Most common failures | No# failures |
---|
Registration plate lamp issues | 4 |
Parking brake lever has no reserve travel |3.1.6b| | 3 |
Brake hose excessively deteriorated | 3 |
Windscreen wiper does not clear the windscreen effectively | 3 |
Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Offside Front Steering component mounting prescribed area is excessively corroded |2.2.C.1h| | 2 |
Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
Nearside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Offside Front wheel bearing has excessive play |2.5.A.3c| | 2 |
Nearside Front Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Suspension component mounting prescribed area is excessively corroded n/s rear floor |2.4.A.3| | 1 |
Nearside Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Rear wheel cylinder leaking |3.6.A.1| | 1 |
Nearside Rear Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Brakes imbalanced across an axle | 1 |
Nearside Rear Suspension spring mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
Offside Front Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Exhaust system not adequately supported |7.1.1| | 1 |
Nearside Front Sub-frame corroded and seriously weakened |2.4.G.1| | 1 |
Offside Front wheel bearing rough when rotated |2.5.A.2| | 1 |
Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Spare wheel carrier insecure |6.4.2| | 1 |
Offside Brake rod locking device insecure |3.5.1l| | 1 |
Front Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Front Front wheel bearing rough when rotated |2.5.A.2| | 1 |
Offside Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Rear brake drum contaminated by oil |3.5.1h| | 1 |
Rear brake binding | 1 |
Nearside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Indicator tell tale inoperative |1.4.A.2a| | 1 |
Suspension component mounting prescribed area is deliberately modified which significantly reduces the original strength n/s sill to floor insufficient weld |2.4.A.3| | 1 |
Steering column top bearing excessively worn |2.1.2c| | 1 |
Parking brake mechanism/associated mounting prescribed area is excessively corroded |3.1.9| | 1 |
Registration plate issues | 1 |
Offside Rear Direction indicator not working |1.4.A.2c| | 1 |
Nearside Headlamp not working on dipped beam |1.7.5a| | 1 |
Offside Headlamp not working on dipped beam |1.7.5a| | 1 |
Nearside Headlamp not working on main beam |1.7.5a| | 1 |
Offside Headlamp not working on main beam |1.7.5a| | 1 |
Rear parking brake recording little or no effort | 1 |
Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Nearside Front Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 1 |
Offside Front Upper Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Rear brake application uneven | 1 |
Offside rear brake recording little or no effort |3.7.B.5a| | 1 |
Parking brake: efficiency below requirements |3.7.B.7| | 1 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front Direction indicator not working |1.4.A.2c| | 1 |
Service brake: efficiency below requirements |3.7.B.7| | 1 |
Nearside Front Front position lamp|s| not working |1.1.A.3b| | 1 |
Nearside Rear Direction indicator not working |1.4.A.2c| | 1 |
Nearside Front wheel bearing has excessive play |2.5.A.3c| | 1 |
Rear Mechanical brake component has restricted free movement | 1 |
Nearside Front Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
Nearside Front Headlamp not working on main beam |1.7.5a| | 1 |
Nearside Front Steering component mounting prescribed area is excessively corroded |2.2.C.1h| | 1 |