| Most common failures | No# failures |
|---|
| Brake pipe excessively corroded | 46 |
| Headlamp aim out of alignment | 40 |
| Windscreen wiper does not clear the windscreen effectively | 39 |
| Registration plate lamp issues | 33 |
| Brake hose excessively deteriorated | 32 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 22 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 22 |
| Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 21 |
| Registration plate issues | 18 |
| Rear Exhaust has a major leak of exhaust gases |7.1.2| | 17 |
| Centre Exhaust has a major leak of exhaust gases |7.1.2| | 10 |
| Nearside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 10 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 9 |
| Front Exhaust has a major leak of exhaust gases |7.1.2| | 9 |
| Offside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 8 |
| Exhaust emissions Lambda reading after 2nd fast idle outside specified limits |7.3.D.3| | 7 |
| Rear fog lamp not working |1.3.2b| | 6 |
| Brakes imbalanced across an axle | 6 |
| Nearside Front Lower Suspension arm has excessive play in a ball joint |2.4.G.2| | 6 |
| Parking brake: efficiency below requirements |3.7.B.7| | 5 |
| Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 5 |
| Exhaust has a major leak of exhaust gases |7.1.2| | 5 |
| Emissions not tested |7.0| | 5 |
| Offside Front Suspension arm has excessive play in a ball joint |2.4.G.2| | 5 |
| Nearside Stop lamp not working |1.2.1b| | 5 |
| Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b)) | 4 |
| Rear parking brake recording little or no effort | 4 |
| Nearside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 4 |
| Service brake: efficiency below requirements |3.7.B.7| | 4 |
| Offside Front Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 4 |
| Nearside Steering rack gaiter split |2.2.D.2d| | 4 |
| Rear brake application uneven | 4 |
| Exhaust emissions carbon monoxide content after 2nd fast idle excessive |7.3.D.3| | 4 |
| Offside Front position lamp|s| not working |1.1.A.3b| | 4 |
| Offside Stop lamp not working |1.2.1b| | 4 |
| Brake pedal anti-slip provision missing |3.3.A.1b| | 4 |
| Offside Rear fog lamp not working |1.3.2b| | 4 |
| Offside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 4 |
| Offside Front wheel bearing rough when rotated |2.5.A.2| | 4 |
| Nearside Front position lamp|s| not working |1.1.A.3b| | 4 |
| Nearside Front constant velocity joint gaiter split |2.5.C.1a| | 4 |
| Nearside Front wheel bearing has excessive play |2.5.A.3c| | 3 |
| Front brake disc in such a condition that it is seriously weakened | 3 |
| Nearside Front Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 3 |
| Nearside Front Front position lamp|s| not working |1.1.A.3b| | 3 |
| Offside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 3 |
| Offside Front Steering rack gaiter split |2.2.D.2d| | 3 |
| Nearside Front Front wheel bearing has excessive play |2.5.A.3c| | 3 |
| Brake hose damaged | 3 |
| Offside Outer Front Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 3 |
| Nearside Outer Front Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 3 |
| Offside Front constant velocity joint gaiter split |2.5.C.1a| | 3 |
| Exhaust emissions hydrocarbon content after 2nd fast idle excessive |7.3.D.3| | 3 |
| Nearside Front Body has a sharp edge caused by corrosion |6.1.C.1| | 3 |
| Rear fog lamp not working (4.5.1 (a) (ii)) | 3 |
| Rear Exhaust has part of the system excessively deteriorated |7.1.1a| | 3 |
| Exhaust emissions carbon monoxide content at idle excessive |7.3.D.4| | 3 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 3 |
| Nearside Rear wheel bearing rough when rotated |2.6.1| | 3 |
| Parking brake lever has no reserve travel |3.1.6b| | 3 |
| Horn not working (7.7 (a)) | 3 |
| Offside Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 3 |
| Offside Front wheel bearing has excessive play |2.5.A.3c| | 3 |
| Exhaust emissions hydrocarbon content excessive |7.3.B.1b| | 3 |
| Nearside Front Front constant velocity joint gaiter split |2.5.C.1a| | 3 |
| Nearside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 3 |
| Offside Front Body has a sharp edge caused by corrosion |6.1.C.1| | 3 |
| Offside Front Lower Suspension arm has excessive play in a ball joint |2.4.G.2| | 3 |
| Offside Front Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 2 |
| Nearside Front Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 2 |
| Offside Front Lower Body has a sharp edge caused by corrosion |6.1.C.1| | 2 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Offside Front Front constant velocity joint gaiter split |2.5.C.1a| | 2 |
| Brake pedal anti-slip provision incomplete |3.3.A.1b| | 2 |
