MOT History from tests of petrol SIAMOTO FVs year 2004

Review the list of common SIAMOTO FV failures below or to perform a specific mot history check on your SIAMOTO then use our popular KnowYourCar service

mot history

Pass percent:61.36%

(The average a petrol SIAMOTO FV year 2004 passes without issue)

Based on:44 MOT Tests

Most common failures	No# failures
Headlamp aim out of alignment	3
Front Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	2
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Rear Brake lever has inadequate reserve travel \|3.1.3b\|	2
Brake hose excessively deteriorated	2
Front Roller brake test indicates a binding brake \|3.3.A1a\|	2
Front Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	1
Front Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	1
All position lamps adversely affected by the operation of another lamp \|1.1.3b\|	1
Direction indicator not working \|1.5.1c\|	1
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Front Steering headbearing has excessive free play \|2.2.2\|	1
Registration plate issues	1
Rear shock absorber seal failed and leaking oil \|2.4.A.1c\|	1
Nearside Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Offside Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Nearside Front Direction indicator incorrect colour \|1.5.1b\|	1
Offside Front Direction indicator incorrect colour \|1.5.1b\|	1
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	1
Front Headlamp aim beam image kick up to the offside \|1.6\|	1
Front Horn not working \|1.7.3a\|	1
Rear Rear wheel spindle securing nut\|s\| loose \|2.4.A.2b\|	1
Front Floor brake test indicates a sticking brake \|3.3.C2c\|	1
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort \|3.3.A1c\|	1
Rear wheel spindle securing nut\|s\| loose \|2.4.A.2b\|	1
Front Brake disc\|s\| securing bolt\|s\| loose \|3.2.A1g\|	1
Front Floor brake test indicates a binding brake \|3.3.C2c\|	1
Offside Handlebar handgrip not secure to handlebars. \|2.1.1c\|	1
Horn not working \|1.7.3a\|	1
Headlamp dipped beam affected by the operation of another lamp \|1.2.2c\|	1
Headlamp main beam affected by the operation of another lamp \|1.2.2c\|	1
Direction indicators flashing more than 120 times per minute \|1.5.1c\|	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Headlamp aim out of alignment	3
Front Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	2
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	2
Rear Brake lever has inadequate reserve travel \|3.1.3b\|	2
Brake hose excessively deteriorated	2
Front Roller brake test indicates a binding brake \|3.3.A1a\|	2
Front Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	1
Front Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	1
All position lamps adversely affected by the operation of another lamp \|1.1.3b\|	1
Direction indicator not working \|1.5.1c\|	1
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	1
Front Steering headbearing has excessive free play \|2.2.2\|	1
Registration plate issues	1
Rear shock absorber seal failed and leaking oil \|2.4.A.1c\|	1
Nearside Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Offside Front shock absorber seal failed and leaking oil \|2.3.3\|	1
Nearside Front Direction indicator incorrect colour \|1.5.1b\|	1
Offside Front Direction indicator incorrect colour \|1.5.1b\|	1
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	1
Front Headlamp aim beam image kick up to the offside \|1.6\|	1
Front Horn not working \|1.7.3a\|	1
Rear Rear wheel spindle securing nut\|s\| loose \|2.4.A.2b\|	1
Front Floor brake test indicates a sticking brake \|3.3.C2c\|	1
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort \|3.3.A1c\|	1
Rear wheel spindle securing nut\|s\| loose \|2.4.A.2b\|	1
Front Brake disc\|s\| securing bolt\|s\| loose \|3.2.A1g\|	1
Front Floor brake test indicates a binding brake \|3.3.C2c\|	1
Offside Handlebar handgrip not secure to handlebars. \|2.1.1c\|	1
Horn not working \|1.7.3a\|	1
Headlamp dipped beam affected by the operation of another lamp \|1.2.2c\|	1
Headlamp main beam affected by the operation of another lamp \|1.2.2c\|	1
Direction indicators flashing more than 120 times per minute \|1.5.1c\|	1

MOT History from tests of petrol SIAMOTO FVs year 2004

Find us on Facebook