>

MOT History from tests of petrol SUZUKI ANs year 2007

Review the list of common SUZUKI AN failures below or to perform a specific mot history check on your SUZUKI then use our popular KnowYourCar service

mot history
Pass percent:87.09%
(The average a petrol SUZUKI AN year 2007 passes without issue)
Based on:1,572 MOT Tests
Most common failuresNo# failures
Front Roller brake test indicates a binding brake |3.3.A1a|32
Rear Roller brake test indicates a binding brake |3.3.A1a|14
Exhaust is leaking and excessively noisey |7.1.1b|9
Front Brake excessively binding (1.2.1 (f))9
Headlamp aim out of alignment9
Front Floor brake test indicates a binding brake |3.3.C2c|8
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|7
Front wheel bearings have excessive free play |2.3.5b|7
Front Brake excessively binding |1.2.1 |f||7
Registration plate issues6
Stop lamp does not illuminate immediately a brake applies |1.3.1a|6
Horn not working |1.7.3a|6
Front Front wheel bearings have excessive free play |2.3.5b|6
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||5
Headlamp not working on dipped beam (4.1.1 (a) (ii))5
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|5
Nearside Front shock absorber seal failed and leaking oil |2.3.3|4
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a|4
Front Stop lamp not working (4.3.1 (a) (ii))4
Nearside Front Brake disc|s| cracked |3.2.A1g|3
Exhaust has a major leak of exhaust gases |6.1.2 |a||3
Rear wheel bearings have excessive free play |2.4.A.2c|3
Registration plate lamp issues3
Headlamp not working on dipped beam |4.1.1 |a| |ii||3
Rear Stop lamp not working (4.3.1 (a) (ii))3
Offside Front shock absorber seal failed and leaking oil |2.3.3|2
Front Valve stem seriously damaged (5.2.3 (j))2
Nearside Front Roller brake test indicates a binding brake |3.3.A1a|2
Nearside Front Brake disc fractured (1.1.14 (a) (ii))2
Horn not working (7.7 (a) (ii))2
Rear Brake excessively binding (1.2.1 (f))2
Front Wheel bearing has excessive play |5.1.3 |a| |i||2
Headlamp at least one does not illuminate on main beam |1.2.2a|ii||2
Rear Stop lamp not working |4.3.1 |a| |ii||2
Rear Brake disc|s| excessively scored |3.2.A1l|2
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b))2
Rear Wheel bearing has excessive play |5.1.3 |a| |i||2
Front Roller brake test indicates a sticking brake |3.3.A1a|2
Steering operation restricted in free movement from lock to lock |2.1.4 |c||1
Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))1
Rear Brake lever cannot be applied smoothly |3.1.3d|1
Front Roller brake test indicates a binding brake both calipers |3.3.A1a|1
Stop lamp not working |4.3.1 |a| |ii||1
Front Shock absorber has a serious fluid leak (5.3.2 (b))1
Steering linkage component insecure |2.1.3 |a| |i||1
Nearside Direction indicator flashing less than 60 times a minute |1.5.1c|1
Front Brake disc|s| cracked |3.2.A1g|1
Rear Indicator switch does not operate the direction indicators on the side selected |1.5.4|1
Front Brake locking device insecure |3.2.A1e|1
Front Brake disc|s| excessively worn |3.2.A1l|1
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|1
Roller brake test indicates a binding brake |3.3.A1a|1
Nearside Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|1
Stop lamp does not illuminate by the operation of both brake controls front control inoperative (4.3.2 (a) (iii))1
Rear Wheel bearing has excessive play (5.1.3 (a) (i))1
Nearside Front Brake component worn and seriously reduced in strength |3.2.A1|1
Nearside Front Brake component cracked and seriously reduced in strength |3.2.A1|1
Front Brake lever has inadequate reserve travel |3.1.3b|1
Offside Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|1
Nearside Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b|1
Offside Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b|1
Rear Stop lamp not working brake applied (4.3.1 (a) (ii))1
Stop lamp affected by the operation of another lamp |1.3.2|1
Nearside Front Brake lever insecure Rear brake lever locking bolt loose (1.1.2 (e) (i))1
Offside Front Front shock absorber seal failed and leaking oil |2.3.3|1
Front Brake disc|s| has excessive run out |3.2.A1m|1
Steering movement excessively `notchy` with the wheel raised |2.2.1b|1
Headlamp aim projected beam image obviously incorrect (4.1.2 (c))1
Front shock absorber seal failed and leaking oil |2.3.3|1
Stop lamp remains on when the brakes are released1
Steering headbearing has excessive free play |2.2.2|1
Rear Roller brake test indicates a severely grabbing brake |3.3.A1b|1
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i))1
Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c|1
Front Stop lamp not working |4.3.1 |a| |ii||1
Rear Brake disc fractured |1.1.14 |a| |ii||1
Rear Brake excessively binding |1.2.1 |f||1
Front Headlamp aim not tested (4.1.2 (b))1
Offside Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|1
Rear Rear spring corroded and seriously weakened |2.4A1b|ii||1
Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h|1
Steering headbearing has excessive wear or free play |2.2.2 |f| |i||1
Offside Front Brake disc fractured Cracked. (1.1.14 (a) (ii))1
Riders seat insecure |6.2.5 |a| |ii||1
Front Exhaust system insecure (6.1.2 (a))1
Front Exhaust has a major leak of exhaust gases (6.1.2 (a))1
Front shock absorber seal failed and leaking oil both of them |2.3.3|1
Nearside Front Position lamp not working |4.2.1 |a||1
Headlamp aim not tested |4.1.2 |b||1
Exhaust silencer insecure |8.1.1 |b| |i||1
Steering headbearing in such a condition that steering control is adversely affected large central notch in head bearings |2.2.2 |f| |ii||1
Front Front wheel bearings are excessively rough |2.3.5b|1
Nearside Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|1
Headlamp aim so that beam "kick up" is not visible on the screen Dipped beam has no beam image dipped beam and main beam seam to be operating wrong light |1.6.B.1|1
Rear shock absorber has inadequate damping effect. |2.4.A.3b|1
Nearside Rear Upper Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|1
Steering movement excessively stiff with the wheel raised |2.2.1b|1
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a|1
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b|1
Horn control defective |1.7.2a|1
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))1
Rear Valve stem seriously damaged (5.2.3 (j))1
Brake excessively binding front brake |1.2.1 |f||1
Decelerometer brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))1
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i||1
Brake excessively binding front brake (1.2.1 (f))1
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c|1
Offside Rear Brake disc|s| is excessively distorted |3.2.A1m|1
Front Brake disc contaminated |1.1.14 |b||1
Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h|1
Handlebar grip insecure to handlebar (2.2.1 (d) (ii))1
Central Front Lower Shock absorber has a serious fluid leak BOTH FRONT FORK SEALS LEAKING AFFECTING FRONT DISC BRAKE OPERATION.CONTAMINATION. |5.3.2 |b||1
Handlebar grip insecure to handlebar L/H HANDLEBAR GRIP LOOSE . |2.2.1 |d| |ii||1
Front position lamp incorrect colour |1.1.2a|1
Rear Floor brake test indicates a binding brake |3.3.C2c|1
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4|1
Centre Front wheel bearings are excessively rough Bearings rough |2.3.5b|1
Front Position lamp not working (4.2.1 (a))1
Front wheel bearings are excessively rough |2.3.5b|1
Front Exhaust is leaking and excessively noisey |7.1.1b|1
Front Steering movement excessively rough with the wheel raised |2.2.1b|1
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h|1
Centre Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a|1
Centre Front Steering movement excessively `notchy` with the wheel raised |2.2.1b|1
Offside Front Exhaust is leaking and excessively noisey |7.1.1b|1
Offside Front Exhaust mounting missing |7.1.1c|1
Offside Front Brake disc fractured (1.1.14 (a) (ii))1
Front Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii))1
Rear Stop lamp switch with a delay in operation (4.3.2 (a) (ii))1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy