Most common failures | No# failures |
---|
Registration plate lamp issues | 12 |
Windscreen wiper does not clear the windscreen effectively | 9 |
Headlamp aim out of alignment | 6 |
Exhaust emissions carbon monoxide content after 2nd fast idle excessive |7.3.D.3| | 4 |
Brake pipe excessively corroded | 3 |
Exhaust emissions hydrocarbon content after 2nd fast idle excessive |7.3.D.3| | 3 |
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits |7.3.D.3| | 3 |
Front brake disc in such a condition that it is seriously weakened | 3 |
Rear Rear fog lamp not working |1.3.2b| | 2 |
Windscreen has damage | 2 |
Offside Front Front position lamp|s| not working |1.1.A.3b| | 2 |
Emissions not tested (8.2.1.2 (d)) | 2 |
Offside Stop lamp not working |1.2.1b| | 2 |
Exhaust catalytic converter missing where one was fitted as standard (8.2.1.1 (a)) | 2 |
Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h)) | 2 |
Brakes imbalanced across an axle | 2 |
Rear brake binding | 2 |
Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
Nearside Front position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
Front Electrical wiring insecure |1.9.2a| | 1 |
Offside Lower Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Front Sub-frame corroded and seriously weakened |2.4.G.1| | 1 |
Offside Rear Anti-roll bar linkage has excessive play in a ball joint |2.4.G.2| | 1 |
Nearside Rear Sub-frame corroded and seriously weakened as marked. |2.4.G.1| | 1 |
Offside Rear Brake pipe leaking |3.6.A.1| | 1 |
Nearside Rear Suspension component mounting prescribed area is inadequately repaired inner sill trailing arm mounting area repaired with filler |2.4.A.3| | 1 |
Exhaust emissions carbon monoxide content at idle excessive |7.3.D.4| | 1 |
Nearside Rear Suspension arm has excessive play in a pin/bush |2.4.G.2| | 1 |
Offside Rear Suspension arm has excessive play in a pin/bush |2.4.G.2| | 1 |
Front Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 1 |
Front Anti-roll bar rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
Nearside Rear Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 1 |
Nearside Front Sub-frame corroded and seriously weakened |2.4.G.1| | 1 |
Nearside Front Position lamp not working (4.2.1 (a) (ii)) | 1 |
Offside Front Position lamp not working (4.2.1 (a) (ii)) | 1 |
Offside Rear Shock absorbers has a serious fluid leak | 1 |
Nearside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 1 |
Nearside Rear Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
Offside Rear Anti-roll bar linkage pin or bush likely to become detached (5.3.4 (a) (ii)) | 1 |
Nearside Front Road wheel fixing missing (5.2.1 (a) (i)) | 1 |
Nearside Rear Road wheel fixing missing (5.2.1 (a) (i)) | 1 |
Nearside Front Road wheel fixings not compatible stud snapped (5.2.2 (d)) | 1 |
Offside Rear Road wheel fixing missing (5.2.1 (a) (i)) | 1 |
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill area (5.3.6 (a) (i)) | 1 |
Rear brake disc in such a condition that it is seriously weakened | 1 |
Rear Service brake effort inadequate at a wheel both sides (1.2.1 (a) (i)) | 1 |
Service brake efficiency below requirements (1.2.2 (a) (i)) | 1 |
Sub-frame corroded and seriously weakened (5.3.3 (b) (i)) | 1 |
Nearside Rear Seat belt cut sufficient to obstruct correct operation of the belt |5.2.2a| | 1 |
Centre Rear Statutory seat belt missing |5.1.1| | 1 |
Brake hose damaged | 1 |
Brake hose has insufficient room to move | 1 |
Offside Rear Rear position lamp|s| incorrect colour broken |1.1.A.3e| | 1 |
Central Front Exhaust has a major leak of exhaust gases behind cat (6.1.2 (a)) | 1 |
Offside Front position lamp|s| not working |1.1.A.3b| | 1 |
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 1 |
Nearside Front Integral body structure is deformed and structural rigidity is significantly reduced inner sill rusty and holed |6.1.1 |a| |i|| | 1 |
Nearside Rear Outer Sub-frame strengthening plate or fastening so insecure that structural rigidity is seriously reduced bushes and bolts |6.1.1 |b| |ii|| | 1 |
Nearside Rear Sub-frame corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i|| | 1 |
Offside Rear Sub-frame corroded to the extent that the rigidity of the assembly is significantly reduced bushes and bolts |6.1.1 |c| |i|| | 1 |
Offside Rear Sub-frame strengthening plate or fastening so insecure that structural rigidity is seriously reduced |6.1.1 |b| |ii|| | 1 |
Nearside Front Outer Anti-roll bar linkage pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
Offside Front Outer Anti-roll bar linkage pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
Brake prescribed area is excessively corroded and functionality of the braking system is affected brake hose mount corroded and insecure |1.1.21 |e| |ii|| | 1 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 1 |
All position lamps not working unable to operate with ignition off |1.1.A.3b| | 1 |
Offside Front Lower Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
Nearside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
Parking brake: efficiency below requirements |3.7.C.1b| | 1 |
Nearside Rear wheel bearing rough when rotated |2.6.1| | 1 |
Battery insecure |1.9.1| | 1 |
Nearside Headlamp not in good working order |not working| |1.2.4a| | 1 |
Offside Headlamp not in good working order |not working| |1.2.4a| | 1 |
Offside Front coil spring broken |2.4.C.1a| | 1 |
Offside Front Suspension arm corroded and seriously weakened |2.4.G.1| | 1 |
Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
Front All position lamps not working |1.1.A.3b| | 1 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill |5.3.6 |a| |i|| | 1 |
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill |5.3.6 |a| |i|| | 1 |
Offside Rear Service brake excessively binding |1.2.1 |f|| | 1 |
Offside Rear Sub-frame corroded and seriously weakened |2.4.G.1| | 1 |
Offside Inner Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Headlamp aim projected beam image is obviously incorrect both front light lenses misted (4.1.2 (c)) | 1 |
Nearside Rear Anti-roll bar linkage damaged and seriously weakened droplink bushs deteriorated (5.3.3 (b) (i)) | 1 |
Offside Rear Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill holed (7.1.1 (a) (i)) | 1 |
Front Front position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
Nearside Inner Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Brake pedal anti-slip provision worn smooth |1.1.2 |c|| | 1 |