| Most common failures | No# failures |
|---|
| Rear Brake lever has inadequate reserve travel |3.1.3b| | 22 |
| Horn not working |1.7.3a| | 21 |
| Riders seat insecure |6.2.1a| | 14 |
| Steering headbearing has excessive free play |2.2.2| | 14 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 13 |
| Headlamp aim out of alignment | 9 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 8 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 7 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 7 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 7 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 7 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
| Rear wheel has a loose wheel nut|s| |4.2.3a| | 5 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 5 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 5 |
| Direction indicators not working |1.5.1c| | 4 |
| Registration plate issues | 4 |
| Rear reflector on motorcycle missing |1.4.1| | 4 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 3 |
| Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 3 |
| Brake lever has inadequate reserve travel |3.1.3b| | 3 |
| Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 3 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
| Horn not working (7.7 (a) (ii)) | 2 |
| Stop lamp not working (4.3.1 (a) (ii)) | 2 |
| All direction indicators not working (4.4.1 (a) (ii)) | 2 |
| Headlamp aim not tested |1.6| | 2 |
| An item not tested |Manual| | 2 |
| Nearside Brake lever has inadequate reserve travel |3.1.3b| | 2 |
| Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Front wheel bearings have excessive free play |2.3.5b| | 2 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
| Front Wheel has an excessively distorted bead rim. |4.2.2| | 2 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
| Front Steering headbearing has excessive free play |2.2.2| | 2 |
| Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 2 |
| Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 2 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 2 |
| Registration plate lamp issues | 2 |
| Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
| Nearside Front Direction indicators not working |1.5.1c| | 2 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
| Handlebar mounting clamp loose |2.1.1a| | 2 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
| Front Horn not working |1.7.3a| | 1 |
| Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Headlamp switch faulty (1.2.4) | 1 |
| Headlamp aim not tested (1.6) | 1 |
| Handlebar mounting clamp loose (2.1.1a) | 1 |
| Rear Brake lever is inoperative |3.1.3c| | 1 |
| Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Upper Steering headbearing has excessive free play |2.2.2| | 1 |
| Lower Steering headbearing has excessive free play |2.2.2| | 1 |
| Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
| Throttle operating incorrectly |6.2.1f| | 1 |
| Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Offside Front Direction indicator missing |1.5.1a| | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
| Offside Front Direction indicator insecure |1.5.3b| | 1 |
| Decelerometer brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
| Headlamp light intensity severely reduced (4.1.4 (a)) | 1 |
| Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a)) | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
| Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Nearside Brake lever mounting insecure |3.1.2a| | 1 |
| Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Rear Gradient brake test indicates a binding brake |3.3.D1c| | 1 |
| Headlamp incorrect colour |1.2.1| | 1 |
| Rear Gradient brake test indicates a severely grabbing brake |3.3.D1d| | 1 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Centre Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Nearside Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
| Position lamp switch faulty |1.1.4a| | 1 |
| Position lamp switch insecure L/H |1.1.4b| | 1 |
| Brake disc|s| has excessive run out front |3.2.A1m| | 1 |
| Offside Position lamp switch insecure |1.1.4b| | 1 |
| Nearside Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Rear Brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 1 |
| Rear Brake lever pivot has excessive free play (1.1.1 (b)) | 1 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Position lamp switch insecure |1.1.4b| | 1 |
| Indicator switch insecure |1.5.4| | 1 |
| Rear Brake lever insecure |3.1.2a| | 1 |
| Nearside Front Front shock absorber seal failed and leaking oil stauntion corroded /pitted |2.3.3| | 1 |
| Fuel system component leaking |7.2.1a| | 1 |
| Front Brake lever is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
| Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
| Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
| Front Brake component leaking fluid |3.2.B4| | 1 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
| Rear Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
| Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii)) | 1 |
| Throttle operating incorrectly (6.2.7 (a) (i)) | 1 |
| Headlamp aim not tested (4.1.2 (b)) | 1 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
| Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
| Indicator switch defective |1.5.4| | 1 |
| Headlamp switch insecure |1.2.4| | 1 |
| Front Riders seat insecure |6.2.1a| | 1 |
| Offside Rear Footrest missing |6.2.1a| | 1 |
| Rear Brake lever pivots excessively worn |3.1.3a| | 1 |
| Nearside Direction indicator not working |1.5.1c| | 1 |
| Front Upper Steering headbearing has excessive free play |2.2.2| | 1 |
| Front Lower Steering headbearing has excessive free play |2.2.2| | 1 |
| Nearside Front Front suspension assembly component loose |2.3.1| | 1 |
| Offside Front Front suspension assembly component loose |2.3.1| | 1 |
| Nearside Front position lamp incorrect colour |1.1.2a| | 1 |
| Offside Front position lamp incorrect colour |1.1.2a| | 1 |
| Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Throttle operating incorrectly moving throttle but not moving engine speed |6.2.1f| | 1 |
| Nearside Rear Direction indicators not working |1.5.1c| | 1 |
| Offside Front Direction indicators not working |1.5.1c| | 1 |
| Indicator switch does not operate the direction indicators on the side selected |1.5.4| | 1 |
| Horn control not functioning. |1.7.2b| | 1 |
| All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
| Nearside Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Front Front wheel bearings are excessively tight |2.3.5b| | 1 |
| Front Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 1 |
| Rear Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
| Front Brake disc significantly and obviously worn |1.1.14 |a| |i|| | 1 |
| Horn not working |7.7 |a| |ii|| | 1 |
| Headlamp switch faulty |1.2.4| | 1 |
| Horn sounds harsh or grating |1.7.3c| | 1 |
| Nearside Direction indicators not working both |1.5.1c| | 1 |
| Offside Direction indicators not working both |1.5.1c| | 1 |
| Stop lamp emits other than a steady red light |1.3.1b| | 1 |
| Riders seat insecure does not lock into rear clasp |6.2.1a| | 1 |
| Front Direction indicator not working |1.5.1c| | 1 |
| Motorcycle structure excessively damaged |6.1.1a| | 1 |
| Rear position lamp damaged and function impaired |1.1.1b| | 1 |
| Offside Rear Direction indicator damaged and function impaired |1.5.3a| | 1 |
| Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
| Rear Lower Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Rear Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
| Nearside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
| Nearside Front Direction indicator incorrect colour |1.5.1b| | 1 |
| Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
| Rear reflector on motorcycle damaged and function impaired |1.4.2a| | 1 |
| Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
| All direction indicators not working |4.4.1 |a| |ii|| | 1 |
| Front Brake excessively binding |1.2.1 |f|| | 1 |
| Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Front Wheel alignment incorrect which adversely affects the handling (2.4 (a)) | 1 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Nearside Front Front suspension assembly component excessively corroded. |2.3.1| | 1 |
| Offside Front Front suspension assembly component excessively corroded. |2.3.1| | 1 |
| Rear position lamp incorrect colour |1.1.2b| | 1 |
| Exhaust mounting missing |7.1.1c| | 1 |
| Inner Front Horn not working |1.7.3a| | 1 |
| Offside Front Position lamp switch faulty |1.1.4a| | 1 |
| Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Direction indicator not working |1.5.1c| | 1 |