MOT History from tests of petrol SEAT IBIZAs year 1986

Review the list of common SEAT IBIZA failures below or to perform a specific mot history check on your SEAT then use our popular KnowYourCar service

mot history

Pass percent:43.75%

(The average a petrol SEAT IBIZA year 1986 passes without issue)

Based on:16 MOT Tests

Most common failures	No# failures
Rear parking brake recording little or no effort	2
Parking brake: efficiency below requirements \|3.7.B.7\|	2
Nearside Stop lamp not working \|1.2.1b\|	2
Nearside Front Direction indicator not working \|1.4.A.2c\|	2
Hazard warning lamps not flashing in phase, with ignition off \|1.4.B.1f\|	2
Windscreen wiper does not clear the windscreen effectively	2
Nearside Rear Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	2
Offside Rear Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	2
Offside Rear rear brake recording little or no effort \|3.7.B.5a\|	2
Nearside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Exhaust emissions carbon monoxide content excessive \|7.3.B.1a\|	1
Nearside Rear position lamp\|s\| adversely affected by the operation of another lamp \|1.1.A.3f\|	1
Offside Stop lamp not working \|1.2.1b\|	1
Nearside Rear Direction indicator not working \|1.4.A.2c\|	1
Offside Front constant velocity joint gaiter split \|2.5.C.1a\|	1
Headlamp aim out of alignment	1
Rear Exhaust mounting missing \|7.1.1b\|	1
Offside Rear Direction indicator not working \|1.4.A.2c\|	1
Nearside Front Front constant velocity joint gaiter split \|2.5.C.1a\|	1
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Nearside Front Front wheel bearing rough when rotated \|2.5.A.2\|	1
Hazard warning lamps not flashing in phase, with ignition on \|1.4.B.1f\|	1
Hazard warning tell tale not working correctly \|1.4.B.1e\|	1
Centre Exhaust mounting missing \|7.1.1b\|	1
Nearside Front Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Front Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Nearside Front Brake pipe inadequately supported \|3.6.B.1\|	1
Brakes imbalanced across an axle	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Rear parking brake recording little or no effort	2
Parking brake: efficiency below requirements \|3.7.B.7\|	2
Nearside Stop lamp not working \|1.2.1b\|	2
Nearside Front Direction indicator not working \|1.4.A.2c\|	2
Hazard warning lamps not flashing in phase, with ignition off \|1.4.B.1f\|	2
Windscreen wiper does not clear the windscreen effectively	2
Nearside Rear Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	2
Offside Rear Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	2
Offside Rear rear brake recording little or no effort \|3.7.B.5a\|	2
Nearside Inner Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Exhaust emissions carbon monoxide content excessive \|7.3.B.1a\|	1
Nearside Rear position lamp\|s\| adversely affected by the operation of another lamp \|1.1.A.3f\|	1
Offside Stop lamp not working \|1.2.1b\|	1
Nearside Rear Direction indicator not working \|1.4.A.2c\|	1
Offside Front constant velocity joint gaiter split \|2.5.C.1a\|	1
Headlamp aim out of alignment	1
Rear Exhaust mounting missing \|7.1.1b\|	1
Offside Rear Direction indicator not working \|1.4.A.2c\|	1
Nearside Front Front constant velocity joint gaiter split \|2.5.C.1a\|	1
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Nearside Front Front wheel bearing rough when rotated \|2.5.A.2\|	1
Hazard warning lamps not flashing in phase, with ignition on \|1.4.B.1f\|	1
Hazard warning tell tale not working correctly \|1.4.B.1e\|	1
Centre Exhaust mounting missing \|7.1.1b\|	1
Nearside Front Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Front Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Nearside Front Brake pipe inadequately supported \|3.6.B.1\|	1
Brakes imbalanced across an axle	1

MOT History from tests of petrol SEAT IBIZAs year 1986

Find us on Facebook