| Most common failures | No# failures |
|---|
| Brake hose excessively deteriorated | 24 |
| Parking brake: efficiency below requirements |3.7.B.7| | 13 |
| Rear brake binding | 12 |
| Windscreen wiper does not clear the windscreen effectively | 12 |
| Rear parking brake recording little or no effort | 11 |
| Registration plate lamp issues | 9 |
| Horn not working |1.6.2a| | 7 |
| Headlamp aim out of alignment | 7 |
| Registration plate issues | 6 |
| Brakes imbalanced across an axle | 6 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 5 |
| Exhaust emits an excessive level of metered smoke for a non-turbo charged engine |7.4.B.3b| | 5 |
| Brake pedal spongy |3.3.B.1b| | 5 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 5 |
| Offside Stop lamp not working |1.2.1b| | 4 |
| Nearside Front constant velocity joint gaiter split |2.5.C.1a| | 4 |
| Nearside Front Macpherson strut has excessive movement at the upper attachment |2.5.A.1c| | 4 |
| Offside Front Macpherson strut has excessive movement at the upper attachment |2.5.A.1c| | 4 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 4 |
| Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 4 |
| Fuel pipe leaking |7.2.3| | 3 |
| Offside Front Headlamp not working on dipped beam |1.7.5a| | 3 |
| Offside Front constant velocity joint gaiter split |2.5.C.1a| | 3 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 3 |
| Nearside Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 3 |
| Driver`s seat insecure |6.2.A.1| | 3 |
| Rear Exhaust system not adequately supported |7.1.1| | 3 |
| Nearside Front brake disc excessively pitted |3.5.1h| | 3 |
| Offside Front brake disc excessively pitted |3.5.1h| | 3 |
| Nearside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 3 |
| Nearside Front Front constant velocity joint gaiter split |2.5.C.1a| | 3 |
| Nearside Front coil spring fractured |2.4.C.1a| | 3 |
| Nearside Headlamp not working on dipped beam |1.7.5a| | 3 |
| Front Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
| Rear Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
| Offside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 2 |
| Hazard warning lamps not flashing in phase, with ignition on |1.4.B.1f| | 2 |
| Offside Front Shock absorber has an excessively worn bush |2.7.4| | 2 |
| Front brake disc excessively pitted |3.5.1h| | 2 |
| Offside Rear Stop lamp not working |1.2.1b| | 2 |
| Nearside Front position lamp|s| not working |1.1.A.3b| | 2 |
| Brake pedal creeps down when held under pressure |3.3.B.1a| | 2 |
| Nearside Rear Shock absorber has negligible damping effect |2.7.5| | 2 |
| Offside Rear Shock absorber has negligible damping effect |2.7.5| | 2 |
| Brake pedal has insufficient reserve movement |3.3.A.5| | 2 |
| Offside Front coil spring fractured |2.4.C.1a| | 2 |
| Nearside Rear Stop lamp not working |1.2.1b| | 2 |
| Offside Rear fog lamp not working |1.3.2b| | 2 |
| Service brake: efficiency below requirements |3.7.B.7| | 2 |
| Windscreen washer not working | 2 |
| Offside Front Headlamp aim beam image obviously incorrect |1.8.A.1b| | 2 |
| Offside Headlamp not working on dipped beam |1.7.5a| | 2 |
| Offside Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 2 |
| Centre Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Offside Rear rear brake recording little or no effort |3.7.B.5a| | 2 |
| Rear brake application uneven | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Centre Exhaust system not adequately supported |7.1.1| | 2 |
| Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
| Offside Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Rear Shock absorber has an excessively worn bush |2.7.4| | 1 |
| Front Exhaust system not adequately supported |7.1.1| | 1 |
| Rear Brake load sensing valve linkage seized |3.6.E.3| | 1 |
| Hazard warning lamps not flashing in phase, with ignition off |1.4.B.1f| | 1 |
| Hazard warning lamps inoperative |1.4.B.1b| | 1 |
| Nearside Stop lamp not working |1.2.1b| | 1 |
| Brake load sensing valve seized |3.6.E.3| | 1 |
| Offside Rear Rear wheel bearing rough when rotated |2.6.1| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Bonnet cannot be secured in the closed position |8.4.1| | 1 |
| Nearside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
| Offside Front coil spring incomplete |2.4.C.1a| | 1 |
| Nearside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
| Front passenger seat insecure |6.2.3| | 1 |
| Nearside Rear Leaf spring has excessive side play at eye |shackle| |2.4.B.4| | 1 |
| front brake recording little or no effort |3.7.B.5a| | 1 |
| Nearside Front Shock absorber has an excessively worn bush |2.7.4| | 1 |
| Nearside Rear position lamp|s| has less than 50% of the light sources illuminating |1.1.A.3b| | 1 |
| Brake valve leaking |3.6.A.1| | 1 |
| Offside Front Lower Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
| Nearside Front wheel bearing rough when rotated |2.5.A.2| | 1 |
| Nearside Front Macpherson strut has excessive play in the sliding bush or gland |2.5.B.1b| | 1 |
| Nearside Front Macpherson strut has excessive movement in the upper support bearing assembly |2.5.B.1b| | 1 |
| Offside Front Macpherson strut has excessive movement in the upper support bearing assembly |2.5.B.1b| | 1 |
| Nearside Front coil spring incomplete |2.4.C.1a| | 1 |
| Fuel tank leaking |7.2.3| | 1 |
| Fuel cap/sealing device does not fasten securely by positive means |7.2.4b| | 1 |
| Offside Front Side repeater not working |1.4.A.2c| | 1 |
| Offside Front Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
| Offside Rear wheel bearing rough when rotated |2.6.1| | 1 |
| Offside Rear Brake hose leaking |3.6.A.1| | 1 |
| Nearside Rear Braking system leaking |3.6.A.1| | 1 |
| Nearside Front Braking system leaking |3.6.A.1| | 1 |
| Nearside Rear Service brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 1 |
| Offside Front Direction indicator not working |1.4.A.2c| | 1 |
| Offside Body has a sharp edge caused by damage |6.1.C.1| | 1 |
| Nearside Front Upper Macpherson strut has excessive movement at the upper attachment |2.5.A.1c| | 1 |
| Rear Mechanical brake component has restricted free movement | 1 |
| All direction indicators not working (4.4.1 (a) (ii)) | 1 |
| Rear fog lamp not working (4.5.1 (a) (ii)) | 1 |
| Nearside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Brake performance not tested MAJOR FUEL LEAK |1.2.1 |g|| | 1 |
| Emissions not tested MAJOR FUEL LEAK |8.2.2.2 |e|| | 1 |
| Fuel system component leaking excessively or a risk of fire |6.1.3 |b| |ii|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Front leaf spring shackle area |5.3.6 |a| |i|| | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Front leaf spring shackle area |5.3.6 |a| |i|| | 1 |
| Brake hose damaged | 1 |
| Nearside Front Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
| Front Headlamp has a product on the light source so that the light output is severely reduced |1.7.5a| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded Upper shock mount |2.4.A.3| | 1 |
| Offside Rear Shock absorber has a serious fluid leak |2.7.3| | 1 |
| Nearside Rear Shock absorber has a serious fluid leak |2.7.3| | 1 |
| Offside Front Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
| Offside Rear fog lamp not working (4.5.1 (a) (ii)) | 1 |
| Offside Rear Brake hose leaking on an air braking system (1.1.12 (c) (i)) | 1 |
| Offside Front Driver`s door cannot be opened from inside the vehicle |6.2.B.1b| | 1 |
| Nearside Front Brake pipe fouled by moving parts |3.6.B.2a| | 1 |
| Central Rear Brake hose excessively damaged |1.1.12 |b| |ii|| | 1 |
| Battery insecure |1.9.1| | 1 |
| Offside Front Prop shaft joint constant velocity boot no longer prevents the ingress of dirt |6.1.7 |g| |ii|| | 1 |
| Nearside Front Headlamp adversely affected by the operation of another lamp |1.7.5c| | 1 |
| Spare wheel carrier insecure |6.4.2| | 1 |
| Offside Front Brake pipe inadequately supported |3.6.B.1| | 1 |
| Offside Seat belt anchorage prescribed area is severely distorted |5.2.6| | 1 |
| Offside Front coil spring broken |2.4.C.1a| | 1 |
| Emissions not tested |7.4.B.1| | 1 |
| Headlamp switch missing |1.7.1| | 1 |
| Indicator switch missing |1.4.A.1| | 1 |
| Horn control missing |1.6.1| | 1 |
| Windscreen washer control missing |8.2.1a| | 1 |
| Front Windscreen wiper control missing |8.2.1a| | 1 |
| Steering wheel retaining device missing |2.1.6| | 1 |
| Rear Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
| Emissions not tested |7.0| | 1 |
| Offside Outer Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill corner |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill back area |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wing |6.1.B.2| | 1 |
| Nearside Front Front position lamp|s| has a product on the lens so it is not visible from a reasonable distance |1.1.A.3d| | 1 |
| Nearside Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Front Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 1 |
| Offside Front Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
| Exhaust mounting missing |7.1.1b| | 1 |
| Exhaust system not adequately supported |7.1.1| | 1 |
| Nearside Rear Leaf spring has excessive wear in a shackle pin and/or bush |2.4.B.2| | 1 |
| Brake load sensing valve linkage seized |3.6.E.3| | 1 |
| Offside Rear Service brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 1 |
| Nearside Front Lower Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Nearside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
| Rear Brake load sensing valve seized |3.6.E.3| | 1 |
| Offside rear brake recording little or no effort |3.7.B.5a| | 1 |
| Offside Front Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 1 |
| Nearside Side repeater not working |1.4.A.2c| | 1 |
| Nearside Rear Vehicle structure excessively corroded within 30cm of towbar mounting |6.6.6| | 1 |
| Brake pipe excessively corroded | 1 |
| Offside Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
| Brake lever excessively worn and seriously weakened |3.5.1e| | 1 |
| Fuel system component leaking |7.2.3| | 1 |
| Nearside Outer Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
| Nearside Steering system has excessive free play detected at the steering wheel |steering rack fitted| |2.2.A.1b| | 1 |
| Nearside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
| Parking brake lever has no reserve travel |3.1.6b| | 1 |
| Offside Front Shock absorber has a serious fluid leak |2.7.3| | 1 |
| Front position lamp|s| not working |1.1.A.3b| | 1 |
| Front brake disc in such a condition that it is seriously weakened | 1 |
| Offside Front All position lamps not working |1.1.A.3b| | 1 |
| Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
| Front passenger door cannot be opened from inside the vehicle |6.2.B.1b| | 1 |
| Offside Front position lamp|s| not working |1.1.A.3b| | 1 |
| brake disc in such a condition that it is seriously weakened |3.5.1i| | 1 |
| Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Leaf spring has excessive wear in an anchor pin and/or bush |2.4.B.2| | 1 |
| Offside Front Upper Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Parking brake lever, pawl mechanism pivots or their associated mountings are insecure |3.1.4b| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| rear brake recording little or no effort |3.7.B.5a| | 1 |
| Centre Windscreen wiper blade deteriorated |8.2.2| | 1 |
| Offside Rear Braking system leaking |3.6.A.1| | 1 |
| Nearside Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 1 |
| Nearside Front Lower Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |