>

MOT History from tests of petrol SINNIS JSs year 2015

Review the list of common SINNIS JS failures below or to perform a specific mot history check on your SINNIS then use our popular KnowYourCar service

mot history
Pass percent:68.92%
(The average a petrol SINNIS JS year 2015 passes without issue)
Based on:563 MOT Tests
Most common failuresNo# failures
Headlamp aim out of alignment32
Registration plate lamp issues19
Brake hose excessively deteriorated6
Drive chain excessively loose (6.1.7 (c) (i))6
Steering headbearing has excessive wear or free play |2.2.2 |f| |i||5
Front Stop lamp not working |4.3.1 |a| |ii||5
Drive chain excessively loose |6.1.7 |c| |i||5
Registration plate issues5
Headlamp not working on dipped beam (4.1.1 (a) (ii))5
Front Position lamp not working (4.2.1 (a))5
Drive chain so loose it is likely to fail (6.1.7 (c) (ii))5
Front Stop lamp not working (4.3.1 (a) (ii))5
Drive chain worn to excess |6.1.7 |c| |i||4
Drive chain so worn it is likely to fail (6.1.7 (c) (ii))4
Horn not working (7.7 (a) (ii))4
Steering headbearing has excessive wear or free play (2.2.2 (f) (i))4
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))4
Drive chain worn to excess (6.1.7 (c) (i))4
Front Brake excessively binding (1.2.1 (f))4
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i))4
Nearside Front Direction indicator not working (4.4.1 (a) (ii))4
Drive chain excessively loose |6.2.1d|3
Horn not working |7.7 |a| |ii||3
Stop lamp not working |4.3.1 |a| |ii||3
Steering headbearing excessively stiff or notchy |2.2.2 |f| |i||3
Front Position lamp not working |4.2.1 |a||3
Front Headlamp not working on main beam |4.1.1 |a| |ii||3
Front Brake excessively binding |1.2.1 |f||3
Headlamp not working on main beam (4.1.1 (a) (ii))3
Front Headlamp not working on dipped beam (4.1.1 (a) (ii))3
Rear Brake pedal has insufficient reserve travel (1.1.2 (a))3
Front Brake lever has insufficient reserve travel (1.1.2 (a))3
Wheel alignment incorrect which adversely affects the handling (2.4 (a))3
Stop lamp does not illuminate immediately a brake applies |1.3.1a|2
Front Shock absorber has a serious fluid leak |5.3.2 |b||2
Drive chain worn to excess |6.2.1e|2
Front Headlamp not working on dipped beam |4.1.1 |a| |ii||2
All direction indicators not working |4.4.1 |a| |ii||2
Throttle operating incorrectly (6.2.7 (a) (i))2
Brake lever has insufficient reserve travel (1.1.2 (a))2
Brake hose damaged2
All direction indicators not working (4.4.1 (a) (ii))2
Rear Brake effort inadequate at a wheel (1.2.1 (a) (i))2
Handlebar fouling on the fuel tank or bodywork on full lock (2.1.4 (b))2
Front Wheel bearing has excessive play (5.1.3 (a) (i))2
Stop lamp remains on when the brakes are released2
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii))2
Horn sound not in accordance with requirements (7.7 (c))2
Horn not working (7.7 (a))2
Rear Wheel bearing has excessive play (5.1.3 (a) (i))2
Front Front position lamp does not illuminate immediately when switched on |1.1.3a|1
Rear Front position lamp does not illuminate immediately when switched on |1.1.3a|1
Front Roller brake test indicates a binding brake |3.3.A1a|1
Front shock absorber seal failed and leaking oil |2.3.3|1
Headlamp aim beam image kick up to the offside |1.6|1
Exhaust is leaking and excessively noisey |7.1.1b|1
Nearside Rear Direction indicator not working |4.4.1 |a| |ii||1
Stop lamp not working rear control |4.3.1 |a| |ii||1
Dipswitch does not deflect the main beam/s, making them into dipped beam/s Hi low wired up wrong way round |1.2.2b|ii||1
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|1
Front Fuel tank leaking |6.1.3 |b| |i||1
Nearside Rear Direction indicators not working |1.5.1c|1
Drive chain excessively tight |6.2.1d|1
Rear suspension bush has excessive free play swinging arm bushes |2.4.A2a|i||1
Rear Roller brake test indicates a severely grabbing brake |3.3.A1b|1
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride brake arm split pin missing |6.2.1h|1
Nearside Rear Drive chain excessively loose |6.2.1d|1
Stop lamp does not illuminate immediately a brake applies front control |1.3.1a|1
Stop lamp remains on when the brake is released rear lever |1.3.1e|1
Drive chain sprocket worn to excess both |6.2.1e|1
Rear Plate brake test indicates a sticking brake |3.3.B1a|1
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride chain split link |6.2.1h|1
Stop lamp does not illuminate immediately a brake applies rear brake |1.3.1a|1
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride sprocket |6.2.1h|1
Front Steering headbearing has excessive wear or free play |2.2.2 |f| |i||1
Direction indicators flashing more than 120 times per minute |1.5.1c|1
Steering movement excessively `notchy` with the wheel raised |2.2.1b|1
Front Brake component has restricted free movement and operation is likely to be impeded caliper binding to excess, restricting free rotation of wheel |3.2.A1h|1
Rear Footrest missing |6.2.12 |a||1
Rear Brake back plate insecure split pin missing |1.1.14 |d||1
Stop lamp affected by the operation of another lamp |1.3.2|1
Headlamp deteriorated and function impaired |1.2.3a|1
Steering lock stop maladjusted |2.1.3|1
Offside Front shock absorber seal failed and leaking oil fork seal |2.3.3|1
Front Front wheel bearings have excessive free play |2.3.5b|1
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a|1
Nearside Front shock absorber seal failed and leaking oil |2.3.3|1
Front Wheel bearing rough when rotated |5.1.3 |b| |i||1
Front Wheel bearing has excessive play |5.1.3 |a| |i||1
Drive chain excessively tight |6.1.7 |k| |i||1
Rear Drive chain sprocket so worn it is likely to fail |6.1.7 |c| |ii||1
Offside Rear Footrest missing |6.2.12 |a||1
Front Brake lever cannot be applied smoothly |3.1.3d|1
Front Brake lever cannot be released smoothly |3.1.3d|1
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||1
Riders seat insecure |6.2.1a|1
Nearside Front Direction indicators not working |1.5.1c|1
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|1
Front Floor brake test indicates a binding brake |3.3.C2c|1
Rear Drive chain worn to excess |6.1.7 |c| |i||1
Brake master cylinder leaking Inspection window perished and leaking |1.1.10 |b| |ii||1
Stop lamp not working With hand lever |4.3.1 |a| |ii||1
Steering operation restricted in free movement from lock to lock near side lock stop jams steering on full lock |2.1.4 |c||1
Front Direction indicator obviously incorrectly positioned Mandatory direction indicators must have minimum separation distances of: solo motorcycles over 50cc ??? 300mm at the front and 240mm at the rear |4.4.3 |a||1
Front Brake indicates excessive fluctuation of brake effort |1.2.1 |e||1
Rear Position lamp not working |4.2.1 |a||1
Headlamp lens seriously defective Full of water |4.1.1 |b| |ii||1
Nearside Footrest insecure and badly bent |6.2.12 |a||1
Footrest missing Rubber missing |6.2.12 |a||1
Nearside Front Direction indicator missing |4.4.1 |a| |ii||1
Offside Front Direction indicator missing |4.4.1 |a| |ii||1
Front Brake effort inadequate at a wheel |1.2.1 |a| |i||1
Rear Brake effort inadequate at a wheel |1.2.1 |a| |i||1
Roller brake test No brake control achieves an efficiency of 30% |1.2.2 |a| |i||1
Steering linkage locking device missing |2.1.3 |d||1
Steering operation fouling on the fuel tank or bodywork on full lock lock stop missing |2.1.4 |b||1
Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a||1
Headlamp aim not tested |4.1.2 |b||1
Headlamp not working on dipped beam |4.1.1 |a| |ii||1
Nearside Rear Direction indicator likely to become detached |4.4.1 |c| |ii||1
Riders seat insecure |6.2.5 |a| |ii||1
Nearside Handlebar grip insecure to handlebar left hand |2.2.1 |d| |ii||1
Headlamp not working on main beam |4.1.1 |a| |ii||1
Rear Brake grabbing severely |1.2.1 |c||1
Front Brake component modification unsafe front brake lever snapped leaving inadequate leverage |1.1.21 |d| |i||1
Brake excessively binding |1.2.1 |f||1
Drive chain so worn it is likely to fail |6.1.7 |c| |ii||1
Rear Brake component inadequately mounted split pin missing from brake arm |1.1.21 |c||1
Nearside Rear Footrest missing |6.2.12 |a||1
Stop lamp switch with a delay in operation |4.3.2 |a| |ii||1
Front Drive chain sprocket worn to excess |6.1.7 |c| |i||1
Front Brake caliper damaged |1.1.16 |a| |i||1
Front brake disc in such a condition that it is seriously weakened1
Rear Stop lamp not working |4.3.1 |a| |ii||1
Front Fork yoke in such a condition that steering control is adversely affected |2.2.2 |d| |ii||1
Front Fuel cap ineffective |6.1.3 |b| |i||1
Front Footrest insecure |6.2.12 |a||1
Front Riders seat insecure |6.2.5 |a| |ii||1
Rear Drive chain sprocket so loose it is likely to fail |6.1.7 |c| |ii||1
Rear Suspension component ball joint likely to become detached |5.3.4 |a| |ii||1
Offside Front Lower Brake hose leaking |1.1.12 |c||1
Brake pedal has insufficient reserve travel |1.1.2 |a||1
Front Exhaust has a major leak of exhaust gases |6.1.2 |a||1
Exhaust system insecure |6.1.2 |a||1
Offside Rear Footrest insecure |6.2.12 |a||1
Brake pedal not releasing correctly and functionality of brakes affected |1.1.2 |b| |ii||1
Nearside Front Brake hose damaged and likely to fail split |1.1.12 |a||1
Drive chain horseshoe locking device incorrectly fitted |6.1.7 |j| |i||1
Rear Brake pedal has insufficient reserve travel |1.1.2 |a||1
Headlamp aim not tested machines engine cuts out when lights are turned on |4.1.2 |b||1
Front Headlamp light intensity severely reduced (4.1.4 (a))1
Handlebar fractured to the extent that detachment is likely bends & cracks (2.2.1 (c) (ii))1
Offside Front Direction indicator likely to become detached (4.4.1 (c) (ii))1
Nearside Front Direction indicator lens defective such that the emitted light is adversely affected (4.4.1 (b) (ii))1
Direction indicator not working R/H side stuck on (4.4.1 (a) (ii))1
Brake excessively binding Front (1.2.1 (f))1
Rear Brake grabbing severely (1.2.1 (c))1
Rear Footrest missing (6.2.12 (a))1
Rear Brake drum significantly and obviously worn (1.1.14 (a) (i))1
Offside Brake lever insecure (1.1.2 (e) (i))1
Rear Drive chain excessively loose (6.1.7 (c) (i))1
Offside Footrest insecure (6.2.12 (a))1
Front Brake grabbing severely (1.2.1 (c))1
Stop lamp not working With front brake (4.3.1 (a) (ii))1
Steering operation fouling on the fuel tank or bodywork on full lock (2.1.4 (b))1
Forks fractured FORK STOPS (2.2.2 (d) (i))1
Headlamp light intensity severely reduced (4.1.4 (a))1
Front Shock absorber has negligible damping effect (5.3.2 (b))1
Stop lamp not working when operating rear brake (4.3.1 (a) (ii))1
Front Brake fluid reservoir fluid level significantly below minimum level (1.1.10 (d) (ii))1
Rear Drive chain sprocket worn to excess sprocket carrier has excessive play/ware (6.1.7 (c) (i))1
Wheel alignment incorrect which adversely affects the handling Swing arm distortion (2.4 (a))1
Headlamp insecure (4.1.1 (c))1
Rear Wheel alignment incorrect which adversely affects the handling (2.4 (a))1
Motorcycle structure is so deformed it is likely to adversely affect braking or steering (6.1.1 (a) (ii))1
Central Front Steering headbearing has excessive wear or free play (2.2.2 (f) (i))1
Rear Stop lamp switch with a delay in operation (4.3.2 (a) (ii))1
Fork yoke in such a condition that steering control is adversely affected (2.2.2 (d) (ii))1
Handlebar restricted in free movement from lock to lock (2.1.4 (c))1
Brake grabbing severely front and rear (1.2.1 (c))1
Front Brake master cylinder defective but brake still operating (1.1.10 (b) (i))1
Front Brake fluid not visible (1.1.10 (d) (iii))1
Fuel cap ineffective (6.1.3 (b) (i))1
Steering headbearing in such a condition that steering control is adversely affected (2.2.2 (f) (ii))1
Rear Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i))1
Rear Direction indicator light intensity significantly reduced (4.4.3 (a))1
Rear Drive chain excessively tight, so that it is likely to fail (6.1.7 (k) (ii))1
Rear Brake rod insecure (1.1.15 (c))1
Stop lamp does not illuminate by the operation of both brake controls Front switch not working (4.3.2 (a) (iii))1
Nearside Rear Direction indicator light intensity significantly reduced (4.4.3 (a))1
Throttle control functioning such that safe operation of the motorcycle is adversely affected throttle cable incorrectly fitted & races on O/S lock (6.2.7 (a) (ii))1
Nearside Handlebar fouling on the fuel tank or bodywork on full lock (2.1.4 (b))1
Offside Handlebar fouling on the fuel tank or bodywork on full lock (2.1.4 (b))1
Rear Rear reflector missing (4.8.2 (a) (ii))1
Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i))1
Rear Drive chain sprocket excessively loose sprocket bolts loose allowing it to move on hub (6.1.7 (c) (i))1
Front Headlamp light source and lamp not compatible headlamp fitted with incorrect bulb effecting beam pattern (4.1.4 (c))1
Front Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii))1
Brake pedal not releasing correctly and functionality of brakes affected (1.1.2 (b) (ii))1
Front Upper Steering headbearing excessively stiff or notchy (2.2.2 (f) (i))1
Front Horn not working (7.7 (a) (ii))1
Front Headlamp aim not tested (4.1.2 (b))1
Steering headbearing has excessive wear or free play top locking nut loose (2.2.2 (f) (i))1
Central Rear Stop lamp not working REAR BRAKE LIGHT NOT WORKING ON CONTROL ONE (4.3.1 (a) (ii))1
Drive chain excessively tight (6.1.7 (k) (i))1
Front Position lamp not working bulb fitted (4.2.1 (a))1
Nearside Chain guard insecure (6.1.7 (i))1
Nearside Rear Drive chain sprocket so loose it is likely to fail (6.1.7 (c) (ii))1
Central Front Headlamp aim projected beam image obviously incorrect Correct bulb fitted (4.1.2 (c))1
Central Front Steering headbearing has excessive wear or free play Adjusted (2.2.2 (f) (i))1
Stop lamp not working (4.3.1 (a) (ii))1
Nearside Front Direction indicator with a multiple light source more than 1/2 not functioning (4.4.1 (a) (ii))1
Drive chain sprocket worn to excess (6.1.7 (c) (i))1
Stop lamp not working Lever for brake light (4.3.1 (a) (ii))1
Rear Wheel spindle locking device ineffective wheel adjusters inafective (5.2.1 (d))1
Rear Footrest missing rear footrests seized (6.2.12 (a))1
Rear Stop lamp not working (4.3.1 (a) (ii))1
Nearside Front Footrest insecure (6.2.12 (a))1
Offside Front Footrest insecure (6.2.12 (a))1
Nearside Rear Footrest insecure (6.2.12 (a))1
Offside Rear Footrest missing (6.2.12 (a))1
Horn not working switch missing (7.7 (a))1
Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii))1
Rear Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii))1
Front Shock absorber has a serious fluid leak Fork seal (5.3.2 (b))1
Rear Suspension component mounting modified so the suspension is likely to fail other components Fouling exhaust (5.3.3 (c) (ii))1
Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e))1
Rear Drive chain sprocket so worn it is likely to fail (6.1.7 (c) (ii))1
Rear Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii))1
Front Brake lever has restricted free movement front brake lever knotchy when applied (1.1.15 (e))1
Front Brake lever insecure front lever has a fixing bolt missing and lose (1.1.2 (e) (i))1
Headlamp aim not tested (4.1.2 (b))1
Exhaust has a major leak of exhaust gases (6.1.2 (a))1
Rear Drive chain sprocket excessively loose (6.1.7 (c) (i))1
Rear Brake component insecure torque arm for rear brake not secure (1.1.21 (c))1
Offside Rear Direction indicator not working r/h indicators not flashing (4.4.1 (a) (ii))1
Nearside Rear Direction indicator not working (4.4.1 (a) (ii))1
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b))1
Front Headlamp insecure (4.1.1 (c))1
Offside Front Brake caliper insecurely mounted and braking performance affected Securing bush missing (1.1.16 (c) (ii))1
Front Brake performance not tested Unable to test due to insecurely mounted caliper (1.2.1 (g))1
Dipswitch does not operate immediately when selected on dipped beam (4.1.3 (b))1
Rear Drive chain sprocket worn to excess (6.1.7 (c) (i))1
Offside Rear Brake rod insecure Split pin missing (1.1.15 (c))1
Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii))1
Front Shock absorber has a serious fluid leak (5.3.2 (b))1
Direction indicator obviously incorrectly positioned (4.4.3 (a))1
Rear Brake lining(s) contaminated (1.1.13 (b))1
Exhaust system insecure (6.1.2 (a))1
Steering headbearing excessively stiff or notchy in the straight-ahead position. (2.2.2 (f) (i))1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy