| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 8 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 5 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 5 |
| Rear Position lamp not working (4.2.1 (a)) | 5 |
| Front Position lamp not working (4.2.1 (a)) | 4 |
| Rear reflector missing (4.8.2 (a) (ii)) | 4 |
| Rear Brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 3 |
| Stop lamp remains on when the brakes are released | 3 |
| Headlamp aim not tested (4.1.2 (b)) | 3 |
| Rear Brake effort inadequate at a wheel (1.2.1 (a) (i)) | 2 |
| Rear Brake lagging in operation (1.2.1 (d)) | 2 |
| Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 2 |
| Headlamp aim not tested dip beam not working (4.1.2 (b)) | 2 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 2 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 2 |
| Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 2 |
| Front Headlamp not working on main beam not working from light switch
works when pass light operated (4.1.1 (a) (ii)) | 1 |
| Offside Rear Exhaust system insecure EXHAUST FOULING SUSPENSION (6.1.2 (a)) | 1 |
| Headlamp aim unable to be tested DIPPED NOT WORKING (4.1.2 (b)) | 1 |
| Rear Wheel spindle loose (5.2.1 (c) (i)) | 1 |
| Front Brake excessively binding (1.2.1 (f)) | 1 |
| Rear Brake excessively binding (1.2.1 (f)) | 1 |
| Rear Valve stem seriously damaged (5.2.3 (j)) | 1 |
| Rear Position lamp not working REPLACED BULB (4.2.1 (a)) | 1 |
| Rear Stop lamp not working REPLACED SWITCH (4.3.1 (a) (ii)) | 1 |
| Rear Brake lining(s) less than 1.0 mm thick (1.1.13 (a)) | 1 |
| Nearside Front Fuel system component leaking PETROL TANK/TAP LEAKING (6.1.3 (b) (i)) | 1 |
| Front Horn not working (7.7 (a)) | 1 |
| Offside Rear Footrest insecure (6.2.12 (a)) | 1 |
| Front Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
| Front Exhaust has a major leak of exhaust gases HEADER PIPE LEAKING (6.1.2 (a)) | 1 |
| Nearside Front Handlebar grip insecure to handlebar GLUED DURING TEST (2.2.1 (d) (ii)) | 1 |
| Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii)) | 1 |
| Nearside Front All direction indicators not working (4.4.1 (a) (ii)) | 1 |
| Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Rear Brake fluid reservoir fluid level significantly below minimum level (1.1.10 (d) (ii)) | 1 |
| Rear Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
| Rear Footrest missing (6.2.12 (a)) | 1 |
| Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Offside Front Brake fluid reservoir fluid level significantly below minimum level (1.1.10 (d) (ii)) | 1 |
| Stop lamp does not illuminate by the operation of both brake controls Not working when rear brake applied (4.3.2 (a) (iii)) | 1 |
| Stop lamp not working from rear brake (4.3.1 (a) (ii)) | 1 |
| Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
| Front Wheel alignment incorrect which adversely affects the steering (2.4 (a)) | 1 |
| Front Brake lagging in operation (1.2.1 (d)) | 1 |
| Front Brake fluid significantly below minimum mark (1.1.10 (d) (ii)) | 1 |
| Rear Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
| Steering operation restricted in free movement from lock to lock movement tight (2.1.4 (c)) | 1 |
| Rear Brake pedal so insecure that the brake cannot be readily applied (1.1.2 (e) (ii)) | 1 |
| Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
| Offside Front Footrest insecure (6.2.12 (a)) | 1 |
| Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
| Registration plate issues | 1 |
| Central Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Headlamp light source and lamp not compatible (4.1.4 (c)) | 1 |
| Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
| Front Wheel spoke excessively loose (5.2.2 (d)) | 1 |
| Rear Brake caliper inadequately mounted (1.1.16 (c) (i)) | 1 |
| Horn not working (7.7 (a)) | 1 |