| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 61 |
| Rear reflector on motorcycle missing |1.4.1| | 27 |
| Registration plate issues | 25 |
| Headlamp aim beam image kick up to the offside |1.6| | 17 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 12 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 11 |
| Registration plate lamp issues | 10 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 7 |
| Rear reflector missing (4.8.2 (a) (ii)) | 6 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 6 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
| Steering headbearing has excessive free play |2.2.2| | 6 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 6 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 5 |
| Offside Front Direction indicator not working |1.5.1c| | 5 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 5 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 5 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 5 |
| Offside Front Footrest insecure |6.2.1a| | 5 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 4 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
| Stop lamp not working (4.3.1 (a) (ii)) | 4 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 4 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 4 |
| Front wheel bearings are excessively rough |2.3.5b| | 4 |
| Nearside Rear Direction indicators not working |1.5.1c| | 4 |
| Drive chain excessively loose |6.2.1d| | 4 |
| Horn not working (7.7 (a)) | 3 |
| Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 3 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Exhaust markings indicating not for road use or similar wording |7.1.4| | 3 |
| Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 3 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 3 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 3 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
| Front Stop lamp not working |4.3.1 |a| |ii|| | 2 |
| Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 2 |
| Front Position lamp not working (4.2.1 (a)) | 2 |
| Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
| Rear Brake excessively binding (1.2.1 (f)) | 2 |
| Front Headlamp aim beam image kick up to the offside |1.6| | 2 |
| Horn not working (7.7 (a) (ii)) | 2 |
| Front Brake disc|s| is excessively distorted |3.2.A1m| | 2 |
| Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 2 |
| Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
| Nearside Front Brake disc|s| insecure |3.2.A1g| | 2 |
| Rear Position lamp not working (4.2.1 (a)) | 2 |
| Drive chain excessively tight |6.2.1d| | 2 |
| Steering movement excessively stiff with the wheel raised |2.2.1b| | 2 |
| Headlamp switch faulty |1.2.4| | 2 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
| Nearside Headlamp aim beam image kick up to the offside |1.6| | 2 |
| Offside Headlamp aim beam image kick up to the offside |1.6| | 2 |
| Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 2 |
| Rear Valve stem seriously damaged (5.2.3 (j)) | 2 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Centre Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
| Rear Stop lamp not working |4.3.1 |a| |ii|| | 2 |
| Offside Rear Direction indicators not working |1.5.1c| | 2 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Front Horn not working |1.7.3a| | 2 |
| Fairings insecure and likely to impede the steering |2.1.2e| | 2 |
| Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
| Handlebar deformed |2.1.1b| | 2 |
| Offside Front Direction indicators not working |1.5.1c| | 2 |
| Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 2 |
| Nearside Front Direction indicator not working |1.5.1c| | 2 |
| Drive chain worn to excess |6.2.1e| | 2 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 2 |
| Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 2 |
| Rear Position lamp not working |4.2.1 |a|| | 2 |
| Nearside Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
| Wheel alignment incorrect which adversely affects the handling |2.4 |a|| | 1 |
| Offside Front Locking devices not correctly fitted which may make the motor bicycle dangerous to ride footrest split pin missing from nut |6.2.1h| | 1 |
| Front Steering operation linkage fouling when handlebars turned from lock to lock cables x horn x electrical wires all fouling steering lock to lock (2.1.4 (a)) | 1 |
| Stop lamp not working with both controls (4.3.1 (a) (ii)) | 1 |
| Exhaust has a major leak of exhaust gases an insecure (6.1.2 (a)) | 1 |
| Valve stem seriously damaged FRONT AND REAR (5.2.3 (j)) | 1 |
| Rear Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
| Floor brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
| Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
| Rear Upper Shock absorber has an excessively worn bush (5.3.2 (c)) | 1 |
| Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| All direction indicators missing |4.4.1 |a| |ii|| | 1 |
| Rear reflector missing |4.8.2 |a| |ii|| | 1 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| All direction indicators missing (4.4.1 (a) (ii)) | 1 |
| All direction indicators not working all indicators missing (4.4.1 (a) (ii)) | 1 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Rear Brake caliper leaking banjo loose (1.1.16 (b) (i)) | 1 |
| Rear Direction indicator incorrect colour |1.5.1b| | 1 |
| Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
| Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Nearside Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Offside Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Offside Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Nearside Rear Direction indicator not working |1.5.1c| | 1 |
| Stop lamp does not illuminate immediately a brake applies rear control |1.3.1a| | 1 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Nearside Rear suspension fouling which affects the movement of the rear suspension |2.4.A.3a| | 1 |
| Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Front Brake disc contaminated (1.1.14 (b)) | 1 |
| Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
| Rear Brake caliper|s| insecure |3.2.A1j| | 1 |
| Centre Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Front position lamp deteriorated and function impaired |1.1.1b| | 1 |
| Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Offside Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Rear Lower Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| All direction indicators not working |4.4.1 |a| |ii|| | 1 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Front Position lamp not working sidelight/pilot light (4.2.1 (a)) | 1 |
| Offside Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
| Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Headlamp insecure |1.2.3b| | 1 |
| Nearside Footrest insecure |6.2.1a| | 1 |
| Nearside Front Direction indicators not working |1.5.1c| | 1 |
| Rear Position lamp missing |4.2.1 |a|| | 1 |
| Headlamp light intensity severely reduced (4.1.4 (a)) | 1 |
| Offside Rear Brake disc|s| has excessive run out |3.2.A1m| | 1 |
| Front Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
| Fuel system component leaking |7.2.1a| | 1 |
| Offside Front Handlebar deformed |2.1.1b| | 1 |
| Offside Front Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
