MOT History from tests of petrol SUZUKI AN650As year 2007

Review the list of common SUZUKI AN650A failures below or to perform a specific mot history check on your SUZUKI then use our popular KnowYourCar service

mot history

Pass percent:85.07%

(The average a petrol SUZUKI AN650A year 2007 passes without issue)

Based on:134 MOT Tests

Most common failures	No# failures
Front Roller brake test indicates a binding brake \|3.3.A1a\|	4
Rear Roller brake test indicates a binding brake \|3.3.A1a\|	2
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Front Brake component is excessively corroded \|3.1.5\|	2
Stop lamp not working front brake switch (4.3.1 (a) (ii))	1
Registration plate lamp issues	1
Offside Front Brake disc contaminated (1.1.14 (b))	1
Front Floor brake test indicates a binding brake \|3.3.C2c\|	1
Rear Stop lamp not working \|4.3.1 \|a\| \|ii\|\|	1
Nearside Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	1
Offside Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	1
Offside Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	1
Rear Brake disc\|s\| excessively scored \|3.2.A1l\|	1
Rear Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	1
Rear Roller brake test indicates a severely grabbing brake \|3.3.A1b\|	1
Rear position lamp adversely affected by the operation of another lamp \|1.1.3b\|	1
Stop lamp affected by the operation of another lamp \|1.3.2\|	1
Stop lamp remains on when the brakes are released	1
Rear Brake component is excessively corroded \|3.1.5\|	1
Front Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	1
Offside Front Brake disc\|s\| has excessive run out \|3.2.A1m\|	1
Front Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	1
Nearside Front Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	1
Offside Front Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	1
Rear Wheel bearing play so excessive it is likely to break up \|5.1.3 \|a\| \|ii\|\|	1
Headlamp aim out of alignment	1
Horn not working \|1.7.3a\|	1
Front Brake excessively binding (1.2.1 (f))	1
Rear Brake excessively binding (1.2.1 (f))	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Front Roller brake test indicates a binding brake \|3.3.A1a\|	4
Rear Roller brake test indicates a binding brake \|3.3.A1a\|	2
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Front Brake component is excessively corroded \|3.1.5\|	2
Stop lamp not working front brake switch (4.3.1 (a) (ii))	1
Registration plate lamp issues	1
Offside Front Brake disc contaminated (1.1.14 (b))	1
Front Floor brake test indicates a binding brake \|3.3.C2c\|	1
Rear Stop lamp not working \|4.3.1 \|a\| \|ii\|\|	1
Nearside Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	1
Offside Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	1
Offside Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	1
Rear Brake disc\|s\| excessively scored \|3.2.A1l\|	1
Rear Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	1
Rear Roller brake test indicates a severely grabbing brake \|3.3.A1b\|	1
Rear position lamp adversely affected by the operation of another lamp \|1.1.3b\|	1
Stop lamp affected by the operation of another lamp \|1.3.2\|	1
Stop lamp remains on when the brakes are released	1
Rear Brake component is excessively corroded \|3.1.5\|	1
Front Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	1
Offside Front Brake disc\|s\| has excessive run out \|3.2.A1m\|	1
Front Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	1
Nearside Front Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	1
Offside Front Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	1
Rear Wheel bearing play so excessive it is likely to break up \|5.1.3 \|a\| \|ii\|\|	1
Headlamp aim out of alignment	1
Horn not working \|1.7.3a\|	1
Front Brake excessively binding (1.2.1 (f))	1
Rear Brake excessively binding (1.2.1 (f))	1

MOT History from tests of petrol SUZUKI AN650As year 2007

Find us on Facebook