Most common failures | No# failures |
---|
Headlamp aim out of alignment | 49 |
Drive chain excessively loose |6.2.1d| | 19 |
Front wheel bearings are excessively rough |2.3.5b| | 19 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 17 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 16 |
Registration plate issues | 14 |
Drive chain worn to excess |6.2.1e| | 12 |
Front wheel bearings have excessive free play |2.3.5b| | 11 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 11 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 11 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 10 |
Riders seat insecure |6.2.1a| | 10 |
Rear Footrest missing |6.2.1a| | 10 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 9 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 8 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 8 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 7 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 7 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 7 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 6 |
Offside Rear Footrest missing |6.2.1a| | 6 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 6 |
Drive chain excessively tight |6.2.1d| | 6 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 6 |
Rear reflector on motorcycle missing |1.4.1| | 6 |
Horn not working |1.7.3a| | 6 |
Nearside Rear Direction indicators not working |1.5.1c| | 5 |
Nearside Rear Footrest missing |6.2.1a| | 5 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 5 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 5 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 5 |
Brake pedal has inadequate reserve travel |3.1.3b| | 5 |
Fairings insecure and likely to impede the steering |2.1.2e| | 4 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 4 |
Nearside Front Direction indicator not working |1.5.1c| | 4 |
Offside Front Direction indicator not working |1.5.1c| | 4 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 4 |
Headlamp aim beam image kick up to the offside |1.6| | 4 |
Drive chain sprocket carrier worn to excess |6.2.1e| | 4 |
Offside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 4 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 4 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 4 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 4 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 4 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 3 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 3 |
Rear Drive chain excessively loose |6.2.1d| | 3 |
Headlamp incorrect colour |1.2.1| | 3 |
Rear Drive chain sprocket carrier worn to excess |6.2.1e| | 3 |
Front Front wheel bearings have excessive free play |2.3.5b| | 3 |
Nearside Front Direction indicators not working |1.5.1c| | 3 |
Rear Rear reflector on motorcycle missing |1.4.1| | 3 |
Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 3 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Brake pedal is bent and the brake cannot be readily applied |3.1.3c| | 2 |
Nearside Front Footrest insecure |6.2.1a| | 2 |
Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 2 |
Rear Hydraulic brake control feels spongy |3.1.4a| | 2 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 2 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Rear Brake master cylinder fluid level dangerously low |3.2.B1d| | 2 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 2 |
Front Headlamp incorrect colour |1.2.1| | 2 |
Front Headlamp aim beam image kick up to the offside |1.6| | 2 |
Headlamp insecure |1.2.3b| | 2 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 2 |
Rear Brake disc|s| excessively scored |3.2.A1l| | 2 |
Nearside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 2 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 2 |
Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 2 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Offside Rear Direction indicator incorrect colour |1.5.1b| | 2 |
Offside Rear Direction indicator insecure |1.5.3b| | 2 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Rear Position lamp not working (4.2.1 (a)) | 2 |
Offside Headlamp aim beam image kick up to the offside |1.6| | 2 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
Rear Brake locking device insecure |3.2.A1e| | 2 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 2 |
Rear Drive chain worn to excess |6.2.1e| | 2 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
Offside Front Footrest insecure |6.2.1a| | 2 |
Offside Handlebar deformed |2.1.1b| | 2 |
Direction indicator missing |1.5.1a| | 2 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Fuel system component leaking |7.2.1a| | 2 |
Drive chain fouling another component |6.2.1d| | 2 |
Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 2 |
Front suspension has inadequate damping effect. |2.3.6c| | 2 |
Nearside Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Rear wheel spindle loose |2.4.A.2b| | 1 |
Headlamp switch insecure |1.2.4| | 1 |
Indicator switch insecure |1.5.4| | 1 |
Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
Steering operation impeded by a fairing |2.1.4 |e|| | 1 |
Nearside Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Offside Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Nearside Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Offside Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Nearside Handlebar handgrip missing |2.1.1c| | 1 |
Offside Handlebar handgrip missing |2.1.1c| | 1 |
Nearside Handlebar deformed |2.1.1b| | 1 |
Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Offside Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Offside Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Offside Front Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 1 |
Nearside Front Clutch lever shortened so it cannot be readily operated. |6.2.1g| | 1 |
Front Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Drive chain sprocket worn to excess |6.2.1e| | 1 |
Brake pedal is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
Hydraulic brake control feels spongy |3.1.4a| | 1 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Lower Drive chain excessively loose |6.2.1d| | 1 |
Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Steering lock stop ineffective |2.1.3| | 1 |
Rear Brake hose excessively kinked |3.2.B3a| | 1 |
Front Front suspension assembly component excessively misaligned |2.3.1| | 1 |
Front Brake locking device insecure |3.2.A1e| | 1 |
Nearside Drive chain sprocket worn to excess |6.2.1e| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Rear Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Throttle operating incorrectly revs up on right turn (6.2.7 (a) (i)) | 1 |
Rear Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Front Direction indicator not working |1.5.1c| | 1 |
Rear Direction indicator not working |1.5.1c| | 1 |
Nearside Rear Drive chain worn to excess |6.2.1e| | 1 |
Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Offside Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Rear Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Front Headlamp aim beam image too far to the right |1.6.4| | 1 |
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
Nearside Rear Direction indicator insecure |1.5.3b| | 1 |
Rear Direction indicators not working |1.5.1c| | 1 |
Offside Rear Direction indicator damaged and function impaired |1.5.3a| | 1 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Rear Wheel bearing play so excessive it is likely to break up |5.1.3 |a| |ii|| | 1 |
Front Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Rear Brake performance not tested |3.3| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Offside Direction indicators not working |1.5.1c| | 1 |
Rear Rear wheel spindle loose |2.4.A.2b| | 1 |
Offside Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Offside Front Direction indicator insecure |1.5.3b| | 1 |
Offside Rear Brake disc|s| excessively scored |3.2.A1l| | 1 |
Offside Rear Brake pedal is inoperative |3.1.3c| | 1 |
Offside Front Footrest missing |6.2.1a| | 1 |
Nearside Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Offside Rear Chain guard insecure |6.2.1c| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
Front Brake excessively binding (1.2.1 (f)) | 1 |
Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Rear Stop lamp not working Brake lamp does not illuminate when control 1 is used (brake lever). (4.3.1 (a) (ii)) | 1 |
Headlamp aim not tested (4.1.2 (b)) | 1 |
Centre Front Front position lamp missing |1.1.1a| | 1 |
Nearside Outer Front Upper Fairings so located that it is likely to impede the steering |2.1.2e| | 1 |
Centre Rear Upper All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Offside Front Upper Direction indicators not working |1.5.1c| | 1 |
Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Offside Front Brake hose excessively twisted |3.2.B3a| | 1 |
Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Front Direction indicators not working |1.5.1c| | 1 |
Centre Front Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
Nearside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Offside Front Stop lamp switch with a delay in operation |4.3.2 |a| |ii|| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Rear Exhaust mounting missing |7.1.1c| | 1 |
Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Nearside Front Indicator switch insecure |1.5.4| | 1 |
Rear Direction indicator insecure |1.5.3b| | 1 |
Rear Seat insecure |6.2.1a| | 1 |
Nearside Rear Fuel tank leaking |7.2.1a| | 1 |
Fuel cap sealing washer deteriorated |7.2.2c| | 1 |
Nearside Indicator switch insecure |1.5.4| | 1 |
Fuel cap does not fasten securely by a positive means |7.2.2b| | 1 |
Front Brake pipe union leaking fluid |3.2.B4| | 1 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Rear suspension component excessively bent |2.4.A.1a| | 1 |
Rear suspension component cracked |2.4.A.1a| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Handlebar mounting clamp bolt missing |2.1.1a| | 1 |
Exhaust mounting missing |7.1.1c| | 1 |
Front Direction indicator obscured |1.5.1a| | 1 |
Rear Brake pedal is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Registration plate lamp issues | 1 |
Nearside Rear Direction indicator damaged and function impaired |1.5.3a| | 1 |
Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Front Direction indicator missing |1.5.1a| | 1 |
Rear Direction indicator missing |1.5.1a| | 1 |
Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
Nearside Headlamp aim beam image kick up to the offside |1.6| | 1 |
Nearside Front Direction indicator incorrect colour |1.5.1b| | 1 |
Offside Front Direction indicator incorrect colour |1.5.1b| | 1 |
Rear position lamp insecure |1.1.1c| | 1 |
Offside Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Rear Brake pedal is bent and the brake cannot be readily applied (1.1.2 (d)) | 1 |
Stop lamp remains on when the brakes are released | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Lower Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Indicator tell tale not functioning |1.5.2| | 1 |
Rear Brake pedal is inoperative |3.1.3c| | 1 |
Footrest missing |6.2.1a| | 1 |
Rear Brake pipe union leaking fluid |3.2.B4| | 1 |
Fuel pipe leaking at fuel filter |7.2.1a| | 1 |
Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Plate brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.B2b| | 1 |
Front Brake lever attachment screws loose |3.1.2b| | 1 |
Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Horn is not continous or uniform |1.7.3c| | 1 |
Direction indicator not working |1.5.1c| | 1 |
Shock absorber likely to become detached (5.3.2 (a) (ii)) | 1 |
Front Handlebar deformed |2.1.1b| | 1 |
Headlamp aim not tested |1.6| | 1 |
An item not tested |Manual| | 1 |
Offside Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Offside Footrest missing |6.2.1a| | 1 |
Nearside Front Direction indicator insecure |1.5.3b| | 1 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Front Brake component has an inadequate repair |3.1.5| | 1 |
Rear Brake hose fouling |3.2.B3b| | 1 |
Front Fairing insecure and likely to impede the steering |2.1.2e| | 1 |
Fuel pipe leaking |7.2.1a| | 1 |
Nearside Front Direction indicator missing |1.5.1a| | 1 |
Front Brake component is excessively corroded |3.1.5| | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Rear Brake linkage has abnormal movement due to maladjustment |3.2.A1i| | 1 |
Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |