>

MOT History from tests of petrol SUZUKI AY50s year 2000

Review the list of common SUZUKI AY50 failures below or to perform a specific mot history check on your SUZUKI then use our popular KnowYourCar service

mot history
Pass percent:71.84%
(The average a petrol SUZUKI AY50 year 2000 passes without issue)
Based on:586 MOT Tests
Most common failuresNo# failures
Headlamp aim out of alignment21
Exhaust is leaking and excessively noisey |7.1.1b|16
Steering headbearing has excessive free play |2.2.2|9
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|8
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|8
Rear shock absorber has inadequate damping effect. |2.4.A.3b|7
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|6
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c|6
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b|6
Registration plate issues6
Stop lamp does not illuminate immediately a brake applies |1.3.1a|5
Rear shock absorber seal failed and leaking oil |2.4.A.1c|5
Rear Roller brake test indicates a binding brake |3.3.A1a|5
Throttle operating incorrectly |6.2.1f|5
Front Steering headbearing has excessive free play |2.2.2|4
Direction indicators not working |1.5.1c|4
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a|4
Exhaust mounting does not fully support the exhaust system |7.1.1.c|4
Rear wheel bearings have excessive free play |2.4.A.2c|3
Riders seat insecure |6.2.1a|3
Horn not working |1.7.3a|3
Direction indicators flashing more than 120 times per minute |1.5.1c|3
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|3
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b|3
Direction indicators affected by the operation of another lamp |1.5.1c|3
Rear Position lamp not working (4.2.1 (a))3
Nearside Rear Footrest insecure |6.2.1a|2
Exhaust mounting missing |7.1.1c|2
Front wheel bearings have excessive free play |2.3.5b|2
Horn not loud enough to be heard by another road user |1.7.3a|2
Offside Rear Direction indicator damaged and function impaired |1.5.3a|2
Exhaust excessively deteriorated |7.1.1a|2
Front Fairings insecure and likely to impede the steering |2.1.2e|2
Steering movement excessively `notchy` with the wheel raised |2.2.1b|2
Rear Stop lamp affected by the operation of another lamp |1.3.2|2
Wheel alignment incorrect which adversely affects the steering |2.5.1|2
Nearside Front Direction indicator flashing less than 60 times a minute |1.5.1c|2
Rear suspension bush has excessive free play |2.4.A2a|i||2
Nearside Rear Direction indicator not working |1.5.1c|2
Wheel alignment incorrect which adversely affects the handling |2.5.1|2
Rear position lamp insecure |1.1.1c|2
Nearside Rear Direction indicator damaged and function impaired |1.5.3a|2
Front wheel bearings are excessively rough |2.3.5b|2
Nearside Rear Direction indicator insecure |1.5.3b|2
Rear reflector on motorcycle missing |1.4.1|2
Headlamp dipped beam affected by the operation of another lamp |1.2.2c|2
Rear Floor brake test indicates a binding brake |3.3.C2c|2
Nearside Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|2
Direction indicators flashing less than 60 times a minute |1.5.1c|2
Front Brake disc|s| excessively scored |3.2.A1l|2
Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c|2
Nearside Rear Direction indicators not working |1.5.1c|2
Handlebar mounting clamp bolt loose |2.1.1a|2
Front Horn not working |1.7.3a|2
Offside Steering lock stop ineffective |2.1.3|2
Rear Rear position lamp damaged and function impaired |1.1.1b|2
Rear Front mudguard insecure |2.3.7|2
Nearside Steering lock stop ineffective |2.1.3|2
Steering headbearing has excessive wear or free play (2.2.2 (f) (i))2
Exhaust system insecure (6.1.2 (a))2
Exhaust has a major leak of exhaust gases (6.1.2 (a))2
Rear Wheel bearing has excessive play (5.1.3 (a) (i))2
Front Lower Rear suspension bush has excessive free play engine mounts |2.4.A2a|i||1
