| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 8 |
| Rear fog lamp not working (4.5.1 (a) (ii)) | 2 |
| Nearside Seat belt missing row seven inner seat (7.1.2 (a)) | 1 |
| Nearside Front Upper Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting box section holed / deteriorated visible from wheel arch (6.2.2 (d) (i)) | 1 |
| Offside Front Upper Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting box section holed / deteriorated visible from wheel arch (6.2.2 (d) (i)) | 1 |
| Front Lower Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting box sections holed marked in silver (6.2.2 (d) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting box sections marked in silver (6.2.2 (d) (i)) | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting box sections marked in silver (6.2.2 (d) (i)) | 1 |
| Nearside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced inner wheel arch / flooring within seat belt mounting (7.1.1 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength box sections within suspension mounting (5.3.6 (a) (i)) | 1 |
| Windscreen wiper does not clear the windscreen effectively | 1 |
| Offside Window not made of safety glass or safety glazing window 1 (3.2 (e)) | 1 |
| Nearside Window not made of safety glass or safety glazing window 2 (3.2 (e)) | 1 |
| Offside Window not made of safety glass or safety glazing window 2 hopper (3.2 (e)) | 1 |
| Central Rear Window not made of safety glass or safety glazing (3.2 (e)) | 1 |
| Nearside Window not made of safety glass or safety glazing window 4 (3.2 (e)) | 1 |
| Nearside Window not made of safety glass or safety glazing window 5 (3.2 (e)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting marked in yellow (6.2.2 (d) (i)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting marked in yellow (6.2.2 (d) (i)) | 1 |
| Offside Rear Seat belt not functioning as intended final row inner seat - belt not retracting (7.1.2 (c)) | 1 |
| Exhaust has a major leak of exhaust gases before silencer (6.1.2 (a)) | 1 |
| Speedometer cannot be illuminated (7.8 (c) (ii)) | 1 |
| Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced front to rear box section - marked in yellow (6.1.1 (c) (i)) | 1 |
| Nearside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Headlamp not working on main beam suspect faulty switch (4.1.1 (a) (ii)) | 1 |
| Headlamp aim projected beam image is obviously incorrect OS & NS aim not tested (4.1.2 (c)) | 1 |
| Vehicle structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired various places (6.2.2 (d) (ii)) | 1 |
| Nearside Obligatory mirror insecure (3.3 (b) (ii)) | 1 |
| Offside Obligatory mirror insecure (3.3 (b) (ii)) | 1 |
| Floor insecure CENTRE WOODEN (6.2.4 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength BUMP STOP BRACKET (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area is inadequately repaired FRONT CENTRE FLOOR BOX FILLED WITH SILICONE (5.3.6 (a) (i)) | 1 |
| Nearside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting next to tank (6.2.2 (d) (i)) | 1 |
| Central Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting cross member (6.2.2 (d) (i)) | 1 |
| Nearside Front Upper Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting above front wheel (6.2.2 (d) (i)) | 1 |
| Offside Rear Upper Body component damaged and likely to cause injury floor not hanging over cross member (6.2.1 (a) (i)) | 1 |
| Service brake efficiency below requirements (1.2.2 (a) (i)) | 1 |
| Offside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting next to tank (6.2.2 (d) (i)) | 1 |
| Offside Rear Suspension bellows leaking airbag front (5.3.5 (c)) | 1 |
| Nearside Rear Upper Body component damaged and likely to cause injury floor not hanging over cross member (6.2.1 (a) (i)) | 1 |
| Offside Front Upper Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting above front wheel (6.2.2 (d) (i)) | 1 |
| Nearside Front Air brake cylinder/actuator excessively corroded (1.1.16 (d) (i)) | 1 |
| Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 1 |
| Rear Bumper insecure bumper loose (6.1.4 (a) (i)) | 1 |
| Nearside Front Axle king pin is loose in the axle beam (5.1.2 (d) (i)) | 1 |
| Offside Front Axle king pin is loose in the axle beam (5.1.2 (d) (i)) | 1 |
| Fluid leak harmful to the environment or a risk to other road users coolant leak , broken hose clip (repaired) (8.4.1 (a) (i)) | 1 |
| Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 1 |
| Position lamp switch does not operate in accordance with the requirements (4.2.2 (a)) | 1 |
| Rear Braking system leaking (1.1.3 (d)) | 1 |
| Nearside Passengers seat insecure 4th row (6.2.6 (a) (ii)) | 1 |
| Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced cross member heavily corroded near suspension air bags (6.1.1 (c) (i)) | 1 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced sub chassis out rig heavily corroded (6.1.1 (c) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis corroding (6.1.1 (c) (i)) | 1 |
| Offside Drag link end ball joint has excessive play rear ball joint (2.1.3 (b) (i)) | 1 |
| Offside Drag link end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt front ball joint (2.1.3 (g) (ii)) | 1 |
| Offside Seat belt not functioning as intended 1st row (7.1.2 (c)) | 1 |
| Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |