside Headlamp aim beam image kick up to the offside |1.6| | 1 |
Offside Headlamp aim beam image kick up to the offside |1.6| | 1 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Rear Drive chain sprocket excessively loose (6.1.7 (c) (i)) | 1 |
Rear Drive chain so worn it is likely to fail (6.1.7 (c) (ii)) | 1 |
Rear Drive chain sprocket worn to excess (6.1.7 (c) (i)) | 1 |
Offside Front All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Registration plate issues | 1 |
Offside Front Direction indicator missing |4.4.1 |a| |ii|| | 1 |
Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Nearside Drive chain excessively tight |6.2.1d| | 1 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Throttle control functioning such that safe operation of the motorcycle is adversely affected |6.2.7 |a| |ii|| | 1 |
Nearside Rear Motorcycle structure joining/attachment plate or fastening insecure bolt missing from rear sub frame mount .Replaced and ok (6.1.1 (b) (i)) | 1 |
Brake pedal cannot be released smoothly |3.1.3d| | 1 |
Stop lamp remains on when the brake is released rear brake |1.3.1e| | 1 |
Drive chain worn to excess |6.2.1e| | 1 |
Rear Brake reaction bracket insecure |3.2.A1j| | 1 |