MOT History from tests of petrol SUZUKI AN125s year 1996

Review the list of common SUZUKI AN125 failures below or to perform a specific mot history check on your SUZUKI then use our popular KnowYourCar service

mot history

Pass percent:73.30%

(The average a petrol SUZUKI AN125 year 1996 passes without issue)

Based on:176 MOT Tests

Most common failures	No# failures
Steering headbearing has excessive free play \|2.2.2\|	7
Front Roller brake test indicates a binding brake \|3.3.A1a\|	5
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	5
Rear Roller brake test indicates a binding brake \|3.3.A1a\|	5
Nearside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	4
Headlamp aim out of alignment	4
Offside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	3
Front shock absorber seal failed and leaking oil \|2.3.3\|	3
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	2
Rear Stop lamp remains on when the brake is released \|1.3.1e\|	2
Nearside Front shock absorber seal failed and leaking oil \|2.3.3\|	2
Offside Front Direction indicator insecure \|1.5.3b\|	2
Rear Brake lever has inadequate reserve travel \|3.1.3b\|	2
Exhaust is leaking and excessively noisey \|7.1.1b\|	2
Front Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	2
Front Front shock absorber seal failed and leaking oil \|2.3.3\|	2
Front Brake disc\|s\| excessively worn \|3.2.A1l\|	2
Nearside Rear Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	1
Front Brake lever cannot be applied smoothly \|3.1.3d\|	1
Nearside Front Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	1
Offside Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Throttle operating incorrectly \|6.2.1f\|	1
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort \|3.3.A1c\|	1
Front Brake disc\|s\| friction surface contaminated by oil or grease \|3.2.A1k\|	1
An item not tested \|Manual\|	1
Fuel cap does not fasten securely by a positive means \|7.2.2b\|	1
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b))	1
Offside Rear Direction indicator incorrect colour \|1.5.1b\|	1
Front position lamp insecure \|1.1.1c\|	1
Rear Brake lever is bent and the brake cannot be readily applied \|3.1.3c\|	1
Rear Brake lever has insufficient reserve travel \|1.1.2 \|a\|\|	1
Exhaust has a major leak of exhaust gases \|6.1.2 \|a\|\|	1
Centre Front Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	1
Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	1
Fuel cap does not fasten securely maintaining the sealing arrangement \|7.2.2b\|	1
Front Steering headbearing has excessive free play \|2.2.2\|	1
Handlebar mounting clamp loose \|2.1.1a\|	1
Rear wheel has a loose wheel nut\|s\| \|4.2.3a\|	1
Handlebar mounting clamp bolt loose \|2.1.1a\|	1
Offside Rear Exhaust excessively deteriorated \|7.1.1a\|	1
Wheel alignment incorrect which adversely affects the steering \|2.5.1\|	1
Exhaust excessively deteriorated \|7.1.1a\|	1
Horn not loud enough to be heard by another road user \|1.7.3a\|	1
Front Brake disc\|s\| securing bolt\|s\| loose \|3.2.A1g\|	1
Front Brake lever is bent and the brake cannot be readily applied \|3.1.3c\|	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Steering headbearing has excessive free play \|2.2.2\|	7
Front Roller brake test indicates a binding brake \|3.3.A1a\|	5
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	5
Rear Roller brake test indicates a binding brake \|3.3.A1a\|	5
Nearside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	4
Headlamp aim out of alignment	4
Offside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	3
Front shock absorber seal failed and leaking oil \|2.3.3\|	3
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	2
Rear Stop lamp remains on when the brake is released \|1.3.1e\|	2
Nearside Front shock absorber seal failed and leaking oil \|2.3.3\|	2
Offside Front Direction indicator insecure \|1.5.3b\|	2
Rear Brake lever has inadequate reserve travel \|3.1.3b\|	2
Exhaust is leaking and excessively noisey \|7.1.1b\|	2
Front Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	2
Front Front shock absorber seal failed and leaking oil \|2.3.3\|	2
Front Brake disc\|s\| excessively worn \|3.2.A1l\|	2
Nearside Rear Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	1
Front Brake lever cannot be applied smoothly \|3.1.3d\|	1
Nearside Front Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	1
Offside Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Throttle operating incorrectly \|6.2.1f\|	1
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort \|3.3.A1c\|	1
Front Brake disc\|s\| friction surface contaminated by oil or grease \|3.2.A1k\|	1
An item not tested \|Manual\|	1
Fuel cap does not fasten securely by a positive means \|7.2.2b\|	1
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b))	1
Offside Rear Direction indicator incorrect colour \|1.5.1b\|	1
Front position lamp insecure \|1.1.1c\|	1
Rear Brake lever is bent and the brake cannot be readily applied \|3.1.3c\|	1
Rear Brake lever has insufficient reserve travel \|1.1.2 \|a\|\|	1
Exhaust has a major leak of exhaust gases \|6.1.2 \|a\|\|	1
Centre Front Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	1
Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	1
Fuel cap does not fasten securely maintaining the sealing arrangement \|7.2.2b\|	1
Front Steering headbearing has excessive free play \|2.2.2\|	1
Handlebar mounting clamp loose \|2.1.1a\|	1
Rear wheel has a loose wheel nut\|s\| \|4.2.3a\|	1
Handlebar mounting clamp bolt loose \|2.1.1a\|	1
Offside Rear Exhaust excessively deteriorated \|7.1.1a\|	1
Wheel alignment incorrect which adversely affects the steering \|2.5.1\|	1
Exhaust excessively deteriorated \|7.1.1a\|	1
Horn not loud enough to be heard by another road user \|1.7.3a\|	1
Front Brake disc\|s\| securing bolt\|s\| loose \|3.2.A1g\|	1
Front Brake lever is bent and the brake cannot be readily applied \|3.1.3c\|	1

MOT History from tests of petrol SUZUKI AN125s year 1996

Find us on Facebook