| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 16 |
| Rear reflector on motorcycle missing |1.4.1| | 10 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 9 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 8 |
| Drive chain excessively loose |6.2.1d| | 8 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 8 |
| Steering headbearing has excessive free play |2.2.2| | 6 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
| Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 4 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 4 |
| Riders seat insecure |6.2.1a| | 4 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 4 |
| Horn not working |1.7.3a| | 3 |
| Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 3 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 3 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
| Throttle operating incorrectly |6.2.1f| | 3 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 3 |
| Headlamp aim not tested |1.6| | 3 |
| Fuel cap sealing washer missing |7.2.2c| | 3 |
| Front Wheel spoke excessively loose |4.2.1b| | 2 |
| Headlamp insecure |1.2.3b| | 2 |
| Front wheel bearings have excessive free play |2.3.5b| | 2 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 2 |
| Rear reflector on motorcycle obscured |1.4.1| | 2 |
| Registration plate issues | 2 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
| Drive chain excessively tight |6.2.1d| | 2 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
| Drive chain worn to excess |6.2.1e| | 2 |
| Brake pipe excessively damaged |3.2.B2a| | 2 |
| Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Suspension component pin or bush excessively worn Swinging arm (5.3.4 (a) (i)) | 1 |
| Motorcycle structure cracked |6.1.1a| | 1 |
| Indicator tell tale not functioning |1.5.2| | 1 |
| Nearside Front Direction indicators not working |1.5.1c| | 1 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Offside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Nearside Front Position lamp switch insecure |1.1.4b| | 1 |
| Front wheel spindle loose |2.3.3a| | 1 |
| Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
| Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| Rear Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
| Rear Wheel spoke excessively loose |4.2.1b| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
| Horn not working |7.7 |a| |ii|| | 1 |
| Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Front Brake lever excessively damaged |3.2.A1c| | 1 |
| Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
| Front Headlamp lens seriously defective lens not upright (4.1.1 (b) (ii)) | 1 |
| Front Brake disc insecure (1.1.14 (a) (ii)) | 1 |
| Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Headlamp aim not tested no light inspected will not start |1.6| | 1 |
| Rear Drive chain worn to excess |6.2.1e| | 1 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Nearside Rear Direction indicator missing |1.5.1a| | 1 |
| Offside Rear Direction indicator missing |1.5.1a| | 1 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Front Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 1 |
| Front Direction indicator incorrect colour (4.4.3 (a)) | 1 |
| Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Offside Rear Direction indicator likely to become detached (4.4.1 (c) (ii)) | 1 |
| Rear Footrest missing both (6.2.12 (a)) | 1 |
| Direction indicator missing |1.5.1a| | 1 |
| Rear Upper Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Rear Brake linkage has abnormal movement due to excessive wear |3.2.A1i| | 1 |
| Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
| Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Offside Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Rear All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
| Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
| Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
| Nearside Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Nearside Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Offside Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Offside Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Front mudguard insecure |2.3.7| | 1 |
| Rear Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
| Fuel system component insecure |7.2.1b| | 1 |
| Fuel system component leaking |7.2.1a| | 1 |
| Nearside Front Direction indicator not working |1.5.1c| | 1 |
| Nearside Rear Direction indicator not working |1.5.1c| | 1 |
| Offside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
| Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
| Chain guard insecure |6.2.1c| | 1 |
| Brake hose excessively deteriorated | 1 |
| Steering linkage has excessive free play |2.2.2| | 1 |
| Nearside Handlebar deformed |2.1.1b| | 1 |
| Front Headlamp switch faulty |1.2.4| | 1 |
| Horn sound not in accordance with requirements (7.7 (c)) | 1 |
| Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Centre Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
| Nearside Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 1 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Footrest missing Passenger |6.2.1a| | 1 |
| Exhaust is leaking and excessively noisey Exhaust manifold leaking |7.1.1b| | 1 |
| Horn not working (7.7 (a) (ii)) | 1 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Front Steering control handlebar movement restricted by taut cables |2.1.2c| | 1 |
| Rear Brake pedal attachment screws loose |3.1.2b| | 1 |
| Rear wheel insecure |4.2.3b| | 1 |
| Headlamp deteriorated and function impaired |1.2.3a| | 1 |
| Fuel hose leaking |7.2.1a| | 1 |
| Front Brake hose leaking fluid |3.2.B4| | 1 |
| Rear Brake cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 1 |