Most common failures | No# failures |
---|
Headlamp aim out of alignment | 55 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 24 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 18 |
Rear reflector on motorcycle missing |1.4.1| | 18 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 18 |
Steering headbearing has excessive free play |2.2.2| | 17 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 15 |
Drive chain excessively loose |6.2.1d| | 15 |
Offside Rear Direction indicator incorrect colour |1.5.1b| | 14 |
Nearside Rear Direction indicator incorrect colour |1.5.1b| | 14 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 14 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 13 |
Nearside Rear Footrest missing |6.2.1a| | 13 |
Registration plate issues | 12 |
Nearside Front Direction indicator incorrect colour |1.5.1b| | 12 |
Horn not working |1.7.3a| | 12 |
Indicator switch insecure |1.5.4| | 10 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 9 |
Offside Front Direction indicator incorrect colour |1.5.1b| | 9 |
Front Direction indicator incorrect colour |1.5.1b| | 9 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 8 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 8 |
Offside Rear Footrest missing |6.2.1a| | 8 |
Rear Footrest missing |6.2.1a| | 7 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 7 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 6 |
Rear Direction indicator incorrect colour |1.5.1b| | 6 |
Rear Brake caliper|s| insecure |3.2.A1j| | 6 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 6 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 6 |
Throttle operating incorrectly |6.2.1f| | 6 |
Drive chain worn to excess |6.2.1e| | 6 |
Front wheel bearings have excessive free play |2.3.5b| | 6 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 5 |
Rear Drive chain excessively loose |6.2.1d| | 5 |
Drive chain excessively tight |6.2.1d| | 5 |
Offside Rear Direction indicator not working |1.5.1c| | 5 |
Nearside Rear Direction indicators not working |1.5.1c| | 5 |
Front wheel bearings are excessively rough |2.3.5b| | 5 |
Direction indicator incorrect colour |1.5.1b| | 5 |
Headlamp switch insecure |1.2.4| | 4 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 4 |
Nearside Front Footrest insecure |6.2.1a| | 4 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 4 |
Offside Front Direction indicator not working |1.5.1c| | 4 |
Headlamp aim beam image kick up to the offside |1.6| | 4 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 4 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 4 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 4 |
Drive chain sprocket carrier worn to excess |6.2.1e| | 4 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 4 |
Brake lever has inadequate reserve travel |3.1.3b| | 3 |
Rear reflector missing |4.8.2 |a| |ii|| | 3 |
Horn not loud enough to be heard by another road user |1.7.3a| | 3 |
Nearside Front Direction indicator not working |1.5.1c| | 3 |
Brake hose excessively deteriorated | 3 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 3 |
Riders seat insecure |6.2.1a| | 3 |
All direction indicators incorrect colour |4.4.3 |a|| | 3 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 3 |
Brake lever is positioned so that the brake cannot be readily applied |3.1.3c| | 3 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 3 |
Front Front wheel bearings have excessive free play |2.3.5b| | 3 |
Headlamp not working on main beam |4.1.1 |a| |ii|| | 3 |
Rear Shock absorber has negligible damping effect |5.3.2 |b|| | 3 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 3 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 3 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 2 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 2 |
Steering control handlebar movement restricted by trapped cables |2.1.2c| | 2 |
Rear Brake locking device insecure |3.2.A1e| | 2 |
Front Steering headbearing has excessive free play |2.2.2| | 2 |
Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 2 |
Position lamp switch insecure |1.1.4b| | 2 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Registration plate lamp issues | 2 |
Offside Front Footrest insecure |6.2.1a| | 2 |
Headlamp insecure |1.2.3b| | 2 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 2 |
Rear Brake reaction bracket insecure |3.2.A1j| | 2 |
Drive chain excessively loose (6.1.7 (c) (i)) | 2 |
Rear reflector missing (4.8.2 (a) (ii)) | 2 |
Rear Direction indicator not working |1.5.1c| | 2 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 2 |
Horn control defective |1.7.2a| | 2 |
Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Rear Brake excessively binding (1.2.1 (f)) | 2 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Chain guard insecure |6.2.1c| | 2 |
Nearside Front Direction indicators not working |1.5.1c| | 2 |
Offside Front Direction indicators not working |1.5.1c| | 2 |
Rear Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 2 |
Front Direction indicator not working |1.5.1c| | 2 |
Clutch lever bent so it cannot be readily operated. |6.2.1g| | 2 |
Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii)) | 2 |
Front Brake lever mounting insecure |3.1.2a| | 2 |
Offside Front Direction indicator not working |4.4.1 |a| |ii|| | 2 |
Nearside Rear Direction indicator not working |1.5.1c| | 2 |
Headlamp main beam affected by the operation of another lamp |1.2.2c| | 2 |
Nearside Rear Footrest missing |6.2.12 |a|| | 2 |
Stop lamp not working |4.3.1 |a| |ii|| | 2 |
Clutch lever shortened so it cannot be readily operated. badly bent |6.2.1g| | 1 |
Rear Lower Exhaust mounting missing under mount snapped + rear hander insecure |7.1.1c| | 1 |
Drive chain sprocket worn to excess |6.2.1e| | 1 |
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Brake caliper|s| insecure |3.2.A1j| | 1 |
Fuel cap sealing washer deteriorated |7.2.2c| | 1 |
Footrest missing |6.2.1a| | 1 |
Direction indicator not working |1.5.1c| | 1 |
Brake pedal attachment screws loose |3.1.2b| | 1 |
Front suspension assembly component loose |2.3.1| | 1 |
Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
Rear Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
Front Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii)) | 1 |
Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Throttle operating incorrectly sticks and not return (6.2.7 (a) (i)) | 1 |
Rear Valve stem seriously damaged (5.2.3 (j)) | 1 |
Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
Centre Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Fuel system component insecure |7.2.1b| | 1 |
Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Rear Direction indicator missing |1.5.1a| | 1 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Rear reflector on sidecar missing |1.4.1| | 1 |
Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Centre Lower Fuel system component leaking |7.2.1a| | 1 |
Front Brake lever is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
Rear Stop lamp missing |1.3.3a| | 1 |
Front Brake locking device insecure |3.2.A1e| | 1 |
Offside Rear Headlamp at least one does not illuminate on dipped beam main beam not working |1.2.2a|i|| | 1 |
Offside Front Headlamp at least one does not illuminate on main beam no dipped beam operation |1.2.2a|ii|| | 1 |
Central Front Lower Stop lamp not working brake light does not work when foot brake applied (4.3.1 (a) (ii)) | 1 |
Rear Brake effort inadequate at a wheel (1.2.1 (a) (i)) | 1 |
Drive chain sprocket worn to excess (6.1.7 (c) (i)) | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
Riders seat insecure (6.2.5 (a) (ii)) | 1 |
Brake caliper insecure (1.1.16 (c) (i)) | 1 |
Horn sound not in accordance with requirements (7.7 (c)) | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Fuel tank insecure (6.1.3 (a) (i)) | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen no pattern |1.6.B.1| | 1 |
Headlamp switch faulty headlight and high beam works intermittently |1.2.4| | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Front Lower Position lamp not working (4.2.1 (a)) | 1 |
Headlamp aim not tested (4.1.2 (b)) | 1 |
Inner Rear Lower Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Offside Front Upper Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Offside Front Lower Footrest missing |6.2.1a| | 1 |
Hydraulic brake control feels spongy |3.1.4a| | 1 |
Front position lamp obscured more than 50% |1.1.1d| | 1 |
Front Brake excessively binding |1.2.1 |f|| | 1 |
Rear Brake caliper insecurely mounted and braking performance affected |1.1.16 |c| |ii|| | 1 |
Rear Shock absorber has an excessively worn bush |5.3.2 |c|| | 1 |
Headlamp aim not tested |4.1.2 |b|| | 1 |
Centre Rear Lower Decelerometer brake test indicates a sticking brake |3.3.E1d| | 1 |
Centre Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Rear Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
Front Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Nearside Rear Direction indicator damaged and function impaired |1.5.3a| | 1 |
Rear Brake locking device missing |3.2.A1e| | 1 |
Dipswitch does not extinquish main beam/s, leaving at least 1 dipped beam headlamp |1.2.2b|i|| | 1 |
Brake lever is damaged and the brake cannot be readily applied FRONT |3.1.3c| | 1 |
Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 1 |
Front Brake hose leaking fluid |3.2.B4| | 1 |
Offside Direction indicator not working |1.5.1c| | 1 |
Front Brake caliper|s| insecure |3.2.A1j| | 1 |
Brake lever mounting insecure |3.1.2a| | 1 |
Offside Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Indicator switch does not operate the direction indicators on the side selected |1.5.4| | 1 |
Fuel cap ineffective Non locking type fitted (6.1.3 (b) (i)) | 1 |
Pillion seat insecure (6.2.6 (a) (ii)) | 1 |
Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Front Valve stem seriously damaged (5.2.3 (j)) | 1 |
Nearside Front Footrest insecure bolt loose (needs lock nut or split pin fitting) (6.2.12 (a)) | 1 |
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Offside Front Position lamp switch insecure |1.1.4b| | 1 |
Nearside Front Indicator switch insecure |1.5.4| | 1 |
Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen no beam image |1.6.B.1| | 1 |
Brake hose damaged | 1 |
Rear Brake cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Brake component leaking fluid |3.2.B4| | 1 |
Front Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
All position lamps adversely affected by the operation of another lamp |1.1.3b| | 1 |
Front position lamp flickers when tapped lightly by hand |1.1.3c| | 1 |
Nearside Rear Direction indicator insecure |1.5.3b| | 1 |
Rear Front wheel bearings have excessive free play |2.3.5b| | 1 |
Rear Brake component worn and seriously reduced in strength |3.2.A1| | 1 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Centre Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Offside Front Brake locking device insecure |3.2.A1e| | 1 |
Offside Rear Brake locking device insecure |3.2.A1e| | 1 |
Nearside Outer Rear Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 1 |
Rear Brake cylinder insecurely mounted |3.2.B1a| | 1 |
Rear Brake hose excessively kinked |3.2.B3a| | 1 |
Stop lamp does not illuminate immediately a brake applies control 1 & 2 |1.3.1a| | 1 |
Rear Brake disc|s| securing bolt|s| loose |3.2.A1g| | 1 |
Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Rear Stop lamp not working Rear brake lever not working stop light (4.3.1 (a) (ii)) | 1 |
Dipswitch does not deflect the main beam/s, making them into dipped beam/s |1.2.2b|ii|| | 1 |
Rear Direction indicators not working |1.5.1c| | 1 |
Front Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Front Fuel cap sealing washer deteriorated |7.2.2c| | 1 |
Front Horn is not a constant note |1.7.3c| | 1 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Front Steering control handlebar movement restricted by trapped cables |2.1.2c| | 1 |
Front Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Front Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Front Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Rear Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
Rear Brake component damaged and seriously reduced in strength |3.2.A1| | 1 |
Nearside Rear Direction indicator likely to become detached |4.4.1 |c| |ii|| | 1 |
Drive chain excessively tight |6.1.7 |k| |i|| | 1 |
Headlamp at least one does not illuminate on main beam dip beam flickers |1.2.2a|ii|| | 1 |
Stop lamp does not illuminate immediately a brake applies front and rear |1.3.1a| | 1 |
Offside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
Offside Direction indicators not working |1.5.1c| | 1 |
Nearside Footrest missing |6.2.1a| | 1 |
Offside Front Footrest missing |6.2.1a| | 1 |
Front Drive chain sprocket worn to excess |6.2.1e| | 1 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Front Brake caliper leaking (1.1.16 (b) (i)) | 1 |
Front Brake caliper leaking and braking performance affected (1.1.16 (b) (ii)) | 1 |
Front Brake excessively binding (1.2.1 (f)) | 1 |
Steering operation restricted in free movement from lock to lock (2.1.4 (c)) | 1 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.4 |a|| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Nearside Rear Footrest insecure |6.2.1a| | 1 |
Offside Rear Footrest insecure |6.2.1a| | 1 |
Stop lamp switch with a delay in operation (4.3.2 (a) (ii)) | 1 |
Headlamp light source and lamp not compatible (4.1.4 (c)) | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a)) | 1 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Nearside Front Headlamp switch insecure |1.2.4| | 1 |
Offside Front Headlamp switch insecure |1.2.4| | 1 |
Nearside Front Handlebar deformed |2.1.1b| | 1 |
Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
Rear Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
Nearside Footrest insecure |6.2.1a| | 1 |
Offside Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Offside Brake locking device insecure |3.2.A1e| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Front Brake master cylinder insecurely mounted |3.2.B1a| | 1 |
Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
Drive chain worn to excess |6.1.7 |c| |i|| | 1 |
Front Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Nearside Front Direction indicator insecure |1.5.3b| | 1 |
Stop lamp missing |1.3.3a| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Offside Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Offside Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Centre Rear Lower Exhaust mounting missing |7.1.1c| | 1 |
Offside Headlamp switch insecure |1.2.4| | 1 |
Front Throttle operating incorrectly |6.2.1f| | 1 |
Rear Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Centre Front Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Centre Front Upper Steering headbearing has excessive free play |2.2.2| | 1 |
Offside Rear Upper Footrest insecure |6.2.1a| | 1 |
Nearside Rear Upper Footrest missing |6.2.1a| | 1 |
Offside Rear Upper Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Fuel system component leaking |7.2.1a| | 1 |
Offside Rear Footrest missing |6.2.12 |a|| | 1 |
Headlamp insecure |4.1.1 |c|| | 1 |
Front Horn not working |1.7.3a| | 1 |
Indicator switch defective |1.5.4| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Fuel system component leaking excessively or a risk of fire (6.1.3 (b) (ii)) | 1 |
Position lamp switch faulty |1.1.4a| | 1 |
Nearside Front Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
Front Position lamp adversely affected by the operation of another lamp when indicators are used. (4.2.3 (b)) | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
Nearside Drive chain excessively loose |6.2.1d| | 1 |
Nearside Drive chain worn to excess |6.2.1e| | 1 |
Offside Handlebar deformed |2.1.1b| | 1 |
Front mudguard can easily contact the wheel |2.3.7| | 1 |
Headlamp switch faulty |1.2.4| | 1 |
Front wheel spindle loose |2.3.5a| | 1 |
Front wheel spindle securing nut|s| loose |2.3.5a| | 1 |
Indicator tell tale not functioning both |1.5.2| | 1 |
All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Front Brake fluid reservoir fluid not visible (1.1.10 (d) (iii)) | 1 |
Front Brake caliper|s| securing bolt|s| missing |3.2.A1j| | 1 |
Offside Rear Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Nearside Direction indicator incorrect colour |1.5.1b| | 1 |
Offside Direction indicator incorrect colour |1.5.1b| | 1 |
Direction indicator missing |1.5.1a| | 1 |
Offside Indicator switch does not operate the direction indicators on the side selected |1.5.4| | 1 |
Front Front mudguard insecure |2.3.7| | 1 |
Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
Headlamp aim not tested |1.6| | 1 |
Front Brake hose which buldges |3.2.B4| | 1 |
Footrest insecure |6.2.1a| | 1 |
Rear Footrest missing (6.2.12 (a)) | 1 |
Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
Offside Front Direction indicator incorrect colour |4.4.3 |a|| | 1 |
Offside Rear Direction indicator incorrect colour |4.4.3 |a|| | 1 |
Front Position lamp not working side light |4.2.1 |a|| | 1 |
Front Brake pipe at imminent risk of failure or fracture |1.1.11 |a|| | 1 |
Rear Brake pipe likely to become detached or damaged needs reataching |1.1.11 |d| |ii|| | 1 |
Rear Brake caliper insecure |1.1.16 |c| |i|| | 1 |
Forks modification unsafe has a cable stoping free movment |2.2.2 |e|| | 1 |
Front Brake fluid reservoir fluid not visible eye needs changing as misty |1.1.10 |d| |iii|| | 1 |
Rear Brake hose fouling |3.2.B3b| | 1 |
Offside Steering control handlebar movement restricted by trapped cables |2.1.2c| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |