| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 36 |
| Registration plate lamp issues | 14 |
| Drive chain excessively loose |6.2.1d| | 12 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 10 |
| Headlamp aim beam image kick up to the offside |1.6| | 10 |
| Registration plate issues | 9 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 7 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 6 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 4 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 4 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
| Drive chain excessively tight |6.2.1d| | 3 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 3 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
| Steering headbearing has excessive free play |2.2.2| | 3 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 3 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 3 |
| Drive chain worn to excess |6.2.1e| | 3 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Front wheel bearings have excessive free play |2.3.5b| | 3 |
| Rear reflector on motorcycle missing |1.4.1| | 3 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
| Headlamp aim not tested |1.6| | 2 |
| Front Headlamp aim beam image kick up to the offside |1.6| | 2 |
| Front Brake lever cannot be applied smoothly |3.1.3d| | 2 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
| Rear suspension bearing has excessive free play |2.4.A2a|i|| | 2 |
| Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
| Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 2 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
| Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 2 |
| Drive chain sprocket carrier worn to excess |6.2.1e| | 2 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 2 |
| Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 2 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Stop lamp does not illuminate immediately a brake applies Front switch |1.3.1a| | 1 |
| Nearside Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Offside Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
| Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Centre Front Upper Headlamp aim beam image kick up to the offside |1.6| | 1 |
| All position lamps adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
| Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Rear Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Nearside Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
| Horn not working |7.7 |a| |ii|| | 1 |
| Rear Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
| Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Rear Brake pedal cannot be applied smoothly |3.1.3d| | 1 |
| Nearside Rear Footrest insecure |6.2.1a| | 1 |
| Front Shock absorber has a serious fluid leak R&L (5.3.2 (b)) | 1 |
| Horn not working (7.7 (a)) | 1 |
| Offside Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
| Rear Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
| Rear Valve stem seriously damaged (5.2.3 (j)) | 1 |
| Offside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Offside Front Direction indicator not working |1.5.1c| | 1 |
| Nearside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
| Nearside Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Front Horn not working (7.7 (a)) | 1 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Drive chain excessively tight, so that it is likely to fail (6.1.7 (k) (ii)) | 1 |
| All direction indicators not working (4.4.1 (a) (ii)) | 1 |
| Brake linkage clevis joint excessively worn |3.2.A1d| | 1 |
| Nearside Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Rear Lower Drive chain fouling another component |6.2.1d| | 1 |
| Valve stem seriously damaged |5.2.3 |j|| | 1 |
| Offside Front Direction indicator insecure |1.5.3b| | 1 |
| Offside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
| Rear Drive chain sprocket so loose it is likely to fail sprocket carrier bearing (6.1.7 (c) (ii)) | 1 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Rear Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition blown seal on downpipe (8.1.1 (a)) | 1 |
| Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Nearside Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
| Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Rear Suspension component pin or bush excessively worn rear suspension link bearing excessive play [link to swing arm] (5.3.4 (a) (i)) | 1 |
| Rear Brake disc|s| excessively scored |3.2.A1l| | 1 |
| Rear Suspension arm attachment bracket/mounting fractured linkage arm broken (5.3.3 (b) (ii)) | 1 |
| Front Brake excessively binding (1.2.1 (f)) | 1 |
| Brake performance unable to be tested (1.2.1 (g)) | 1 |
| Rear Suspension component pin or bush excessively worn mono linkage (5.3.4 (a) (i)) | 1 |
| Nearside Front Brake disc insecure (1.1.14 (a) (ii)) | 1 |
| Offside Front Brake disc insecure (1.1.14 (a) (ii)) | 1 |
| Offside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
| Front Valve stem seriously damaged (5.2.3 (j)) | 1 |
| Handlebar deformed to the extent that steering is affected |2.2.1 |c| |ii|| | 1 |
| Handlebar deformed |2.1.1b| | 1 |
| Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
| Nearside Front Footrest insecure |6.2.1a| | 1 |
| Rear Brake locking device insecure |3.2.A1e| | 1 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Offside Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Rear Drive chain worn to excess |6.2.1e| | 1 |
| Front position lamp incorrect colour |1.1.2a| | 1 |
| Nearside Rear Direction indicator insecure |1.5.3b| | 1 |
| Nearside Front Direction indicator insecure |1.5.3b| | 1 |
| Nearside Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Horn not working |1.7.3a| | 1 |
| Rear Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
| Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
| Front Brake caliper leaking (1.1.16 (b) (i)) | 1 |
| Outer Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Outer Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Lower Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Steering operation fouling on the fuel tank or bodywork on full lock hitting radiator cover (2.1.4 (b)) | 1 |
| Rear Brake excessively binding (1.2.1 (f)) | 1 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Offside Rear Exhaust excessively deteriorated |7.1.1a| | 1 |
| Brake lever is damaged and the brake cannot be readily applied |3.1.3c| | 1 |
| Brake pedal is damaged and the brake cannot be readily applied |3.1.3c| | 1 |
| Offside Front Motorcycle structure excessively damaged crash bar bent and insecure |6.1.1a| | 1 |
| Front Lower Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Offside Front Direction indicator likely to become detached (4.4.1 (c) (ii)) | 1 |
| Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Nearside Front Position lamp not working (4.2.1 (a)) | 1 |
| Drive chain excessively tight (6.1.7 (k) (i)) | 1 |
| Rear Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
| Brake reaction bracket insecure |3.2.A1j| | 1 |
| Nearside Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Nearside Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Stop lamp does not illuminate immediately a brake applies from front brake |1.3.1a| | 1 |
| Offside Headlamp aim projected beam image obviously incorrect Bulb incorrectly fitted (4.1.2 (c)) | 1 |
| Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
| Rear Stop lamp adversely affected by the operation of another lamp (4.3.3 (b)) | 1 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Rear Brake pedal not releasing correctly and functionality of brakes affected |1.1.2 |b| |ii|| | 1 |
| Rear Brake pedal pivot excessively tight |1.1.1 |a|| | 1 |
| Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |