| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 15 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 11 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 10 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 10 |
| Rear Brake lever has inadequate reserve travel |3.1.3b| | 8 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 7 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 7 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
| Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 6 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 5 |
| Rear reflector on motorcycle missing |1.4.1| | 5 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
| Stop lamp remains on when the brake is released |1.3.1e| | 5 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 5 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 5 |
| Horn not working |1.7.3a| | 4 |
| Front Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
| Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 3 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 3 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
| Front suspension has inadequate damping effect. |2.3.6c| | 3 |
| Steering movement excessively stiff with the wheel raised |2.2.1b| | 3 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 3 |
| Stop lamp affected by the operation of another lamp |1.3.2| | 2 |
| Nearside Direction indicator not working |1.5.1c| | 2 |
| Offside Direction indicator not working |1.5.1c| | 2 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 2 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
| Handlebar mounting clamp bolt loose |2.1.1a| | 2 |
| Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 2 |
| Front Brake lever cannot be applied smoothly |3.1.3d| | 2 |
| Steering headbearing has excessive free play |2.2.2| | 2 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
| Rear reflector on motorcycle obscured |1.4.1| | 2 |
| Motorcycle structure excessively corroded |6.1.1a| | 2 |
| Stop lamp not working (4.3.1 (a) (ii)) | 2 |
| Exhaust excessively deteriorated |7.1.1a| | 1 |
| Nearside Front Direction indicators not working |1.5.1c| | 1 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Front Upper Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
| Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
| Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
| Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
| Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
| Direction indicators not working |1.5.1c| | 1 |
| Centre Front Upper Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
| Centre Front Upper Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
| Centre Rear Lower Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Nearside Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
| Offside Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
| Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
| Offside Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Horn sounds harsh or grating |1.7.3c| | 1 |
| Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Horn is not a constant note |1.7.3c| | 1 |
| Front Steering headbearing has excessive free play |2.2.2| | 1 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Upper Steering headbearing has excessive free play |2.2.2| | 1 |
| Hydraulic brake control feels spongy |3.1.4a| | 1 |
| Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Riders seat insecure |6.2.1a| | 1 |
| Indicator switch defective |1.5.4| | 1 |
| Headlamp aim not tested |1.6| | 1 |
| Offside Indicator switch does not operate the direction indicators on the side selected |1.5.4| | 1 |
| Rear Brake linkage has abnormal movement due to maladjustment |3.2.A1i| | 1 |
| Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Direction indicator not working |1.5.1c| | 1 |
| Horn is not continous or uniform |1.7.3c| | 1 |
| Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Brake linkage has abnormal movement due to excessive wear |3.2.A1i| | 1 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Front Brake master cylinder has a seized master cylinder pivot. |3.2.B5| | 1 |
| Motorcycle structure excessively damaged |6.1.1a| | 1 |
| Brake pipe excessively corroded | 1 |
| Steering movement excessively rough with the weight on the lower bearing |2.2.1a| | 1 |
| Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
| Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
| Offside Front Upper Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Centre Rear Lower Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
| Offside Front Lower Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Front Front position lamp insecure |1.1.1c| | 1 |
| Front Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
| Rear Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
| Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Nearside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
| Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
| Nearside Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Offside Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Front suspension fouling which affects the movement of the front suspension. |2.3.6a| | 1 |
| Front Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Vehicle identification number not legible |6.3.5a| | 1 |
| Front Hydraulic brake control creeps under load. |3.1.4a| | 1 |
| Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
| Offside Front Front suspension fouling which affects the movement of the front suspension. |2.3.6a| | 1 |
| Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
| Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
| Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Front Upper Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Front Lower Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Rear Lower Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Lower Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 1 |
| Front Horn not working |1.7.3a| | 1 |
| Front Stop lamp does not emit a steady light |1.3.1b| | 1 |
| Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
| Front Brake lever cannot be released smoothly |3.1.3d| | 1 |
| Rear Brake cable knotted |3.2.A1b| | 1 |
| Handlebar mounting clamp loose |2.1.1a| | 1 |
| All direction indicators not working indicators dont flash (4.4.1 (a) (ii)) | 1 |
| Rear Position lamp not working (4.2.1 (a)) | 1 |