Most common failures | No# failures |
---|
Headlamp aim out of alignment | 34 |
Front wheel bearings are excessively rough |2.3.5b| | 13 |
Registration plate lamp issues | 13 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 9 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 8 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 8 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Exhaust is leaking and excessively noisey |7.1.1b| | 7 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 5 |
Front Front wheel bearings are excessively rough |2.3.5b| | 5 |
Front wheel bearings have excessive free play |2.3.5b| | 5 |
Stop lamp remains on when the brakes are released | 4 |
Front Valve stem seriously damaged (5.2.3 (j)) | 4 |
Headlamp aim beam image kick up to the offside |1.6| | 3 |
Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 3 |
Horn not working (7.7 (a)) | 3 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 3 |
Front Hydraulic brake control feels spongy |3.1.4a| | 3 |
Nearside Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Offside Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Registration plate issues | 2 |
Handlebar mounting clamp bolt loose |2.1.1a| | 2 |
Throttle operating incorrectly |6.2.1f| | 2 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Rear Hydraulic brake control feels spongy |3.1.4a| | 2 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Exhaust excessively deteriorated |7.1.1a| | 2 |
Rear Stop lamp emits other than a steady red light |1.3.1b| | 2 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Rear wheel bearings are excessively rough |2.4.A.2c| | 2 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
Throttle operating incorrectly |6.2.7 |a| |i|| | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Front Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Rear Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Brake hose damaged | 1 |
Offside Front Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Front wheel spindle loose |2.3.5a| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Brake lever cannot be released smoothly |3.1.3d| | 1 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Nearside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Central Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Front wheel has a missing wheel nut|s| |4.2.3a| | 1 |
Front Riders seat insecure |6.2.1a| | 1 |
Nearside Front Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
Offside Front Stop lamp not working switch |4.3.1 |a| |ii|| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Front Position lamp not working (4.2.1 (a)) | 1 |
Front Brake disc|s| cracked |3.2.A1g| | 1 |
Offside Front Upper Horn sounds harsh or grating |1.7.3c| | 1 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Front Exhaust mounting missing |7.1.1c| | 1 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Front wheel insecure front wheel berings |4.2.3b| | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Centre Rear Lower Vehicle identification number has more than one different number displayed |6.3.5b| | 1 |
Front Plate brake test indicates a binding brake |3.3.B1a| | 1 |
Rear Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Rear Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Rear Rear suspension bearing has excessive free play rear suspension bearings missing |2.4.A2a|i|| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Offside Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Steering operation fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Offside Front Suspension component fractured (5.3.3 (b) (ii)) | 1 |
Front Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Nearside Handlebar grip insecure to handlebar fitted a hose clip to secure at customer request (2.2.1 (d) (ii)) | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Centre Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Centre Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Horn not working |1.7.3a| | 1 |
Dipswitch does not extinquish main beam/s, leaving at least 1 dipped beam headlamp |1.2.2b|i|| | 1 |
Central Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Central Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Stop lamp not working front brake (4.3.1 (a) (ii)) | 1 |
Rear Valve stem seriously damaged (5.2.3 (j)) | 1 |
Rear Brake excessively binding (1.2.1 (f)) | 1 |
Rear Exhaust has a major leak of exhaust gases at muffler joint to downpipe |6.1.2 |a|| | 1 |
Rear Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 1 |
Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Headlamp incorrect colour |1.2.1| | 1 |
Nearside Direction indicators not working |1.5.1c| | 1 |
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Offside Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Front Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Front Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Rear Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Rear Brake caliper|s| insecure |3.2.A1j| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Leg shield insecure and likely to impede the steering |2.1.2e| | 1 |
Nearside Rear position lamp incorrect colour |1.1.2b| | 1 |
Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Roller brake test brake efficiency less than 27.5% overall (1.2.2 (a) (ii)) | 1 |
Sidecar rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Front Brake grabbing severely |1.2.1 |c|| | 1 |
Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Rear Brake disc|s| is excessively distorted |3.2.A1m| | 1 |