Front Lower Rear suspension bush excessively deteriorated |2.4.A2a|i||1
Offside Front Front suspension assembly component cracked |2.3.1|1
Offside Rear Exhaust is leaking and excessively noisey |7.1.1b|1
Front Headlamp aim not tested |1.6|1
Offside An item not tested |Manual|1
An item not tested |Manual|1
Headlamp deteriorated and function impaired |1.2.3a|1
Rear Roller brake test indicates a sticking brake |3.3.A1a|1
Rear Direction indicators not working |1.5.1c|1
All position lamps adversely affected by the operation of another lamp |1.1.3b|1
Rear Brake caliper|s| insecure |3.2.A1j|1
Rear Hydraulic brake control feels spongy |3.1.4a|1
Front Stop lamp affected by the operation of another lamp |1.3.2|1
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a|1
Front Brake lever is positioned so that the brake cannot be readily applied |3.1.3c|1
Front suspension assembly component excessively misaligned |2.3.1|1
Front Brake pipe excessively chafed |3.2.B2a|1
Offside Front Steering lock stop ineffective |2.1.3|1
Nearside Front shock absorber seal failed and leaking oil |2.3.3|1
Offside Front shock absorber seal failed and leaking oil |2.3.3|1
Rear Brake disc|s| excessively worn |3.2.A1l|1
Nearside Front Direction indicator not working |1.5.1c|1
Vehicle identification number not permanently displayed |6.3.5a|1
Headlamp aim not tested |1.6|1
Centre Rear Upper Stop lamp does not illuminate immediately a brake applies |1.3.1a|1
Centre Front Lower Direction indicators not working |1.5.1c|1
Inner Front Upper Horn control not functioning. |1.7.2b|1
Nearside Rear Upper Brake master cylinder leaking hydraulic fluid |3.2.B1e|1
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a|1
Front Hydraulic brake control feels spongy |3.1.4a|1
Rear Brake lever is so short and the brake cannot be readily applied |3.1.3c|1
Front Brake lever is so short and the brake cannot be readily applied |3.1.3c|1
Nearside Rear Direction indicator flashing less than 60 times a minute |1.5.1c|1
Rear suspension bush excessively deteriorated |2.4.A2a|i||1
Headlamp switch faulty |1.2.4|1
Motorcycle structure excessively distorted |6.1.1a|1
Offside Direction indicator not working |1.5.1c|1
Front Motorcycle structure excessively damaged |6.1.1a|1
Front Upper Motorcycle structure excessively damaged |6.1.1a|1
Centre Rear Lower Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c|1
Nearside Rear Direction indicator deteriorated and function impaired |1.5.3a|1
Rear Brake lever has inadequate reserve travel |3.1.3b|1
Front Front shock absorber seal failed and leaking oil |2.3.3|1
Rear Rear position lamp incorrect colour |1.1.2b|1
Front Front suspension assembly component excessively bent |2.3.1|1
Rear Exhaust is leaking and excessively noisey |7.1.1b|1
Offside Front Direction indicators not working |1.5.1c|1
Offside Direction indicators flashing less than 60 times a minute |1.5.1c|1
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c|1
Offside Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2|1
Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|1
Rear Footrest insecure |6.2.1a|1
Rear Rear position lamp adversely affected by the operation of another lamp |1.1.3b|1
Offside Rear Direction indicator insecure |1.5.3b|1
Rear Roller brake test indicates a severely grabbing brake |3.3.A1b|1
Front Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4|1
Rear Rear wheel rotation likely to be impeded |6.2.1b|1
Nearside Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b|1
Front Brake lever has inadequate reserve travel |3.1.3b|1
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|1
Front Brake master cylinder leaking hydraulic fluid |3.2.B1e|1
Offside Brake lever has inadequate reserve travel |3.1.3b|1
Brake master cylinder fluid level dangerously low |3.2.B1d|1
Brake master cylinder leaking hydraulic fluid |3.2.B1e|1
Rear mono-shock pivot excessively worn |2.4.B.4|1
Rear Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c|1
Front Handlebar deformed |2.1.1b|1
Rear Rear suspension bush has excessive free play |2.4.A2a|i||1
Steering movement excessively stiff with the wheel raised |2.2.1b|1
Throttle operating incorrectly THROTTLE STICKS. BIKE CREEPS FORWARD |6.2.1f|1
Stop lamp affected by the operation of another lamp |1.3.2|1
Rear position lamp adversely affected by the operation of another lamp |1.1.3b|1
Horn is not continous or uniform |1.7.3c|1
Front suspension has excessive stiffness in the suspension movement. |2.3.6b|1
Indicator switch defective |1.5.4|1
Front suspension assembly excessive wear or free play in a front suspension component |2.3.4|1
Offside Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|1
Rear wheel rotation likely to be impeded |6.2.1b|1
Rear Rear reflector on motorcycle missing |1.4.1|1
Rear Direction indicators flashing more than 120 times per minute |1.5.1c|1
Front Direction indicators flashing more than 120 times per minute |1.5.1c|1
Handlebar mounting clamp loose |2.1.1a|1
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h|1
Offside Exhaust is leaking and excessively noisey |7.1.1b|1
Brake pipe excessively corroded1
Front Exhaust excessively deteriorated |7.1.1a|1
Rear Brake disc|s| excessively scored |3.2.A1l|1
Front Direction indicator damaged and function impaired |1.5.3a|1
Centre Front Front suspension assembly has excessive free play in the pivot bearings. |2.3.2|1
Offside Rear Upper Direction indicators not working |1.5.1c|1
Nearside Front Lower Brake component worn and seriously reduced in strength |3.2.A1|1
Offside Front Lower Exhaust mounting does not fully support the exhaust system |7.1.1.c|1
Offside Rear shock absorber seal failed and leaking oil |2.4.A.1c|1
Brake lever has inadequate reserve travel |3.1.3b|1
Front Roller brake test indicates a binding brake |3.3.A1a|1
Rear Rear position lamp deteriorated and function impaired |1.1.1b|1
Rear Fairings insecure and likely to impede the steering |2.1.2e|1
Offside Rear Direction indicator not working |1.5.1c|1
Rear All position lamps do not illuminate immediately when switched on |1.1.3a|1
Offside Rear Direction indicators not working |1.5.1c|1
Offside Front Throttle operating incorrectly |6.2.1f|1
Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h|1
Offside Rear Lower Brake locking device insecure |3.2.A1e|1
Inner Front Upper Steering headbearing has excessive free play |2.2.2|1
Front Brake component worn and seriously reduced in strength |3.2.A1|1
Rear Brake component worn and seriously reduced in strength |3.2.A1|1
Fairings so located that it is likely to impede the steering refit front fairing |2.1.2e|1
Brake effort inadequate at a wheel |1.2.1 |a| |i||1
Front Brake lagging in operation |1.2.1 |d||1
Rear Brake hose leaking contamination from brake fluid noted |1.1.12 |c||1
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i||1
Offside Rear Direction indicator not working (4.4.1 (a) (ii))1
Riders seat insecure (6.2.5 (a) (ii))1
All direction indicators not working (4.4.1 (a) (ii))1
Offside Front Stop lamp does not illuminate by the operation of both brake controls Brake light does not illuminate when operating front brake lever (4.3.2 (a) (iii))1
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a))1
All direction indicators not working Battery dead. (4.4.1 (a) (ii))1
Front Stop lamp not working Battery dead (4.3.1 (a) (ii))1
Rear Stop lamp not working Battery dead (4.3.1 (a) (ii))1
Horn sound not in accordance with requirements Battery dead (7.7 (c))1
Stop lamp not working when front brake applied. (4.3.1 (a) (ii))1
Headlamp not working on dipped beam (4.1.1 (a) (ii))1
Registration plate lamp issues1
Headlamp not working on main beam (4.1.1 (a) (ii))1
Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii))1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy