Most common failures | No# failures |
---|
Headlamp aim out of alignment | 19 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 11 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 11 |
Steering headbearing has excessive free play |2.2.2| | 7 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 7 |
Horn not working |1.7.3a| | 6 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 5 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 5 |
Riders seat insecure |6.2.1a| | 4 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 4 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
Registration plate issues | 3 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 3 |
Drive chain excessively tight |6.2.1d| | 3 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 3 |
Nearside Front Direction indicator not working |1.5.1c| | 3 |
Drive chain excessively loose |6.2.1d| | 3 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 3 |
Nearside Rear Direction indicator not working |1.5.1c| | 3 |
Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 2 |
Stop lamp not working |4.3.1 |a| |ii|| | 2 |
Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 2 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
Direction indicators not working |1.5.1c| | 2 |
Horn control not functioning. |1.7.2b| | 2 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Offside Rear Direction indicator insecure |1.5.3b| | 2 |
Nearside Front Direction indicators not working |1.5.1c| | 2 |
Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Nearside Rear Direction indicator insecure |1.5.3b| | 2 |
Rear reflector on motorcycle missing |1.4.1| | 2 |
Horn control defective |1.7.2a| | 2 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Offside Front Direction indicator not working |1.5.1c| | 2 |
Drive chain worn to excess |6.2.1e| | 2 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 2 |
Rear reflector on motorcycle obscured |1.4.1| | 2 |
Offside Lower Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 2 |
Nearside Lower Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 2 |
Offside Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
Front Steering headbearing has excessive free play |2.2.2| | 2 |
Exhaust has part of the system missing |7.1.1a| | 1 |
Nearside Handlebar handgrip not secure to handlebars. l/h lever/switch assy loose |2.1.1c| | 1 |
Rear Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking engine support bushes have excess movement |6.1.1c| | 1 |
Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
Steering headbearing in such a condition that steering control is adversely affected (2.2.2 (f) (ii)) | 1 |
Headlamp insecure |1.2.3b| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
Rear Brake has no recorded effort at a wheel |1.2.1 |a| |ii|| | 1 |
All direction indicators not working |4.4.1 |a| |ii|| | 1 |
Shock absorber has a serious fluid leak both front forks |5.3.2 |b|| | 1 |
Offside Front Position lamp missing |4.2.1 |a|| | 1 |
Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Motorcycle structure excessively damaged |6.1.1a| | 1 |
Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Offside Rear Footrest insecure |6.2.1a| | 1 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Front Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear suspension bush excessively deteriorated n/s swingarm pivot |2.4.A2a|i|| | 1 |
Steering linkage has excessive free play |2.2.2| | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen no beam pattern |1.6.B.1| | 1 |
Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Stop lamp remains on when the brake is released REAR CONTROL |1.3.1e| | 1 |
Fuel cap mounting flange/sealing method defective |7.2.2c| | 1 |
Front position lamp insecure |1.1.1c| | 1 |
Front Riders seat insecure |6.2.1a| | 1 |
Rear Seat insecure |6.2.1a| | 1 |
Nearside Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Centre Rear reflector on motorcycle missing |1.4.1| | 1 |
Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Rear wheel has a loose wheel nut|s| |4.2.3a| | 1 |
Front mudguard can easily contact the wheel |2.3.7| | 1 |
Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking engine loose |6.1.1c| | 1 |
Nearside Front Direction indicator incorrect colour |1.5.1b| | 1 |
Offside Front Direction indicator incorrect colour |1.5.1b| | 1 |
Front position lamp missing |1.1.1a| | 1 |
Nearside Rear Footrest missing |6.2.1a| | 1 |
Offside Rear Footrest missing |6.2.1a| | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Front Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Rear Brake pedal is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Nearside Headlamp aim beam image kick up to the offside |1.6| | 1 |
Centre Front Lower Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Nearside Rear Brake lever pivots excessively worn |3.1.3a| | 1 |
Nearside Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Drive chain so worn it is likely to fail |6.1.7 |c| |ii|| | 1 |
Drive chain sprocket so worn it is likely to fail |6.1.7 |c| |ii|| | 1 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Nearside Rear Upper Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Centre Front Steering headbearing has excessive free play |2.2.2| | 1 |
Centre Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Nearside Rear Lower Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Nearside Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Nearside Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Stop lamp does not emit a steady light |1.3.1b| | 1 |
Indicator switch insecure |1.5.4| | 1 |
Suspension component pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
Offside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Engine mounting/bracket excessively loose |6.1.8 |a| |ii|| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.4 |a|| | 1 |
Front Lower Front wheel bearings have excessive free play |2.3.5b| | 1 |
Headlamp switch faulty |1.2.4| | 1 |
Rear Lower Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Brake performance not tested |3.3| | 1 |
Headlamp aim not tested |1.6| | 1 |
Offside Headlamp switch insecure |1.2.4| | 1 |
Front Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Headlamp deteriorated and function impaired |1.2.3a| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Rear Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Nearside Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Front Brake caliper|s| insecure |3.2.A1j| | 1 |
Exhaust is leaking and excessively noisey blowing |7.1.1b| | 1 |
Rear Brake cable badly frayed |3.2.A1b| | 1 |
Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Headlamp aim not tested (4.1.2 (b)) | 1 |
Brake reaction bracket securing bolt|s| missing split pin missing |3.2.A1j| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Offside Front Brake lever insecure |3.1.2a| | 1 |
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Front Valve stem seriously damaged |5.2.3 |j|| | 1 |
Rear Brake pedal has insufficient reserve travel |1.1.2 |a|| | 1 |
Rear Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
Rear Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Front Valve stem seriously damaged (5.2.3 (j)) | 1 |
Rear Valve stem seriously damaged (5.2.3 (j)) | 1 |
Chain guard insecure |6.2.1c| | 1 |
Rear suspension has corrosion which reduces the strength of a load bearing member or its supporting structure. |2.4.A.2d| | 1 |
Rear suspension component excessively corroded. |2.4.A.1a| | 1 |
Handlebar deformed |2.1.1b| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Front Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Front Brake master cylinder leaking (1.1.10 (b) (ii)) | 1 |
Suspension arm pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
Front Brake locking device insecure lever pivot nut |3.2.A1e| | 1 |
Nearside Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Nearside Upper Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Front suspension assembly component excessively bent |2.3.1| | 1 |
Front Lower Front suspension assembly component loose |2.3.1| | 1 |
Steering operation restricted in free movement from lock to lock (2.1.4 (c)) | 1 |
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
Front position lamp deteriorated and function impaired |1.1.1b| | 1 |
Brake locking device missing |3.2.A1e| | 1 |
Rear Brake locking device insecure |3.2.A1e| | 1 |
Rear suspension bush excessively deteriorated swinging arm |2.4.A2a|i|| | 1 |
Brake lever mounting insecure |3.1.2a| | 1 |
Headlamp switch insecure |1.2.4| | 1 |
Offside Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Front Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Nearside Rear Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Rear Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Front suspension assembly component excessively misaligned |2.3.1| | 1 |
Nearside Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Offside Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Fuel system component leaking (6.1.3 (b) (i)) | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Front Direction indicator not working |1.5.1c| | 1 |
Rear Direction indicator not working |1.5.1c| | 1 |
Front Brake component is excessively corroded |3.1.5| | 1 |
Rear Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Rear Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |