| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 5 |
| Drive chain excessively loose |6.1.7 |c| |i|| | 2 |
| Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 2 |
| Rear reflector missing (4.8.2 (a) (ii)) | 2 |
| Handlebar restricted in free movement from lock to lock (2.1.4 (c)) | 2 |
| Rear Shock absorber has negligible damping effect no damping |5.3.2 |b|| | 1 |
| Front Shock absorber has negligible damping effect no damping |5.3.2 |b|| | 1 |
| Rear Brake has no recorded effort at a wheel |1.2.1 |a| |ii|| | 1 |
| Rear Brake performance not tested |1.2.1 |g|| | 1 |
| Rear Drive chain sprocket excessively loose 1 bolt loose,
1 incorrect bolt,
1 bolt missing, (6.1.7 (c) (i)) | 1 |
| Rear Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
| Front Brake fluid contaminated |1.8 |a|| | 1 |
| Front Brake cylinder leaking sight glass contaminated broken |1.1.16 |b| |i|| | 1 |
| Front Brake fluid significantly below minimum mark due to sight glass |1.1.10 |d| |ii|| | 1 |
| Rear Brake fluid significantly below minimum mark |1.1.10 |d| |ii|| | 1 |
| Front Brake master cylinder leaking |1.1.10 |b| |ii|| | 1 |
| Front Brake lever is positioned so that the brake cannot be readily applied |1.1.2 |d|| | 1 |
| Front Handlebar fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 1 |
| Rear Brake excessively binding (1.2.1 (f)) | 1 |
| Rear Valve stem seriously damaged (5.2.3 (j)) | 1 |
| Rear Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
| Front Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
| Front Valve stem seriously damaged (5.2.3 (j)) | 1 |
| Rear Suspension component pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Headlamp light source and lamp not compatible (4.1.4 (c)) | 1 |
| Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a)) | 1 |
| Front Brake disc insecure (1.1.14 (a) (ii)) | 1 |
| Rear Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
| Rear Brake hose excessively twisted (1.1.12 (b) (ii)) | 1 |
| Roller brake test brake efficiency less than 27.5% overall (1.2.2 (a) (ii)) | 1 |
| Horn sound not in accordance with requirements not working when headlights are switched on (7.7 (c)) | 1 |
| Chain guard insecure (6.1.7 (i)) | 1 |
| Rear Position lamp not working (4.2.1 (a)) | 1 |
| Wheel alignment incorrect which adversely affects the handling (2.4 (a)) | 1 |
| Headlamp insecure (4.1.1 (c)) | 1 |
| Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
| Steering operation linkage fouling when handlebars turned from lock to lock (2.1.4 (a)) | 1 |
| Offside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
| Central Front Upper Steering operation fouling on the fuel tank or bodywork on full lock steering stop pad missing from frame enabling lock out |2.1.4 |b|| | 1 |
| Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
| Offside Front Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
| Rear Brake excessively binding |1.2.1 |f|| | 1 |
| Front Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
| Rear Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
| Wheel alignment incorrect which adversely affects the steering |2.4 |a|| | 1 |
| Rear Drive chain sprocket so worn it is likely to fail teeth (6.1.7 (c) (ii)) | 1 |
| Horn not working (7.7 (a) (ii)) | 1 |
| Front Motorcycle structure has a fracture which is likely to adversely affect braking or steering mudguard insecure (6.1.1 (a) (ii)) | 1 |
| Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
| Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
| Throttle operating incorrectly (6.2.7 (a) (i)) | 1 |
| Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Rear Suspension arm attachment bracket/mounting insecure Rear swingarm loose. (5.3.3 (a) (i)) | 1 |
| Drive chain excessively tight (6.1.7 (k) (i)) | 1 |
| Rear Brake component insecure (1.1.21 (c)) | 1 |
| Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Position lamp switch does not illuminate all position lamps with a single operation high beam flash switch not working |4.2.2 |a|| | 1 |
| Handlebar fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 1 |
| Rear Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
| Front Brake fluid reservoir fluid not visible (1.1.10 (d) (iii)) | 1 |