| Nearside Direction indicators not working |1.5.1c| | 1 |
| Front Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
| Offside Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Offside Rear Brake pedal is inoperative |3.1.3c| | 1 |
| Clutch lever shortened so it cannot be readily operated. |6.2.1g| | 1 |
| Rear Exhaust mounting missing |7.1.1c| | 1 |
| Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
| Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
| Rear Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
| Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
| Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Front Motorcycle structure excessively distorted |6.1.1a| | 1 |
| Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
| Rear Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
| Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
| Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Headlamp insecure |4.1.1 |c|| | 1 |
| Rear Wheel alignment incorrect which adversely affects the handling towing to the right |2.5.1| | 1 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Rear suspension fouling which affects the movement of the rear suspension |2.4.A.3a| | 1 |
| Headlamp switch insecure |1.2.4| | 1 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Offside Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Offside Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
| Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Centre Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
| Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
| Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Offside Front Position lamp switch insecure |1.1.4b| | 1 |
| Front Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
| Front Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Rear Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Rear Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Rear Rear position lamp missing registration light |1.1.1a| | 1 |
| Offside Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Offside Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
| Offside Rear Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
| Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
| Nearside Rear Direction indicator missing |4.4.1 |a| |ii|| | 1 |
| Offside Rear Direction indicator missing |4.4.1 |a| |ii|| | 1 |
| Rear Stop lamp not working lever (4.3.1 (a) (ii)) | 1 |
| Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Exhaust mounting missing |7.1.1c| | 1 |
| Exhaust excessively deteriorated |7.1.1a| | 1 |
| Offside Front Brake hose leaking fluid |3.2.B4| | 1 |
| Offside Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
| Front Brake performance not tested |3.3| | 1 |
| Offside Front Footrest insecure |6.2.12 |a|| | 1 |
| Front position lamp incorrect colour were blue |1.1.2a| | 1 |
| Front Front position lamp missing |1.1.1a| | 1 |
| Rear Direction indicators not working |1.5.1c| | 1 |
| Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
| Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
| Rear Valve stem seriously damaged |5.2.3 |j|| | 1 |
| Central Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Steering headbearing has excessive wear or free play top yoke nut is loose |2.2.2 |f| |i|| | 1 |
| Front Direction indicator obviously incorrectly positioned |4.4.3 |a|| | 1 |
| Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 1 |
| Front Brake hose leaking fluid |3.2.B4| | 1 |
| Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Handlebar so insecure it is likely to become detached (2.2.1 (b) (ii)) | 1 |
| Wheel more than one fixing missing front wheel (5.2.1 (a) (ii)) | 1 |
| Rear Drive chain excessively loose |6.2.1d| | 1 |
| Offside Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Front Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
| Front Headlamp incorrect colour |1.2.1| | 1 |
| Offside Front Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Centre Rear Upper Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Fuel hose insecure |6.1.3 |a| |i|| | 1 |
| Rear Lower Shock absorber has an excessively worn bush (5.3.2 (c)) | 1 |
| Front Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Offside Front Brake disc|s| insecure |3.2.A1g| | 1 |
| Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Offside Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Front Horn not working (7.7 (a)) | 1 |
| Front All position lamps not working (4.2.1 (a)) | 1 |
| Front Headlamp aim projected beam image obviously incorrect dip switch working wrong way (4.1.2 (c)) | 1 |
| Front Shock absorber has a serious fluid leak forks leaking oil (5.3.2 (b)) | 1 |
| Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Nearside Front Lower Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Offside Front Lower Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Offside Rear Lower Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Offside Rear Lower Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
| Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
| Nearside Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
| Nearside Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Offside Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Rear Footrest missing |6.2.12 |a|| | 1 |
| Drive chain excessively tight |6.1.7 |k| |i|| | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
| Front Headlamp missing (4.1.1 (a) (ii)) | 1 |
| Front Headlamp incorrect colour (4.1.4 (a)) | 1 |
| Rear Brake fluid not visible (1.1.10 (d) (iii)) | 1 |
| Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Nearside Front Direction indicator incorrect colour |1.5.1b| | 1 |
| Horn is not continous or uniform |1.7.3c| | 1 |
| Nearside Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Offside Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Nearside Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Offside Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Nearside Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Offside Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Nearside Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Offside Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Nearside Rear Direction indicator insecure |1.5.3b| | 1 |
| Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Offside Front Stop lamp switch with a delay in operation (4.3.2 (a) (ii)) | 1 |
| Offside Rear Exhaust system insecure (6.1.2 (a)) | 1 |
| Front Headlamp aim so that beam "kick up" is not visible on the screen no definitive beam pattern, light showing above top line (4.1.2 (a)) | 1 |
| Nearside Handlebar mounting clamp bolt missing |2.1.1a| | 1 |
| Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
| Front Brake pipe inadequately supported |3.2.B2b| | 1 |
| Centre Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
| Headlamp insecure (4.1.1 (c)) | 1 |
| Throttle operating incorrectly |6.2.1f| | 1 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Offside Footrest insecure |6.2.1a| | 1 |
| Fuel hose leaking |7.2.1a| | 1 |
| Rear Exhaust system insecure (6.1.2 (a)) | 1 |
| Horn not working |1.7.3a| | 1 |
| Offside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
| Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Rear Lower Rear mono-shock insecure |2.4.B.4| | 1 |