| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 34 |
| Brake pipe excessively corroded | 34 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 32 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 31 |
| Brake hose excessively deteriorated | 18 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 18 |
| Windscreen wiper does not clear the windscreen effectively | 17 |
| Rear Exhaust has a major leak of exhaust gases |7.1.2| | 12 |
| Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 10 |
| Registration plate issues | 10 |
| Offside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 10 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 10 |
| Nearside Front Front constant velocity joint gaiter split |2.5.C.1a| | 9 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 9 |
| Nearside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 9 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 7 |
| Nearside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 7 |
| Offside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 6 |
| Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 6 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 5 |
| Nearside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 5 |
| Exhaust has a major leak of exhaust gases |7.1.2| | 4 |
| Offside Inner Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 4 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 4 |
| Front Exhaust has a major leak of exhaust gases |7.1.2| | 4 |
| Offside Front Body has a sharp edge caused by corrosion |6.1.C.1| | 4 |
| Horn not working |1.6.2a| | 4 |
| Windscreen wiper blade insecure | 4 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 4 |
| Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement |7.2.4b| | 4 |
| Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 4 |
| Offside Front Anti-roll bar attachment bracket/mounting insecure |2.4.G.1| | 4 |
| Offside Front constant velocity joint gaiter split |2.5.C.1a| | 4 |
| Brake hose damaged | 4 |
| Parking brake: efficiency below requirements |3.7.B.7| | 3 |
| Centre Exhaust has a major leak of exhaust gases |7.1.2| | 3 |
| Offside Front Front constant velocity joint gaiter split |2.5.C.1a| | 3 |
| Offside Rear fog lamp not working |1.3.2b| | 3 |
| Nearside Front Anti-roll bar attachment bracket/mounting insecure |2.4.G.1| | 3 |
| Offside Outer Front constant velocity joint gaiter split |2.5.C.1a| | 3 |
| Offside Rear Shock absorber has negligible damping effect |2.7.5| | 3 |
| Nearside Rear Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
| Offside Front Anti-roll bar attachment bracket/mounting fractured |2.4.G.1| | 3 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
| Front Exhaust system not adequately supported |7.1.1| | 3 |
| Rear brake binding | 3 |
| Offside Front Windscreen wiper blade deteriorated |8.2.2| | 3 |
| Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
| Nearside Outer Front constant velocity joint gaiter split |2.5.C.1a| | 3 |
| Driver`s seat insecure |6.2.A.1| | 3 |
| Nearside rear brake recording little or no effort |3.7.B.5a| | 2 |
| Offside Front Direction indicators not working |1.4.A.2c| | 2 |
| Service brake: efficiency below requirements |3.7.C.1a| | 2 |
| Nearside Inner Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Nearside Outer Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Nearside Front Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 2 |
| Nearside Headlamp not working on main beam |1.7.5a| | 2 |
| Offside Headlamp not working on main beam |1.7.5a| | 2 |
| Brakes imbalanced across an axle | 2 |
| Nearside Rear Braking system leaking |3.6.A.1| | 2 |
| Offside Rear Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Offside Front wheel bearing rough when rotated |2.5.A.2| | 2 |
| All position lamps adversely affected by the operation of another lamp |1.1.A.3f| | 2 |
| Nearside Front Direction indicator incorrect colour |1.4.A.2f| | 2 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 2 |
| Nearside Steering rack gaiter split |2.2.D.2d| | 2 |
| An item not tested |Manual| | 2 |
| Rear Exhaust has part of the system excessively deteriorated |7.1.1a| | 2 |
| Nearside Headlamp not working on dipped beam |1.7.5a| | 2 |
| Service brake: efficiency below requirements |3.7.B.7| | 2 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
| Nearside Front Body has a sharp edge caused by corrosion |6.1.C.1| | 2 |
| Nearside Stop lamp not working |1.2.1b| | 2 |
| Nearside Front position lamp|s| not working |1.1.A.3b| | 2 |
| Registration plate lamp issues | 2 |
| Offside Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Offside Front Anti-roll bar attachment bracket/mounting cracked |2.4.G.1| | 2 |
| Offside Front position lamp|s| not working |1.1.A.3b| | 2 |
| Nearside Front Front wheel bearing has excessive play |2.5.A.3c| | 2 |
| Rear parking brake recording little or no effort | 2 |
| Offside Rear Bonded suspension unit deteriorated and cannot function as intended |2.4.F.3| | 2 |
| Parking brake lever has no reserve travel |3.1.6b| | 2 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Centre Front Exhaust has part of the system excessively deteriorated |7.1.1a| | 2 |
| Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b)) | 2 |
| Offside Front Upper Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Headlamp not in good working order |not working| |1.2.4a| | 1 |
| Offside Headlamp not in good working order |not working| |1.2.4a| | 1 |
| Brake hydraulic reservoir fluid level below minimum level |3.6.G.1b| | 1 |
| Rear Exhaust has a part missing |7.1.1a| | 1 |
| Nearside Front Body has a sharp edge caused by damage |6.1.C.1| | 1 |
| Nearside Front Steering system has a road wheel fouling a part of the vehicle |2.2.D.2a| | 1 |
| Offside Rear fog lamp insecure |1.3.2a| | 1 |
| Offside Inner Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Nearside Inner Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Nearside Rear Trailing arm rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Rear Trailing arm rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Rear Bonded suspension unit bonding failed and part of unit is likely to become displaced |2.4.F.2| | 1 |
| Offside Rear Bonded suspension unit bonding failed and part of unit is likely to become displaced |2.4.F.2| | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition |7.1.4| | 1 |
| Nearside Front Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
| Offside Front Brake pipe leaking |3.6.A.1| | 1 |
| Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 1 |
| Nearside Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
| Rear Exhaust system not adequately supported |7.1.1| | 1 |
| Offside Front Macpherson strut has excessive movement at the upper attachment |2.5.A.1c| | 1 |
| Front brake disc excessively pitted |3.5.1h| | 1 |
| Nearside Front brake disc has restricted free movement |3.5.1j| | 1 |
| Offside Rear brake disc has restricted free movement |3.5.1j| | 1 |
| Offside Rear Upper Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Nearside Front Anti-roll bar rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Front Anti-roll bar rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Front Brake hose leaking |3.6.A.1| | 1 |
| Nearside Rear Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement |7.2.4b| | 1 |
| Nearside Front Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 1 |
| Front brake disc in such a condition that it is seriously weakened | 1 |
| Dipswitch operation does not deflect all main beam headlamps to make them dipped beams |1.7.4b| | 1 |
| Nearside Outer Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Front Sub-frame attachment rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Front Sub-frame attachment rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Front front brake binding |3.7.B.1| | 1 |
| Nearside Front Upper Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Rear Upper Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Front Front wheel bearing has excessive play |2.5.A.3c| | 1 |
| Offside Inner Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Rear Braking system leaking |3.6.A.1| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
| Nearside Front Headlamp not in a clean condition affecting beam image |1.2.4a| | 1 |
| Offside Front Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Nearside Rear Upper Coil spring mounting corroded and seriously weakened |2.4.C.3c| | 1 |
| Offside Rear Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Offside Rear Upper Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Inner Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Nearside Front Sub-frame attachment bracket/mounting fractured |2.4.G.1| | 1 |
| Offside Front Sub-frame attachment bracket/mounting fractured |2.4.G.1| | 1 |
| Offside Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
| Offside Front front brake binding |3.7.B.1| | 1 |
| Upper Macpherson strut corroded and seriously weakened |2.4.G.1| | 1 |
| Offside Front position lamp|s| not in good working order |function impaired| |1.1.4a| | 1 |
| Offside Headlamp not working on dipped beam |1.7.5a| | 1 |
| Nearside Front coil spring fractured |2.4.C.1a| | 1 |
| Offside Headlamp insecure |1.7.3| | 1 |
| Nearside Front Macpherson strut has excessive movement at the upper attachment |2.5.A.1c| | 1 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
| Offside front brake binding |3.7.B.1| | 1 |
| Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
| Nearside Inner Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Outer Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Front Horn not working |1.6.2a| | 1 |
| Windscreen has damage | 1 |
| Trailing arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Rear Shock absorber has negligible damping effect |2.7.5| | 1 |
| Outer Front Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Front Direction indicator not working |1.4.A.2c| | 1 |
| Offside Rear wheel bearing has excessive play |2.6.2| | 1 |
| Offside Rear rear brake recording little or no effort |3.7.B.5a| | 1 |
| Front Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Inner Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Outer Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Rear fog lamp tell tale not working |1.3.1b| | 1 |
| Nearside Front Windscreen wiper blade deteriorated |8.2.2| | 1 |
| Offside Front Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 1 |
| Nearside Front Shock absorber has negligible damping effect |2.7.5| | 1 |
| Offside Front Shock absorber has negligible damping effect |2.7.5| | 1 |
| Fuel tank leaking |7.2.3| | 1 |
| Nearside Front Ball joint has excessive play |2.2.B.1f| | 1 |
| Offside Front Ball joint has excessive play |2.2.B.1f| | 1 |
| Nearside Inner Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
| Offside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Windscreen wiper blade deteriorated |8.2.2| | 1 |
| Offside Outer Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Nearside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Rear Shock absorber detached |2.7.2b| | 1 |
| Nearside Front Anti-roll bar fractured |2.4.G.1| | 1 |
| Nearside Front drive shaft coupling is excessively worn |2.5.C.1c| | 1 |
| Offside Front drive shaft coupling is excessively worn |2.5.C.1c| | 1 |
| Rear Seat belt locking mechanism does not secure or release |5.2.5a| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded outer sill area |5.2.6| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded outer sill area |5.2.6| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded floor to sill area |5.2.6| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded inner sill area |5.2.6| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded inner arch area |5.2.6| | 1 |
| Nearside Rear Subframe mounting prescribed area is excessively corroded back of wheel arch |2.4.A.3| | 1 |
| Battery insecure |1.9.1| | 1 |
| Rear fog lamp not working |1.3.2b| | 1 |
| Offside Headlamp excessively deteriorated so that the light output is severely reduced no pattern |1.7.5a| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill |2.4.A.3| | 1 |
| Offside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
| Nearside Front Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
| Rear Mechanical brake component has restricted free movement | 1 |
| Nearside Front Anti-roll bar attachment bracket/mounting cracked |2.4.G.1| | 1 |
| Nearside Inner Rear Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Front Anti-roll bar cracked |2.4.G.1| | 1 |
| Offside Front Anti-roll bar cracked |2.4.G.1| | 1 |
| Shock absorber has an excessively worn bush |2.7.4| | 1 |
| Nearside Rear Trailing arm has excessive play in a pin/bush |2.4.G.2| | 1 |
| Offside Rear Trailing arm has excessive play in a pin/bush |2.4.G.2| | 1 |
| Offside Side repeater not working |1.4.A.2c| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Rear Lower Trailing arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is fractured |2.4.A.3| | 1 |
| Nearside Inner Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Outer Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Front Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
| Nearside Front Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
| Nearside Rear position lamp|s| insecure |1.1.A.3a| | 1 |
| Nearside Rear Direction indicator not working |1.4.A.2c| | 1 |
| Nearside Rear Bonded suspension unit deteriorated and cannot function as intended |2.4.F.3| | 1 |
| Offside Front brake disc excessively pitted |3.5.1h| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Rear Rear fog lamp insecure |1.3.2a| | 1 |
| Nearside Windscreen wiper blade missing |8.2.2| | 1 |
| Nearside Front Valve stem seriously misaligned |4.1.D.1e| | 1 |
| Nearside Rear Valve stem seriously misaligned |4.1.D.1e| | 1 |
| Nearside Front Anti-roll bar linkage fractured |2.4.G.1| | 1 |
| Offside Rear Shock absorber has a serious fluid leak |2.7.3| | 1 |
| Offside Front Seat belt locking mechanism does not secure or release |5.2.5a| | 1 |
| Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Front Exhaust mounting missing |7.1.1b| | 1 |
| Offside Front Tie bar/rod attachment bracket/mounting bolt missing |2.4.G.1| | 1 |
| Front Body insecure and dangerous to other road users |6.1.B.1b| | 1 |
| Offside Front Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 1 |
| Offside Rear Direction indicator incomplete |1.5.A1b| | 1 |
| Offside Outer Front Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 1 |
| Nearside Outer Front Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 1 |
| Nearside Rear Trailing arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Rear Trailing arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Front Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Headlamp excessively damaged so that the light output is severely reduced |1.7.5a| | 1 |
| Nearside Front Suspension arm locating pin insecure |2.4.G.3a| | 1 |
| Nearside Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Ball joint ball pin shank loose |2.2.B.1c| | 1 |
| Offside Front Upper Brake pipe seriously damaged |found during steering lock to lock check| |2.2.D.2b| | 1 |
| Offside Rear Rear wheel bearing has excessive play |2.6.2| | 1 |
| Offside Rear Stop lamp not working |1.2.1b| | 1 |
| Hazard warning tell tale not working correctly |1.4.B.1e| | 1 |
| Offside Inner Front Anti-roll bar attachment bracket/mounting cracked |2.4.G.1| | 1 |
| Nearside Outer Front Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
| Nearside Outer Front Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Outer Front Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Inner Front Anti-roll bar attachment bracket/mounting corroded and its strength is seriously reduced |2.4.G.1| | 1 |
| Offside Inner Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Outer Rear Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Outer Rear Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Inner Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Inner Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is inadequately repaired |5.2.6| | 1 |
| Offside Rear Seat belt anchorage prescribed area is inadequately repaired |5.2.6| | 1 |
| Offside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
| Nearside Front Body insecure and dangerous to other road users |6.1.B.1b| | 1 |
| Offside Rear Rear fog lamp not working |1.3.2b| | 1 |
| Nearside Steering rack gaiter insecure |2.2.D.2d| | 1 |
| Nearside Front Direction indicator incomplete |1.5.A1b| | 1 |
| Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Rear brake application uneven | 1 |
| Fuel cap/sealing device sealing washer missing |7.2.4c| | 1 |
| Nearside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
| Offside Rear Shock absorber casing corroded externally so the unit does not function |2.7.2a| | 1 |
| Brake performance not tested |3.7.A.1| | 1 |
| Nearside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
| Battery insecure and likely to fall from carrier (4.13 (a) (ii)) | 1 |
| Nearside Windscreen wiper blade missing (3.4 (b) (ii)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Offside Front Service brake excessively binding (1.2.1 (f)) | 1 |
| Exhaust emissions - engine idle speed too high (8.2.1.2 (e)) | 1 |