| Most common failures | No# failures |
|---|
| Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 46 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 44 |
| Headlamp aim out of alignment | 29 |
| Brake pipe excessively corroded | 22 |
| Windscreen wiper does not clear the windscreen effectively | 21 |
| Brake hose excessively deteriorated | 17 |
| Nearside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 11 |
| Exhaust has a major leak of exhaust gases |7.1.2| | 9 |
| Offside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 9 |
| Parking brake lever has no reserve travel |3.1.6b| | 8 |
| Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 8 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 8 |
| Rear Exhaust has a major leak of exhaust gases |7.1.2| | 7 |
| Nearside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 7 |
| Nearside Front Body has a sharp edge caused by corrosion |6.1.C.1| | 7 |
| Front Exhaust has a major leak of exhaust gases |7.1.2| | 6 |
| Registration plate lamp issues | 6 |
| Brakes imbalanced across an axle | 6 |
| Offside Front Body has a sharp edge caused by corrosion |6.1.C.1| | 6 |
| Service brake: efficiency below requirements |3.7.B.7| | 6 |
| Horn not working |1.6.2a| | 6 |
| Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 5 |
| Parking brake: efficiency below requirements |3.7.B.7| | 5 |
| Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 5 |
| Nearside Stop lamp not working |1.2.1b| | 4 |
| Nearside Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 4 |
| Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 4 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 4 |
| Nearside Front Suspension arm has excessive play in a ball joint |2.4.G.2| | 3 |
| Nearside Windscreen wiper blade deteriorated |8.2.2| | 3 |
| Windscreen wiper blade insecure | 3 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
| Offside Front position lamp|s| not working |1.1.A.3b| | 3 |
| Rear brake application uneven | 3 |
| Registration plate issues | 3 |
| Offside Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 3 |
| Offside front brake binding |3.7.B.1| | 3 |
| Offside Front constant velocity joint gaiter split |2.5.C.1a| | 3 |
| Nearside Inner Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
| Offside Inner Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
| Horn not working (7.7 (a)) | 3 |
| Offside Front Suspension arm has excessive play in a ball joint |2.4.G.2| | 3 |
| Centre Exhaust has a major leak of exhaust gases |7.1.2| | 3 |
| Offside Rear fog lamp not working |1.3.2b| | 3 |
| Battery insecure |1.9.1| | 3 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
| Offside Rear Shock absorbers has a serious fluid leak | 2 |
| Nearside Rear Body has a sharp edge caused by damage |6.1.C.1| | 2 |
| Offside Front Front wheel bearing has excessive play |2.5.A.3c| | 2 |
| Offside Windscreen wiper blade deteriorated |8.2.2| | 2 |
| Nearside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Nearside Inner Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Offside Inner Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Offside Outer Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Nearside Front constant velocity joint gaiter split |2.5.C.1a| | 2 |
| Nearside Front Front wheel bearing has excessive play |2.5.A.3c| | 2 |
| Offside Rear fog lamp missing |1.3.2a| | 2 |
| Nearside Rear Shock absorber has a serious fluid leak |2.7.3| | 2 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Nearside Headlamp not working on dipped beam |1.7.5a| | 2 |
| Offside Headlamp not working on dipped beam |1.7.5a| | 2 |
| Offside Front Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 2 |
| Offside Side repeater not working |1.4.A.2c| | 2 |
| Offside Front Front constant velocity joint gaiter split |2.5.C.1a| | 2 |
| Offside front brake recording little or no effort |3.7.B.5a| | 2 |
| Offside Obligatory mirror insecure |8.1.1| | 2 |
| Nearside Front Shock absorber has a serious fluid leak |2.7.3| | 2 |
| Exhaust emits dense blue smoke at idle |7.3.A.2b| | 2 |
| Exhaust emits excessive dense blue smoke during acceleration |7.3.A.2c| | 2 |
| Nearside Rear Shock absorber has negligible damping effect |2.7.5| | 2 |
| Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 2 |
| Front brake application uneven | 2 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 2 |
| Nearside Front Front constant velocity joint is excessively worn |2.5.C.1b| | 2 |
| Offside Front wheel bearing has excessive play |2.5.A.3c| | 2 |
| Nearside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 2 |
| Offside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 2 |
| Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Nearside Front wheel bearing has excessive play |2.5.A.3c| | 2 |
| Emissions not tested |7.0| | 2 |
| Nearside front parking brake recording little or no effort |3.7.B.6a| | 2 |
| Nearside Rear Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Offside Rear Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
| Front brake disc in such a condition that it is seriously weakened | 2 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Nearside Front wheel bearing rough when rotated |2.5.A.2| | 2 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength upper mounting/inner wing (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Upper mounting/inner wing (5.3.6 (a) (i)) | 1 |
| Rear Brake pipe leaking on a hydraulic braking system pipe fitting compensater valve to nsr. (1.1.11 (b) (ii)) | 1 |
| Horn not working (7.7 (a) (ii)) | 1 |
| Seat belt anchorage prescribed area strength or continuity significantly reduced Inner and outer sills both sides. (7.1.1 (a) (i)) | 1 |
| Nearside Rear Position lamp not working (4.2.1 (a) (ii)) | 1 |
| Battery insecure and likely to fall from carrier (4.13 (a) (ii)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill and floorpan (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wheel arch,inner and outer sill. (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wheel arch, inner and outer sill. (5.3.6 (a) (i)) | 1 |
| Nearside Rear Service brake excessively binding (1.2.1 (f)) | 1 |
| Nearside Rear Brake pipe leaking on a hydraulic braking system (1.1.11 (b) (ii)) | 1 |
| Nearside Rear Service brake lagging in operation (1.2.1 (d)) | 1 |
| Offside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
| Offside Steering pivot point has excessive play |2.2.B.1g| | 1 |
| Rear Exhaust system not adequately supported |7.1.1| | 1 |
| Offside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Brake hose damaged | 1 |
| Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Front Wheel nut|s| loose |4.2.A.1e| | 1 |
| Nearside Rear Wheel nut|s| loose |4.2.A.1e| | 1 |
| Nearside Front Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
| Nearside Inner Rear Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Outer Rear Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Inner Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Outer Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Exhaust emits visible black smoke at idle |7.3.A.2b| | 1 |
| Offside Outer Front Lower Suspension arm has excessive play in a pin/bush |2.4.G.2| | 1 |
| Offside Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Oil leaking excessively from engine (8.4.1 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength trailing arm, subframe mounting area (5.3.6 (a) (i)) | 1 |
| Nearside Front Position lamp not working |4.2.1 |a|| | 1 |
| Windscreen wiper not working |3.4 |a|| | 1 |
| Offside Front Suspension component ball joint excessively worn |5.3.4 |a| |i|| | 1 |
| Nearside Front Suspension component ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 1 |
| Offside Front Suspension component ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill panel |5.3.6 |a| |i|| | 1 |
| Emissions not tested Idle speed to high |8.2.1.2 |d|| | 1 |
| Front Steering system has excessive free play detected at the steering wheel |steering rack fitted| |2.2.A.1b| | 1 |
| Nearside Outer Front Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
| Offside Front Upper Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Parking brake efficiency below requirements (1.4.2 (a) (i)) | 1 |
| Offside Rear Rear fog lamp not working |4.5.1 |a| |ii|| | 1 |
| Parking brake efficiency below requirements |1.4.2 |a| |i|| | 1 |
| Nearside Inner Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Inner Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Rear Shock absorber casing corroded externally so the unit does not function |2.7.2a| | 1 |
| Offside Front brake disc excessively pitted |3.5.1h| | 1 |
| Nearside Inner Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Front Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
| Offside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
| Offside Inner Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Rear brake binding | 1 |
| Nearside Seat belt affected by an insecure seat fixing |5.2.1b| | 1 |
| Offside Seat belt affected by an insecure seat fixing |5.2.1b| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded floor panel at rear |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded floor panel at rear |5.2.6| | 1 |
| Nearside Rear Upper Suspension component mounting prescribed area is excessively corroded shock absorber mount |2.4.A.3| | 1 |
| Offside Rear Upper Suspension component mounting prescribed area is excessively corroded shock absorber mount |2.4.A.3| | 1 |
| Fuel pipe leaking |7.2.3| | 1 |
| Nearside Front Steering rack gaiter split |2.2.D.2d| | 1 |
| Offside Front Steering rack gaiter split |2.2.D.2d| | 1 |
| Nearside Front Front drive shaft damaged |2.5.C.2a| | 1 |
| Offside Rear Shock absorber has negligible damping effect |2.7.5| | 1 |
| Nearside Front front brake binding |3.7.B.1| | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
| Offside Front Front constant velocity joint is excessively worn |2.5.C.1b| | 1 |
| Offside Steering rack gaiter split |2.2.D.2d| | 1 |
| Nearside Front Braking system leaking |3.6.A.1| | 1 |
| Offside Outer Front Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
| Nearside Outer Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Outer Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Outer Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
| Nearside Steering rack gaiter split |2.2.D.2d| | 1 |
| Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b)) | 1 |
| Nearside Rear Direction indicator not working |1.4.A.2c| | 1 |
| Nearside Rear Direction indicator incomplete |1.5.A1b| | 1 |
| Rear Rear fog lamp not working |1.3.2b| | 1 |
| Exhaust emissions hydrocarbon content excessive |7.3.B.1b| | 1 |
| Offside Front Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
| Offside Front suspension has a suspension lower ball joint securing nut not locked |2.5.B.1a| | 1 |
| Offside Front Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Front Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Inner Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside rear brake grabbing severely |3.7.A.5b| | 1 |
| Offside rear brake grabbing severely |3.7.A.5b| | 1 |
| Nearside Front Lower Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
| Offside Front Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a| | 1 |
| Nearside Rear position lamp|s| not working |1.1.A.3b| | 1 |
| Nearside Rear Stop lamp not working |1.2.1b| | 1 |
| Nearside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
| Offside Headlamp excessively damaged so that the light output is severely reduced |1.7.5a| | 1 |
| Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Rear Body has a sharp edge caused by damage |6.1.C.1| | 1 |
| Offside Rear Direction indicator incorrect colour |1.4.A.2f| | 1 |
| Offside Rear Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
| Offside Front Brake pipe excessively damaged |3.6.B.2c| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
| Offside Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
| Nearside Outer Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Brake hose has insufficient room to move | 1 |
| Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Nearside Front Ball joint ball pin shank loose |2.2.B.1c| | 1 |
| Offside Front Ball joint ball pin shank loose |2.2.B.1c| | 1 |
| Offside Inner Front Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
| Nearside Rear rear brake recording little or no effort |3.7.B.5a| | 1 |
| Nearside Outer Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Fuel system component leaking |7.2.3| | 1 |
| Offside Front Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
| Offside Outer Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
| front brake recording little or no effort |3.7.B.5a| | 1 |
| Brake pedal has insufficient reserve movement |3.3.A.5| | 1 |
| Nearside Front brake disc excessively pitted |3.5.1h| | 1 |
| Offside Front Braking system leaking |3.6.A.1| | 1 |
| Offside Front Vehicle structure has an inadequate repair which adversely affects braking or steering |6.1.A.1| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis leg |5.3.6 |a| |i|| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded inner sill |5.2.6| | 1 |
| Offside Stop lamp not working |1.2.1b| | 1 |
| Nearside Rear Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
| Nearside Rear Suspension has inadequate clearance with the bump stop |2.4.A.1a| | 1 |
| Offside Rear Suspension has inadequate clearance with the bump stop |2.4.A.1a| | 1 |
| Rear Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
| Offside Front Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Brake pedal anti-slip provision incomplete |3.3.A.1b| | 1 |
| Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Offside Front Macpherson strut attachment bracket/mounting insecure and impairing directional stability (5.3.3 (a) (ii)) | 1 |
| Service brake efficiency below requirements (1.2.2 (a) (i)) | 1 |
| Offside Front suspension has a suspension lower ball joint securing nut not locked split pin missing |2.5.B.1a| | 1 |
| Nearside Front Brake cable insecure fowling driveshaft |3.5.1d| | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
| Offside Rear Sub-frame corroded and seriously weakened |2.4.G.1| | 1 |
| Nearside Rear Sub-frame corroded and seriously weakened |2.4.G.1| | 1 |
| Nearside Rear Shock absorber has an excessively worn shock absorber pivot |2.7.4| | 1 |
| Offside Rear Shock absorber has an excessively worn bush |2.7.4| | 1 |
| Rear Body insecure and dangerous to other road users |6.1.B.1b| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Service brake: efficiency below requirements |3.7.C.1a| | 1 |
| Nearside Front Brake hose stretched |found during steering lock to lock check| |2.2.D.2b| | 1 |
| Offside Front Brake hose stretched |found during steering lock to lock check| |2.2.D.2b| | 1 |
| Hazard warning lamps not flashing in phase, with ignition on |1.4.B.1f| | 1 |
| Hazard warning lamps not flashing in phase, with ignition off |1.4.B.1f| | 1 |
| Hazard warning tell tale not working correctly |1.4.B.1e| | 1 |
| Direction indicators not working |1.4.A.2c| | 1 |
| Indicator tell tale inoperative |1.4.A.2a| | 1 |
| Offside Rear position lamp|s| not working |1.1.A.3b| | 1 |
| Windscreen wiper not operating automatically when switched on |8.2.1b| | 1 |
| Driver`s seat insecure |6.2.A.1| | 1 |
| front parking brake recording little or no effort |3.7.B.6a| | 1 |
| Steering system excessively rough |2.2.D.1| | 1 |
| Front Steering system lock to lock check stretches a brake pipe |2.2.D.2b| | 1 |
| Rear Brake pipe inadequately supported |3.6.B.1| | 1 |
| Steering rack insecure |2.2.B.1a| | 1 |
| Offside Headlamp aim aimed so that it dazzles other road users |1.8.A.1a| | 1 |
| Nearside Front All position lamps not working |1.1.A.3b| | 1 |
| Offside Front All position lamps not working |1.1.A.3b| | 1 |
| Nearside Rear All position lamps not working |1.1.A.3b| | 1 |
| Offside Windscreen wiper blade missing |8.2.2| | 1 |
| Driver`s door cannot be opened from outside the vehicle |6.2.B.1b| | 1 |
| Nearside Rear Front wheel bearing has excessive play |2.5.A.3c| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.1 (c) (ii)) | 1 |
| Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering (6.1.1 (c) (ii)) | 1 |
| Offside Front Vehicle structure is fractured and structural rigidity is significantly reduced (6.1.1 (a) (i)) | 1 |
| Nearside Front Vehicle structure is fractured and structural rigidity is significantly reduced (6.1.1 (a) (i)) | 1 |
| Nearside Rear Vehicle structure is fractured and structural rigidity is significantly reduced (6.1.1 (a) (i)) | 1 |
| Offside Rear Body has a sharp edge caused by damage |6.1.C.1| | 1 |
| Offside Steering system has excessive free play detected at the steering wheel |steering rack fitted| |2.2.A.1b| | 1 |
| Nearside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
| Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 1 |
| Nearside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 1 |
| Nearside Rear Shock absorbers has a serious fluid leak | 1 |
| Nearside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Offside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Rear Prop shaft joint excessively worn (6.1.7 (c) (i)) | 1 |
| Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement |7.2.4b| | 1 |
| Fuel cap/sealing device sealing washer torn |7.2.4c| | 1 |
| Rear Mechanical brake component has restricted free movement | 1 |
| Offside Rear Upper Suspension component mounting prescribed area is excessively corroded shocker top |2.4.A.3| | 1 |
| Offside Inner Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
| Nearside Outer Front Anti-roll bar rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Outer Front Anti-roll bar rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Front position lamp|s| not working |1.1.A.3b| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Centre Exhaust system not adequately supported |7.1.1| | 1 |
| Fuel hose leaking |7.2.3| | 1 |
| Nearside Front Front position lamp|s| not working |1.1.A.3b| | 1 |
| Nearside Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Outer Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Front Steering arm has relative movement at its fixings |2.2.B.1h| | 1 |
| Nearside Front Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
| Offside Rear Subframe mounting prescribed area is fractured |2.4.A.3| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i)) | 1 |
| Fuel tank leaking (6.1.3 (b) (i)) | 1 |
| Nearside Headlamp aim aimed so that it dazzles other road users |1.8.A.1a| | 1 |
| Nearside Side repeater not working |1.4.A.2c| | 1 |
| Offside Front Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Rear Braking system leaking |3.6.A.1| | 1 |
| Offside Rear Brake pipe leaking |3.6.A.1| | 1 |
| Offside Front front parking brake recording little or no effort |3.7.B.6a| | 1 |
| Nearside Front Upper Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Inner Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Inner Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
| Nearside Front Exhaust has a major leak of exhaust gases |7.1.2| | 1 |