Most common failures | No# failures |
---|
Headlamp aim out of alignment | 13 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 6 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Horn not working |1.7.3a| | 3 |
Rear Rear suspension bearing has excessive free play |2.4.A2a|i|| | 3 |
Drive chain worn to excess |6.2.1e| | 3 |
Rear Footrest missing |6.2.1a| | 3 |
Drive chain excessively loose |6.2.1d| | 3 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 2 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 2 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
Registration plate issues | 2 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Front Front wheel bearings have excessive free play |2.3.5b| | 2 |
Fuel system component insecure |7.2.1b| | 2 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 2 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Rear Drive chain excessively loose |6.2.1d| | 2 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Headlamp insecure |1.2.3b| | 2 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Rear Wheel bearing play so excessive it is likely to break up |5.1.3 |a| |ii|| | 2 |
Rear Shock absorber has negligible damping effect |5.3.2 |b|| | 2 |
Direction indicators not working |1.5.1c| | 1 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
Plate brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.B2b| | 1 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Nearside Steering lock stop ineffective |2.1.3| | 1 |
Brake hose excessively deteriorated | 1 |
Front Lower Motorcycle structure cracked |6.1.1a| | 1 |
Nearside Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Offside Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Nearside Trikes, quads or pre-68 vehicles, service brake efficiency below requirements |3.7.B.7| | 1 |
Offside Rear Trikes, quads or pre-68 vehicles, service brake efficiency below requirements |3.7.C.1a| | 1 |
Handlebar insecure to the extent that steering is adversely affected nearside handle bar mounting insecure and both top mounts insecure (2.2.1 (d) (ii)) | 1 |
Stop lamp(s) not working on control 2 brake (4.3.1 (a) (ii)) | 1 |
Rear Brake pipe excessively damaged across axle (1.1.11 (c)) | 1 |
Nearside Brake fluid significantly below minimum mark on control one (1.1.10 (d) (ii)) | 1 |
Suspension arm attachment bracket/mounting insecure rear mounting for chain spring missing (5.3.3 (a) (i)) | 1 |
Front Brake pipe excessively damaged |3.2.B2a| | 1 |
Nearside Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Offside Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Rear Brake pedal cannot be applied smoothly |3.1.3d| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Wheel spoke excessively loose |4.2.1b| | 1 |
Rear suspension component loose |2.4.A.1a| | 1 |
Rear An item not tested |Manual| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
Fuel cap sealing washer torn |7.2.2c| | 1 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Nearside Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Offside Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Rear Wheel spoke cracked. |4.2.1b| | 1 |
Front Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Rear Brake cable badly frayed |3.2.A1b| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Front Wheel spoke excessively loose |4.2.1b| | 1 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Rear Brake reaction bracket securing bolt|s| missing |3.2.A1j| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Front Plate brake test indicates a binding brake |3.3.B1a| | 1 |
An item not tested |Manual| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Front Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
Rear Drive chain worn to excess |6.2.1e| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Offside Indicator switch does not operate the direction indicators on the side selected |1.5.4| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Front Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Nearside Drive chain excessively loose |6.2.1d| | 1 |
Nearside Drive chain worn to excess |6.2.1e| | 1 |
Offside Front Footrest insecure |6.2.1a| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Nearside Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Offside Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Front Brake master cylinder has a seized master cylinder pivot. |3.2.B5| | 1 |
Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |