Most common failures | No# failures |
---|
Rear reflector on motorcycle missing |1.4.1| | 19 |
Headlamp aim out of alignment | 13 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 9 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 8 |
Registration plate issues | 7 |
Drive chain excessively loose |6.2.1d| | 6 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 4 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 4 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
Horn not working |1.7.3a| | 3 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 3 |
Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
Headlamp main beam affected by the operation of another lamp |1.2.2c| | 3 |
Offside Front Direction indicator incorrect colour |1.5.1b| | 3 |
Stop lamp affected by the operation of another lamp |1.3.2| | 3 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 2 |
Nearside Rear Direction indicators not working |1.5.1c| | 2 |
Offside Rear Footrest missing |6.2.1a| | 2 |
Nearside Front Direction indicator incorrect colour |1.5.1b| | 2 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Nearside Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 2 |
Nearside Rear Direction indicator not working |1.5.1c| | 2 |
Horn is not a constant note |1.7.3c| | 2 |
Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 2 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 2 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 2 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 2 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 2 |
Nearside Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
Nearside Rear Direction indicator insecure |1.5.3b| | 1 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Rear reflector on sidecar missing |1.4.1| | 1 |
Stop lamp emits other than a steady red light |1.3.1b| | 1 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Nearside Front Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Offside Front Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Nearside Rear Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Offside Rear Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Rear suspension has a fracture of a load bearing member or its supporting structure. |2.4.A.2d| | 1 |
Rear Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Brake pedal mounting insecure |3.1.2a| | 1 |
Offside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Nearside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Rear Rear position lamp incorrect colour |1.1.2b| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Offside Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Offside Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Rear Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Rear Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
Front wheel spindle loose |2.3.3a| | 1 |
Front Wheel damaged significantly reducing the original strength |4.2.1a| | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Front Brake excessively binding |1.2.1 |f|| | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Stop lamp remains on when the brakes are released | 1 |
Drive chain excessively tight (6.1.7 (k) (i)) | 1 |
Nearside Fuel hose leaking at filter |7.2.1a| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Drive chain excessively tight |6.2.1d| | 1 |
Headlamp dipped beam affected by the operation of the horn |1.2.2c| | 1 |
Headlamp main beam affected by the operation of the horn |1.2.2c| | 1 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Front Drive chain sprocket worn to excess |6.2.1e| | 1 |
Rear Brake locking device missing |3.2.A1e| | 1 |
Drive chain worn to excess |6.2.1e| | 1 |
Centre Rear Upper Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Nearside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
Position lamp switch insecure |1.1.4b| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Offside Front Lower Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 1 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
Rear Position lamp adversely affected by the operation of another lamp |4.2.3 |b|| | 1 |
Rear Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
Handlebar deformed |2.1.1b| | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
An item not tested |Manual| | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Nearside Rear Footrest missing |6.2.1a| | 1 |
Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Fuel cap mounting flange/sealing method defective |7.2.2c| | 1 |
Nearside Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Offside Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Offside Footrest insecure |6.2.1a| | 1 |
Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Rear Chain guard insecure |6.2.1c| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Rear Footrest missing (6.2.12 (a)) | 1 |
Central Front Lower Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
Front Direction indicators not working Both |1.5.1c| | 1 |
Rear Direction indicators not working Both |1.5.1c| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Front Headlamp aim not tested |1.6| | 1 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |