Most common failures | No# failures |
---|
Front Roller brake test indicates a binding brake |3.3.A1a| | 32 |
Headlamp aim out of alignment | 18 |
Front Brake excessively binding (1.2.1 (f)) | 10 |
Front Brake excessively binding |1.2.1 |f|| | 5 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 5 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 5 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 5 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 4 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 3 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) | 3 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 3 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Rear Brake excessively binding (1.2.1 (f)) | 2 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Headlamp not working on main beam |4.1.1 |a| |ii|| | 2 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 2 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
Front Valve stem seriously damaged (5.2.3 (j)) | 2 |
Horn not working (7.7 (a) (ii)) | 2 |
Horn not working |1.7.3a| | 2 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Front Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Steering headbearing in such a condition that steering control is adversely affected notchy |2.2.2 |f| |ii|| | 1 |
Throttle control functioning such that safe operation of the motorcycle is adversely affected sticking |6.2.7 |a| |ii|| | 1 |
Front Exhaust mounting missing |7.1.1c| | 1 |
Headlamp aim not tested lamp has main beam on permanently, dip switch appears to be working back to front. |4.1.2 |b|| | 1 |
Front Horn not working (7.7 (a) (ii)) | 1 |
Front Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
Nearside Rear Position lamp not working (4.2.1 (a) (ii)) | 1 |
Headlamp aim not tested |1.6| | 1 |
Offside Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Nearside Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Nearside Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Offside Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Stop lamp not working inop when front brake operated (4.3.1 (a) (ii)) | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Offside Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Offside Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Headlamp aim not tested |4.1.2 |b|| | 1 |
Brake hose damaged | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Rear Brake excessively binding |1.2.1 |f|| | 1 |
Front Stop lamp not working lever |4.3.1 |a| |ii|| | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Rear Brake caliper|s| securing bolt|s| missing |3.2.A1j| | 1 |
Front Brake master cylinder fluid level dangerously low |3.2.B1d| | 1 |
Front Front mudguard insecure |2.3.7| | 1 |
Offside Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |swing arm bracket bolts hanging out| |6.2.1h| | 1 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Central Front Shock absorber has a serious fluid leak both fork seals |5.3.2 |b|| | 1 |
Horn sound not in accordance with requirements (7.7 (c)) | 1 |
Headlamp light intensity severely reduced (4.1.4 (a)) | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a)) | 1 |
Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
Nearside Front Brake disc|s| cracked |3.2.A1g| | 1 |
Offside Front Stop lamp not working front brake light switch inop |4.3.1 |a| |ii|| | 1 |
Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Offside Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Front Headlamp incorrect colour |1.2.1| | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Front Plate brake test indicates a binding brake |3.3.B1a| | 1 |
Stop lamp remains on when the brakes are released | 1 |
Brake component has restricted free movement and operation is likely to be impeded front caliper binding to excess-high risk of wheel `locking` |3.2.A1h| | 1 |
Front Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
Headlamp aim not tested (4.1.2 (b)) | 1 |
Front Stop lamp not working stop light switch (4.3.1 (a) (ii)) | 1 |
Rear Brake component insecure rear caliper lower bolt hanging out (1.1.21 (c)) | 1 |
Central Front Brake excessively binding (1.2.1 (f)) | 1 |
Central Front Steering headbearing excessively stiff or notchy set in head racess (2.2.2 (f) (i)) | 1 |
Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Nearside Front Headlamp aim not tested (4.1.2 (b)) | 1 |
Front Brake grabbing severely (1.2.1 (c)) | 1 |
Front Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Offside Front Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 1 |
Central Front Lower Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Central Front Lower Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Front Brake master cylinder severely corroded |3.2.B1b| | 1 |
Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Registration plate lamp issues | 1 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Rear reflector on motorcycle missing |1.4.1| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Fairings so located that it is likely to impede the steering |2.1.2e| | 1 |
Nearside Steering lock stop ineffective |2.1.3| | 1 |
Offside Steering lock stop ineffective |2.1.3| | 1 |
Roller brake test indicates a binding brake both front and rear |3.3.A1a| | 1 |
Offside Front Position lamp not working (4.2.1 (a)) | 1 |
Front Stop lamp not working Switch (4.3.1 (a) (ii)) | 1 |
Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
Steering operation linkage fouling when handlebars turned from lock to lock (2.1.4 (a)) | 1 |
Rear Brake component modification adversely affecting braking performance caliper binding to excess |1.1.21 |d| |ii|| | 1 |
Front Brake component has restricted free movement and operation is likely to be impeded front calipers binding to excess, restricting free rotation of wheel |3.2.A1h| | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Nearside Front suspension assembly component excessively corroded. |2.3.1| | 1 |
Offside Front suspension assembly component excessively corroded. |2.3.1| | 1 |
Brake excessively binding Front |1.2.1 |f|| | 1 |
Front Stop lamp does not emit a steady light |1.3.1b| | 1 |
Rear Stop lamp does not emit a steady light |1.3.1b| | 1 |
Front Hydraulic brake control creeps under load. |3.1.4a| | 1 |
Nearside Brake master cylinder fluid level dangerously low |3.2.B1d| | 1 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Nearside Front Brake disc contaminated (1.1.14 (b)) | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Registration plate issues | 1 |
Nearside Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Front Headlamp light source and lamp not compatible bulb incorectly fitted on dippd beam (4.1.4 (c)) | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
Front Steering headbearing excessively stiff or notchy |2.2.2 |f| |i|| | 1 |
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Offside Rear Position lamp not working (4.2.1 (a)) | 1 |