| Horn not working |1.6.2a| | 2 |
| Exhaust engine idle speed too high |7.3.D.1| | 2 |
| Offside Rear wheel bearing rough when rotated |2.6.1| | 2 |
| Offside Front Front position lamp|s| not working |1.1.A.3b| | 2 |
| Offside Outer Front constant velocity joint gaiter split |2.5.C.1a| | 2 |
| Nearside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 2 |
| Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Offside Rear Position lamp not working (4.2.1 (a) (ii)) | 2 |
| Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c)) | 2 |
| Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b)) | 2 |
| Rear Shock absorber has negligible damping effect |2.7.5| | 2 |
| Nearside Front Suspension arm has excessive play in a ball joint |2.4.G.2| | 2 |
| Nearside Front Position lamp not working (4.2.1 (a) (ii)) | 2 |
| Offside Front Front wheel bearing has excessive play |2.5.A.3c| | 2 |
| Nearside Front Steering rack gaiter split |2.2.D.2d| | 2 |
| Nearside Rear Front wheel bearing rough when rotated |2.5.A.2| | 2 |
| Offside Rear Shock absorber has negligible damping effect |2.7.5| | 2 |
| Nearside Front wheel bearing rough when rotated |2.5.A.2| | 2 |
| Fuel tank leaking |7.2.3| | 2 |
| Battery insecure |1.9.1| | 2 |
| Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 2 |
| Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 2 |
| Nearside Rear Wheel bearing rough when rotated (5.1.3 (b) (i)) | 2 |
| Front Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 2 |
| Emissions not tested |7.3.A.1| | 2 |
| Front brake excessively fluctuating | 2 |
| Nearside Front Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 2 |
| Offside Front Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 2 |
| Nearside Front constant velocity joint is excessively worn |2.5.C.1b| | 2 |
| Nearside Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 2 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Front Exhaust system not adequately supported |7.1.1| | 2 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 2 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 2 |
| Rear Exhaust has a part missing |7.1.1a| | 2 |
| Offside Front Anti-roll bar rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 2 |
| Offside Front Front wheel bearing rough when rotated |2.5.A.2| | 2 |
| Offside Rear Brake pipe leaking |3.6.A.1| | 2 |
| Offside Rear Rear fog lamp not working |1.3.2b| | 2 |
| Centre Exhaust system not adequately supported |7.1.1| | 2 |
| Offside Rear Rear fog lamp not working (4.5.1 (a) (ii)) | 2 |
| Nearside Front All position lamps not working |1.1.A.3b| | 2 |
| Offside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 2 |
| Offside Side repeater not working (4.4.1 (a) (ii)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength arch (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded chassis |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3| | 1 |
| Nearside Inner Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Inner Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Outer Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Front Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 1 |
| Nearside Front Steering arm has relative movement at its fixings |2.2.B.1h| | 1 |
| Offside Front Steering arm has relative movement at its fixings |2.2.B.1h| | 1 |
| Nearside Rear Upper Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Rear Upper Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Front Lower Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
| Nearside Rear Fuel hose leaking |7.2.3| | 1 |
| Nearside Front Front drive shaft damaged |2.5.C.2a| | 1 |
| Nearside Front front parking brake recording little or no effort |3.7.B.6a| | 1 |
| Offside Front Ball joint has excessive play |2.2.B.1f| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Front Lower Shock absorber casing corroded externally so the unit does not function |2.7.2a| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Nearside Front brake disc excessively pitted |3.5.1h| | 1 |
| Offside Front brake disc excessively pitted |3.5.1h| | 1 |
| Nearside Front Mechanical brake component securing device missing |3.5.1i| | 1 |
| Offside Outer Steering rack gaiter insecure |2.2.D.2d| | 1 |
| Driver`s seat insecure |6.2.A.1| | 1 |
| Nearside Front Anti-roll bar rubber bush bonding deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Front Anti-roll bar rubber bush bonding deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Rear Exhaust mounting missing |7.1.1b| | 1 |
| Offside Rear rear brake recording little or no effort |3.7.B.5a| | 1 |
| Nearside Front Tie bar/rod locating pin locking device missing |2.4.G.3b| | 1 |
| Nearside Rear Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Steering component mounting prescribed area is excessively corroded |2.2.C.1h| | 1 |
| Front wheel bearing rough when rotated |2.5.A.2| | 1 |
| Nearside Front Brake pipe leaking |3.6.A.1| | 1 |
| Direction indicator incomplete |1.5.A1b| | 1 |
| Windscreen wiper blade deteriorated |8.2.2| | 1 |
| Nearside Rear Rear position lamp|s| excessively damaged so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
| An item not tested |Manual| | 1 |
| Nearside Headlamp insecure |1.7.3| | 1 |
| Nearside Front Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Front Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Nearside Front Windscreen wiper blade deteriorated |8.2.2| | 1 |
| Nearside Windscreen wiper blade deteriorated |8.2.2| | 1 |
| Offside Windscreen wiper blade deteriorated |8.2.2| | 1 |
| Offside Inner Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch front |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wheel arch rear |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch rear |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner sill |2.4.A.3| | 1 |
| Offside Front Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
| Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement |7.2.4b| | 1 |
| Offside Front Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Exhaust has a major leak of exhaust gases Centre pipe rear (6.1.2 (a)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill box section (5.3.6 (a) (i)) | 1 |
| Offside Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |
| Exhaust has a major leak of exhaust gases front centre pipe bracket area (6.1.2 (a)) | 1 |
| Exhaust has a major leak of exhaust gases rear silencer (6.1.2 (a)) | 1 |
| Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i)) | 1 |
| Nearside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Offside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill corner (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill corner (5.3.6 (a) (i)) | 1 |
| Offside Exhaust has a major leak of exhaust gases Engine manifold area (6.1.2 (a)) | 1 |
| Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 1 |
| Offside Rear Service brake excessively binding (1.2.1 (f)) | 1 |
| Offside Rear Service brake lagging in operation (1.2.1 (d)) | 1 |
| Nearside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt |6.1.7 |g| |ii|| | 1 |
| Exhaust has a major leak of exhaust gases Rear of front pipe |7.1.2| | 1 |
| Nearside Rear Subframe mounting prescribed area is excessively corroded Inner arch area |2.4.A.3| | 1 |
| Exhaust has a major leak of exhaust gases Centre silencer |7.1.2| | 1 |
| Nearside Front Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
| Offside rear brake grabbing severely |3.7.A.5b| | 1 |
| Nearside Front Seat belt has a cut which has significantly weakened the webbing |5.2.2a| | 1 |
| Exhaust has a major leak of exhaust gases Centre joint area |6.1.2 |a|| | 1 |
| Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer`s specified limits |8.2.1.2 |a|| | 1 |
| Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt |6.1.7 |g| |ii|| | 1 |
| Nearside Front Lower Body panel damaged and likely to cause injury |6.2.1 |a| |i|| | 1 |
| Offside Front Lower Body panel damaged and likely to cause injury |6.2.1 |a| |i|| | 1 |
| Nearside Inner Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill corrded (7.1.1 (a) (i)) | 1 |
| Nearside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
| Offside Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner arch |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner arch |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded chasis |2.4.A.3| | 1 |
| Offside Inner Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
| Nearside Rear Braking system leaking |3.6.A.1| | 1 |
| Nearside rear brake recording little or no effort |3.7.B.5a| | 1 |
| Nearside Front Lower Ball joint has excessive play |2.2.B.1f| | 1 |
| Emissions unable to be completed (8.2.1.2 (d)) | 1 |
| Central Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Nearside Front Front constant velocity joint is excessively worn |2.5.C.1b| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Offside Rear Stop lamp emits other than a steady red light |1.2.1e| | 1 |
| Offside Rear wheel bearing has excessive play |2.6.2| | 1 |
| Nearside Outer Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
| Exhaust emits excessive dense blue smoke during acceleration |7.3.A.2c| | 1 |
| Nearside Rear Brake pipe excessively damaged |3.6.B.2c| | 1 |
| Exhaust tailpipe not capable of allowing the emission probe to be inserted |7.3.B.1| | 1 |
| Front brake application uneven | 1 |
| Nearside front parking brake recording little or no effort |3.7.B.6a| | 1 |
| Nearside Body has a sharp edge caused by damage |6.1.C.1| | 1 |
| Centre Front Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Body has a sharp edge caused by damage |6.1.C.1| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Side repeater not working |1.4.A.2c| | 1 |
| Nearside Front Outer Anti-roll bar rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Rear Exhaust has a major leak of exhaust gases silencer holed and incomplete |7.1.2| | 1 |
| Nearside Front Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
| Offside Front Inner Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
| Offside Front Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
| Nearside Front Lower Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded wheel arch |2.4.A.3| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded wheel arch |2.4.A.3| | 1 |
| Horn not working (7.7 (a) (ii)) | 1 |
| Nearside Front Lower Steering linkage ball joint ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
| Offside Front Lower Steering linkage ball joint ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
| Windscreen washer not working | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength near axle mounting rear bolt (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under wheel arch (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength under wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Offside Front Position lamp not working (4.2.1 (a) (ii)) | 1 |
| Nearside Rear Position lamp not working (4.2.1 (a) (ii)) | 1 |
| Nearside Front Inner Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength wheel arch |5.3.6 |a| |i|| | 1 |
| Exhaust emissions carbon monoxide content excessive |8.2.1.2 |b|| | 1 |
| Offside Rear Brake pipe connection leaking on a hydraulic braking system pipe to flexi (1.1.11 (b) (ii)) | 1 |
| Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 1 |
| Central Exhaust emissions likely to be affected by an exhaust leak (8.2.2.1 (b)) | 1 |
| Rear Exhaust emissions likely to be affected by an exhaust leak (8.2.2.1 (b)) | 1 |
| Nearside Rear Bumper damaged and likely to cause injury when grazed or contacted bumper mounting corroded causing jagged edges (6.1.4 (a) (i)) | 1 |
| Offside Front Inner Prop shaft joint constant velocity boot no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 1 |
| Offside Front Outer Prop shaft joint constant velocity boot no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 1 |
| Nearside Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
| Offside Rear Shock absorbers has a serious fluid leak | 1 |
| Nearside Front Wheel bearing play so excessive that directional control is impaired (5.1.3 (a) (ii)) | 1 |
| Offside Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Nearside Front Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 1 |
| Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Nearside Rear Direction indicator incorrect colour (4.4.3 (a)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Rear Inner Subframe mounting prescribed area is excessively corroded sill |2.4.A.3| | 1 |
| Offside Rear Subframe mounting prescribed area is excessively corroded chassis |2.4.A.3| | 1 |
| Nearside Front Inner Subframe mounting prescribed area is excessively corroded wheel arch |2.4.A.3| | 1 |
| Offside Rear Inner Subframe mounting prescribed area is excessively corroded wheel arches |2.4.A.3| | 1 |
| Nearside Rear Inner Subframe mounting prescribed area is excessively corroded wheel arch |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded shock absorber mount |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded shock absorber mount |2.4.A.3| | 1 |
| Nearside Front Inner Seat belt anchorage prescribed area is excessively corroded sill |5.2.6| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded floor |5.2.6| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded floor |5.2.6| | 1 |
| Offside Front constant velocity joint is insecure |2.5.C.1b| | 1 |
| Steering column universal joint has excessive play |2.1.5| | 1 |
| Fuel cap/sealing device sealing washer missing |7.2.4c| | 1 |
| Nearside Rear rear brake grabbing severely |3.7.A.5b| | 1 |
| Nearside Rear Body insecure and dangerous to other road users |6.1.B.1b| | 1 |
| Offside Front Body insecure and dangerous to other road users |6.1.B.1b| | 1 |
| Offside Front Braking system leaking caliper |3.6.A.1| | 1 |
| Nearside Rear brake disc contaminated by brake fluid |3.5.1h| | 1 |
| Brake hydraulic reservoir fluid level below minimum level |3.6.G.1b| | 1 |
| Offside front brake recording little or no effort |3.7.B.5a| | 1 |
| Offside front parking brake recording little or no effort |3.7.B.6a| | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
| Offside Rear position lamp|s| not working |1.1.A.3b| | 1 |
| Offside Front constant velocity joint is excessively worn |2.5.C.1b| | 1 |
| Nearside Inner Ball joint has excessive play |2.2.B.1f| | 1 |
| Nearside Outer Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 1 |
| Offside Outer Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 1 |
| Nearside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
| Offside Rear Wheel bearing so rough it is likely to overheat or break up |5.1.3 |b| |ii|| | 1 |
| Nearside Rear Suspension arm attachment bracket/mounting corroded and seriously weakened inner sill |5.3.3 |b| |i|| | 1 |
| Offside Rear Suspension arm attachment bracket/mounting corroded and seriously weakened inner sill |5.3.3 |b| |i|| | 1 |
| Offside Headlamp not working on dipped beam |1.7.5a| | 1 |
| Nearside Lower Ball joint has excessive play |2.2.B.1f| | 1 |
| Offside Lower Ball joint has excessive play |2.2.B.1f| | 1 |
| Rear Shock absorber has an excessively worn linkage |2.7.4| | 1 |
| Offside Front Front constant velocity joint is excessively worn |2.5.C.1b| | 1 |
| Nearside Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 1 |
| Nearside Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
| Nearside rear brake grabbing severely |3.7.A.5b| | 1 |
| Rear fog lamp tell tale not working |1.3.1b| | 1 |
| Offside Front Service brake excessively binding (1.2.1 (f)) | 1 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Nearside Rear Vehicle structure has a modification which adversely affects braking or steering |6.1.A.1| | 1 |
| Offside Rear Vehicle structure has a modification which adversely affects braking or steering |6.1.A.1| | 1 |
| Front Steering rack damaged and unserviceable |2.2.C.1d| | 1 |
| Nearside Fuel system component insecure |7.2.1| | 1 |
| Nearside Front Direction indicator not working |1.4.A.2c| | 1 |
| Parking brake: efficiency below requirements |3.7.C.1b| | 1 |
| Offside Front Direction indicator incomplete |1.5.A1b| | 1 |
| Nearside Rear Mechanical brake component securing device missing |3.5.1i| | 1 |
| Nearside Rear wheel cylinder has restricted free movement |3.5.1k| | 1 |
| Nearside Rear Shock absorber has negligible damping effect |2.7.5| | 1 |
| Nearside Front Direction indicator incomplete |1.5.A1b| | 1 |
| Nearside Front Front suspension locking device missing |2.5.A.4| | 1 |
| Offside Front Front suspension locking device missing |2.5.A.4| | 1 |
| Nearside Rear Axle has inadequate clearance with the bump stop |2.4.A.1a| | 1 |
| Offside Rear Axle has inadequate clearance with the bump stop |2.4.A.1a| | 1 |
| Trailer electrical socket insecure |1.9.3a| | 1 |
| Nearside Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Nearside Front Anti-roll bar attachment bracket/mounting insecure |2.4.G.1| | 1 |
| Towbar component excessively corroded |6.6.1| | 1 |
| Towbar component fractured |6.6.1| | 1 |
| Nearside Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
| Vehicle structure excessively corroded within 30cm of towbar mounting |6.6.6| | 1 |
| Offside Front front brake binding |3.7.B.1| | 1 |
| Offside Front Windscreen wiper blade deteriorated |8.2.2| | 1 |
| Nearside Front Front suspension has excessive play in a upper suspension ball joint |2.5.B.1a| | 1 |
| Nearside Rear Upper Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
| Offside Rear Upper Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
| Nearside Rear Lower Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
| Offside Rear Lower Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
| Rear Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Rear Rear wheel bearing rough when rotated |2.6.1| | 1 |
| Nearside Front Anti-roll bar rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Braking system leaking |3.6.A.1| | 1 |
| Rear rear brake recording little or no effort |3.7.B.5a| | 1 |
| Front rear brake recording little or no effort |3.7.B.5a| | 1 |
| Rear brake binding | 1 |
| Offside Front Lower Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Offside Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Front Suspension arm has excessive play in a pin/bush |2.4.G.2| | 1 |
| Exhaust system not adequately supported |7.1.1| | 1 |
| Nearside Inner Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Inner Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Fuel hose insecure |7.2.1| | 1 |
| Offside Front Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded outer sill and closing panel |2.4.A.3| | 1 |
| Offside Rear Drive shaft which forms part of the suspension coupling gaiter insecure to the extent that it no longer prevents the ingress of dirt etc |2.4.G.4e| | 1 |
| Offside Front Steering column universal joint has excessive play |2.1.5| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Rear Wheel nut|s| missing |4.2.A.1e| | 1 |
| Offside rear brake juddering severely |3.7.A.5b| | 1 |
| Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced cross member (6.1.1 (c) (i)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 1 |
| Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturers specified limits (8.2.1.2 (a)) | 1 |
| Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) | 1 |
| Centre Exhaust mounting missing |7.1.1b| | 1 |
| Rear Lower Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
| Nearside Front Headlamp insecure |1.7.3| | 1 |
| Offside Rear rear brake grabbing severely |3.7.A.5b| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Offside Steering rack gaiter insecure |2.2.D.2d| | 1 |
| Rear Exhaust has a major leak of exhaust gases rear box |7.1.2| | 1 |
| Fuel hose leaking |7.2.3| | 1 |
| Exhaust has a major leak of exhaust gases blowing at front and rear |7.1.2| | 1 |
| Nearside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 1 |
| Nearside Rear Suspension component mounting prescribed area fractured significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 1 |
| Steering rack has excessive free play detected at the steering wheel to the extent that safe steering is affected (steering rack fitted) (2.3 (a) (ii)) | 1 |
| Front Drag link end ball joint has excessive play (2.1.3 (b) (i)) | 1 |
| Offside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 1 |
| Front Anti-roll bar pin or bush excessively worn both (5.3.4 (a) (i)) | 1 |
| Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
| Nearside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
| Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
| Offside Rear Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
| Centre Rear Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Nearside Headlamp not working on dipped beam |1.7.5a| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 1 |
| Nearside Rear Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheelarch |6.2.2 |d| |i|| | 1 |
| Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wheel arch |6.1.1 |c| |i|| | 1 |
| Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced floor |6.1.1 |c| |i|| | 1 |
| Offside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sill |6.1.1 |c| |i|| | 1 |
| Nearside Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
| Offside Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
| Lower Steering pivot point has excessive play |2.2.B.1g| | 1 |
| Nearside Steering rack gaiter missing or no longer prevents the ingress of dirt |2.1.3 |g| |ii|| | 1 |
| Offside Steering rack gaiter missing or no longer prevents the ingress of dirt |2.1.3 |g| |ii|| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded sill. |2.4.A.3| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded sill. |2.4.A.3| | 1 |
| Offside Rear Outer Suspension component mounting prescribed area is excessively corroded sill. |2.4.A.3| | 1 |
| Nearside Outer Seat belt anchorage prescribed area is excessively corroded sill. |5.2.6| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded wheel arch. |2.4.A.3| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded wheel arch. |2.4.A.3| | 1 |
| Offside Rear Fuel pipe leaking |7.2.3| | 1 |
| Front constant velocity joint is excessively worn |2.5.C.1b| | 1 |
| Nearside Front Front wheel bearing rough when rotated |2.5.A.2| | 1 |
| Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Front Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Offside Rear Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
| Offside Front Direction indicator excessively damaged so that it is not visible from a reasonable distance |1.4.A.2e| | 1 |
| Nearside Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Inner Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Stop lamp not working |1.2.1b| | 1 |
| Offside Obligatory mirror insecure |8.1.1| | 1 |
| Nearside Front Outer Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Offside Front Outer Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis as marked (5.3.6 (a) (i)) | 1 |
| Nearside Front Tie bar/rod has excessive play in a ball joint |2.4.G.2| | 1 |
| Offside Front Tie bar/rod has excessive play in a ball joint |2.4.G.2| | 1 |
| Offside Rear Shock absorber has a serious fluid leak |2.7.3| | 1 |
| Fuel pipe leaking |7.2.3| | 1 |
| Rear Drive shaft uj which forms part of the suspension has excessive play in a universal joint |2.4.G.4b| | 1 |
| Offside Rear Body has a sharp edge caused by damage |6.1.C.1| | 1 |
| Nearside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
| Offside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |