| Most common failures | No# failures |
|---|
| Brake pipe excessively corroded | 31 |
| Brake hose excessively deteriorated | 24 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 24 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 24 |
| Registration plate lamp issues | 20 |
| Windscreen wiper does not clear the windscreen effectively | 19 |
| Headlamp aim out of alignment | 14 |
| Offside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 12 |
| Nearside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 11 |
| Parking brake lever has no reserve travel |3.1.6b| | 11 |
| Offside Front Body has a sharp edge caused by corrosion |6.1.C.1| | 11 |
| Nearside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 11 |
| Exhaust has a major leak of exhaust gases |7.1.2| | 10 |
| Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 10 |
| Nearside Front constant velocity joint gaiter split |2.5.C.1a| | 8 |
| Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 8 |
| Front Exhaust has a major leak of exhaust gases |7.1.2| | 8 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 8 |
| Registration plate issues | 7 |
| Parking brake: efficiency below requirements |3.7.B.7| | 7 |
| Nearside Front Body has a sharp edge caused by corrosion |6.1.C.1| | 7 |
| Offside Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 7 |
| Rear Exhaust has a major leak of exhaust gases |7.1.2| | 6 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 6 |
| Brakes imbalanced across an axle | 6 |
| Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 6 |
| Nearside Rear Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 5 |
| Offside Rear fog lamp not working |1.3.2b| | 5 |
| Offside Front constant velocity joint gaiter split |2.5.C.1a| | 5 |
| Nearside Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 5 |
| Offside Front position lamp|s| not working |1.1.A.3b| | 4 |
| Nearside Outer Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 4 |
| Rear fog lamp not working |1.3.2b| | 4 |
| Nearside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 4 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 4 |
| Nearside Rear Stop lamp not working |1.2.1b| | 4 |
| Nearside Stop lamp not working |1.2.1b| | 4 |
| Nearside Rear Shock absorber has a serious fluid leak |2.7.3| | 3 |
| Offside Rear Shock absorber has a serious fluid leak |2.7.3| | 3 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
| Brake hose damaged | 3 |
| Brake pedal anti-slip provision missing |3.3.A.1b| | 3 |
| Nearside Front Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
| Offside Front Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
| Offside Rear Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
| Offside Rear Shock absorber has negligible damping effect |2.7.5| | 3 |
| Offside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 3 |
| Nearside Windscreen wiper blade deteriorated |8.2.2| | 3 |
| Nearside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
| Nearside front parking brake recording little or no effort |3.7.B.6a| | 3 |
| Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
| Exhaust system not adequately supported |7.1.1| | 3 |
| Offside Windscreen wiper blade deteriorated |8.2.2| | 3 |
| Nearside Outer Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
| Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 3 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 3 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 3 |
| Offside Rear position lamp|s| incorrect colour |1.1.A.3e| | 3 |
| Offside Front Suspension arm has excessive play in a ball joint |2.4.G.2| | 2 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 2 |
| Front front parking brake recording little or no effort |3.7.B.6a| | 2 |
| Exhaust tailpipe not capable of allowing the emission probe to be inserted |7.3.B.1| | 2 |
| Rear Exhaust has part of the system excessively deteriorated |7.1.1a| | 2 |
| Steering system has excessive free play detected at the steering wheel |steering rack fitted| |2.2.A.1b| | 2 |
| Nearside Front Front wheel bearing rough when rotated |2.5.A.2| | 2 |
| Offside Rear Direction indicator incomplete |1.5.A1b| | 2 |
| Offside Front Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i)) | 2 |
| Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 2 |
| Offside Headlamp not working on dipped beam |1.7.5a| | 2 |
| Offside Front Lower Body has a sharp edge caused by corrosion |6.1.C.1| | 2 |
| Nearside Front Lower Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 2 |
| Offside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 2 |
| Nearside Front Lower Ball joint has excessive play |2.2.B.1f| | 2 |
| Rear brake application uneven | 2 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Horn not working |1.6.2a| | 2 |
| Nearside Rear Shock absorber has negligible damping effect |2.7.5| | 2 |
| Offside Rear wheel bearing rough when rotated |2.6.1| | 2 |
| Offside Front Lower Suspension arm has excessive play in a ball joint |2.4.G.2| | 2 |
| Nearside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 2 |
| Offside Front Side repeater not working |1.4.A.2c| | 2 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Offside Front Lower Ball joint has excessive play |2.2.B.1f| | 2 |
| Offside Front Direction indicator not working |1.4.A.2c| | 2 |
| Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition |7.1.4| | 2 |
| Offside Outer Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
| Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
| Nearside Front Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 2 |
| Rear Rear fog lamp not working |1.3.2b| | 2 |
| Nearside Front position lamp|s| not working |1.1.A.3b| | 2 |
| Nearside Front Lower Suspension arm has excessive play in a ball joint |2.4.G.2| | 2 |
| Nearside Inner Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Nearside Outer Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Offside Rear wheel bearing has excessive play |2.6.2| | 2 |
| Centre Exhaust system not adequately supported |7.1.1| | 2 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
| Offside Front All position lamps not working |1.1.A.3b| | 2 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Nearside Rear Rear wheel bearing rough when rotated |2.6.1| | 2 |
| Offside Front Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Offside Front Upper Bonded suspension unit bonding failed and part of unit is likely to become displaced |2.4.F.2| | 1 |
| Offside Rear Rear wheel bearing rough when rotated |2.6.1| | 1 |
| Brake pedal spongy |3.3.B.1b| | 1 |
| Body has a sharp edge caused by damage |6.1.C.1| | 1 |
| Nearside Rear wheel bearing rough when rotated |2.6.1| | 1 |
| Offside rear brake recording little or no effort |3.7.B.5a| | 1 |
| Offside Front Front wheel bearing has excessive play |2.5.A.3c| | 1 |
| Inner Front Brake pedal spongy |3.3.B.1b| | 1 |
| Offside Front Steering rack damaged and unserviceable |2.2.C.1d| | 1 |
| Inner Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Inner Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Brake performance not tested |3.7.A.1| | 1 |
| Service brake: efficiency below requirements |3.7.C.1a| | 1 |
| Parking brake: efficiency below requirements |3.7.C.1b| | 1 |
| Front brake disc in such a condition that it is seriously weakened | 1 |
| Horn not loud enough to be heard by another road user |1.6.2b| | 1 |
| Centre Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
| Offside Front brake caliper has restricted free movement |3.5.1k| | 1 |
| Offside Front front parking brake recording little or no effort |3.7.B.6a| | 1 |
| Offside Rear Rear position lamp|s| incomplete |1.1.4a| | 1 |
| Nearside Front Body insecure and dangerous to other road users |6.1.B.1b| | 1 |
| Offside Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |
| Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 1 |
| Exhaust has a major leak of exhaust gases rear box (6.1.2 (a)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i)) | 1 |
| Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 1 |
| Offside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 1 |
| Offside Front Service brake excessively binding (1.2.1 (f)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill (7.1.1 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i)) | 1 |
| Exhaust emissions hydrocarbon content excessive |7.3.B.1b| | 1 |
| Offside Front Anti-roll bar pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
| Nearside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill |7.1.1 |a| |i|| | 1 |
| Offside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill |7.1.1 |a| |i|| | 1 |
| Offside Rear fog lamp not working |4.5.1 |a| |ii|| | 1 |
| Exhaust emissions carbon monoxide content excessive |8.2.1.2 |b|| | 1 |
| Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt |6.1.7 |g| |ii|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength at anti roll bar mount |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength at axle mount |5.3.6 |a| |i|| | 1 |
| Offside Headlamp not working on main beam |1.7.5a| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded next to anti roll bar mounting |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded at sill |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded at sill |2.4.A.3| | 1 |
| All position lamps not working |1.1.A.3b| | 1 |
| Nearside Front Lower Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 1 |
| Offside Front Lower Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 1 |
| Offside Front Front position lamp|s| has less than 50% of the light sources illuminating |1.1.A.3b| | 1 |
| Offside Rear Lower Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
| Nearside Front Lower Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
| Nearside Outer Front Lower Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Inner Rear Lower Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Outer Rear Lower Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Inner Front Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
| Nearside Outer Front Front constant velocity joint is insecure |2.5.C.1b| | 1 |
| Offside Outer Front Front constant velocity joint is insecure |2.5.C.1b| | 1 |
| Centre Rear Lower Vehicle structure excessively corroded within 30cm of towbar mounting |6.6.6| | 1 |
| Nearside Front Upper Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Front Direction indicator incorrect colour |1.4.A.2f| | 1 |
| Offside Rear Direction indicator incorrect colour |1.4.A.2f| | 1 |
| Nearside Outer Front Lower Body has a projection caused by corrosion |6.1.C.1| | 1 |
| Nearside Front Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Front Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
| Offside Rear Fuel hose leaking |7.2.3| | 1 |
| Offside Front Front position lamp|s| not working |1.1.A.3b| | 1 |
| Offside Front Lower Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
| Nearside Rear Lower Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Nearside Rear brake caliper leaking |3.6.A.1| | 1 |
| Nearside Rear Lower Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
| Centre Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired sill inner and outer |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired sill inner and outer |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area is inadequately repaired sill |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area is inadequately repaired sill |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area is inadequately repaired chassis |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area is inadequately repaired chassis |5.3.6 |a| |i|| | 1 |
| Fuel tank leaking |7.2.3| | 1 |
| Nearside Steering rack gaiter split |2.2.D.2d| | 1 |
| Nearside Front drive shaft damaged |2.5.C.2a| | 1 |
| Offside Outer Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
| Nearside Outer Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
| Nearside Front brake disc excessively pitted |3.5.1h| | 1 |
| Offside Front brake disc excessively pitted |3.5.1h| | 1 |
| Offside Steering rack gaiter split |2.2.D.2d| | 1 |
| Upper Steering column universal joint has excessive play |2.1.5| | 1 |
| Nearside Front brake caliper leaking |3.6.A.1| | 1 |
| Offside Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
| Offside Front wheel bearing has excessive play |2.5.A.3c| | 1 |
| Rear Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside rear brake recording little or no effort |3.7.B.5a| | 1 |
| Battery insecure |1.9.1| | 1 |
| Offside Inner Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Rear Drive shaft uj which forms part of the suspension has excessive play in a universal joint |2.4.G.4b| | 1 |
| Front Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
| Nearside Front front brake recording little or no effort |3.7.B.5a| | 1 |
| Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3| | 1 |
| Offside Outer Seat belt anchorage prescribed area is excessively corroded sill |5.2.6| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded chassis and floor |2.4.A.3| | 1 |
| Nearside front brake binding |3.7.B.1| | 1 |
| Offside Front Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 1 |
| Offside Rear Upper Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Both front suspension tops (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Both rear chassis (5.3.6 (a) (i)) | 1 |
| Brake master cylinder/servo mounting prescribed area is excessively corroded and functionality of the braking system is affected (1.1.21 (e) (ii)) | 1 |
| Brake hose damaged and likely to fail Both rear (1.1.12 (a)) | 1 |
| Offside Rear Service brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 1 |
| Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced Sill/floor (7.1.1 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis (5.3.6 (a) (i)) | 1 |
| Brake master cylinder/servo mounting prescribed area is excessively corroded |3.6.C.3| | 1 |
| Offside Front Front suspension has excessive play in a upper suspension ball joint |2.5.B.1a| | 1 |
| Nearside Front Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 1 |
| Nearside Rear Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
| Offside Rear Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
| Nearside Front wheel bearing has excessive play |2.5.A.3c| | 1 |
| Driver`s door cannot be opened from outside the vehicle |6.2.B.1b| | 1 |
| Nearside Front Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Nearside Front Ball joint has excessive play |2.2.B.1f| | 1 |
| Offside Front Drive shaft bearing likely to break up (6.1.7 (b) (ii)) | 1 |
| Nearside Front Outer Drive shaft bearing excessively worn (6.1.7 (b) (i)) | 1 |
| Offside Front Front constant velocity joint is excessively worn |2.5.C.1b| | 1 |
| Front Tie bar/rod has excessive play in a pin/bush |2.4.G.2| | 1 |
| Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 1 |
| Mechanical brake component has restricted free movement | 1 |
| Rear wheel bearing rough when rotated |2.6.1| | 1 |
| Direction indicator excessively deteriorated so that it is not visible from a reasonable distance |1.4.A.2e| | 1 |
| Rear position lamp|s| excessively damaged so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
| Nearside Inner Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Inner Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Emissions not tested |7.0| | 1 |
| Offside Outer Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Front wheel bearing rough when rotated |2.5.A.2| | 1 |
| Offside Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
| Nearside Rear Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
| Centre Front Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
| Centre Rear Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 1 |
| Nearside Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Offside Front Lower Macpherson strut ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 1 |
| Nearside Front Lower Macpherson strut ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 1 |
| Nearside Front Lower Macpherson strut ball joint excessively worn |5.3.4 |a| |i|| | 1 |
| Nearside Rear Inner Drive shaft securing bolt missing retaining pin missing |6.1.7 |a| |i|| | 1 |
| Rear fog lamp tell tale not working |1.3.1b| | 1 |
| Offside Front Track rod end loose |2.2.B.1d| | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
| Nearside Rear rear brake recording little or no effort |3.7.B.5a| | 1 |
| Offside Front Suspension arm ball joint dust cover insecure so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Offside Rear Rear position lamp|s| incorrect colour |1.1.A.3e| | 1 |
| Offside Inner Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Fuel pipe leaking |7.2.3| | 1 |
| Offside Front Seat belt has a cut which has significantly weakened the webbing |5.2.2a| | 1 |
| Brake fluid contaminated |1.8 |a|| | 1 |
| Nearside Rear Sub-frame attachment rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Rear Sub-frame attachment rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Rear Exhaust has a major leak of exhaust gases emissions not tested |7.1.2| | 1 |
| Offside Rear Sub-frame attachment bracket/mounting corroded and its strength is seriously reduced |2.4.G.1| | 1 |
| Centre Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Exhaust has a part missing |7.1.1a| | 1 |
| Offside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
| Offside Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Front Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Front Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Front position lamp|s| insecure |1.1.A.3a| | 1 |
| Nearside Inner Front constant velocity joint is excessively worn |2.5.C.1b| | 1 |
| Offside Rear Stop lamp not working |1.2.1b| | 1 |
| Brake pedal anti-slip provision loose |3.3.A.1b| | 1 |
| Nearside Front Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
| Nearside Inner Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Offside Inner Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Offside front parking brake recording little or no effort |3.7.B.6a| | 1 |
| Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 1 |
| Nearside Rear Sub-frame rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Rear Sub-frame rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Steering system has excessive free play detected at the steering wheel |steering rack fitted| |2.2.A.1b| | 1 |
| Nearside Rear Direction indicator not working |1.4.A.2c| | 1 |
| Nearside Front Body has a sharp edge caused by corrosion wing |6.1.C.1| | 1 |
| Offside Front Body has a sharp edge caused by corrosion wing |6.1.C.1| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded under bonnet |2.4.A.3| | 1 |
| Offside Body insecure and dangerous to other road users front bumper |6.1.B.1b| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded under door sill |2.4.A.3| | 1 |
| Offside Inner Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Rear Rear position lamp|s| excessively damaged so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
| Offside Front Front suspension retaining device ineffective |2.5.A.4| | 1 |
| Offside Inner Front Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Tailgate cannot be secured in the closed position |6.4.1| | 1 |
| Offside Front Driver`s seat insecure |6.2.A.1| | 1 |
| Nearside Front Lower Suspension arm ball joint dust cover missing |2.4.G.2| | 1 |
| Rear Exhaust system not adequately supported |7.1.1| | 1 |
| Centre Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Rear All position lamps not working |1.1.A.3b| | 1 |
| Nearside Front position lamp|s| excessively damaged so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
| Offside Stop lamp not working |1.2.1b| | 1 |
| Nearside Front Direction indicators not working |1.4.A.2c| | 1 |
| Nearside Front Direction indicator incomplete |1.5.A1b| | 1 |
| Offside Outer Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Parking brake is not capable of being maintained in operation by direct mechanical action only |3.1.2| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Nearside rear brake grabbing severely |3.7.A.5b| | 1 |
| Rear Exhaust has a part missing |7.1.1a| | 1 |
| Nearside Front Body has a sharp edge caused by damage |6.1.C.1| | 1 |
| Offside Rear Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
| Offside Front Direction indicator incorrect colour |1.4.A.2f| | 1 |
| Nearside Front passenger seat insecure |6.2.3| | 1 |
| Offside Rear Brake pipe connection leaking on a hydraulic braking system (1.1.11 (b) (ii)) | 1 |
| Nearside Rear Position lamp not working |4.2.1 |a|| | 1 |
| Nearside Stop lamp|s| all not working |4.3.1 |a| |iii|| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Front Headlamp not working on dipped beam |1.7.5a| | 1 |
| Offside Front Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
| Nearside Headlamp not working on dipped beam |1.7.5a| | 1 |