Most common failures | No# failures |
---|
Headlamp aim out of alignment | 49 |
Parking brake: efficiency below requirements |3.7.B.7| | 33 |
Registration plate lamp issues | 28 |
Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 22 |
Horn not working |1.6.2a| | 21 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 21 |
Rear parking brake recording little or no effort | 19 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 18 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 18 |
Brakes imbalanced across an axle | 17 |
Brake hose excessively deteriorated | 16 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 16 |
Offside front brake binding |3.7.B.1| | 12 |
Service brake: efficiency below requirements |3.7.B.7| | 12 |
Offside Headlamp not working on dipped beam |1.7.5a| | 11 |
Front passenger door cannot be opened from outside the vehicle |6.2.B.1b| | 11 |
Rear brake binding | 8 |
Offside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 8 |
Nearside front brake binding |3.7.B.1| | 8 |
Battery insecure |1.9.1| | 8 |
Offside rear brake recording little or no effort |3.7.B.5a| | 7 |
Nearside Front constant velocity joint gaiter split |2.5.C.1a| | 7 |
Nearside rear brake recording little or no effort |3.7.B.5a| | 7 |
Nearside Headlamp not working on dipped beam |1.7.5a| | 7 |
Nearside Steering rack gaiter split |2.2.D.2d| | 7 |
Registration plate issues | 7 |
Offside Steering rack gaiter split |2.2.D.2d| | 7 |
Windscreen wiper does not clear the windscreen effectively | 6 |
Horn not loud enough to be heard by another road user |1.6.2b| | 6 |
Rear Exhaust has a major leak of exhaust gases |7.1.2| | 6 |
Exhaust emissions hydrocarbon content excessive |7.3.B.1b| | 5 |
Offside Front position lamp|s| not working |1.1.A.3b| | 5 |
Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 5 |
Parking brake lever has no reserve travel |3.1.6b| | 5 |
Exhaust has a major leak of exhaust gases |7.1.2| | 5 |
Exhaust system not adequately supported |7.1.1| | 5 |
Rear brake application uneven | 4 |
Nearside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 4 |
Nearside Front Steering rack gaiter split |2.2.D.2d| | 4 |
Brake pipe excessively corroded | 4 |
Nearside Front Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 4 |
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 4 |
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 4 |
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 4 |
Windscreen washer not working | 4 |
Stop lamp not working |1.2.1b| | 4 |
Offside Front wheel bearing rough when rotated |2.5.A.2| | 3 |
Offside Front constant velocity joint gaiter split |2.5.C.1a| | 3 |
Offside Front Track rod end ball joint has excessive play |2.2.B.1f| | 3 |
Offside Front Direction indicator not working |1.4.A.2c| | 3 |
Nearside Track rod end ball joint has excessive play |2.2.B.1f| | 3 |
Offside Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 3 |
Nearside Front Front suspension has excessive play in a upper suspension ball joint |2.5.B.1a| | 3 |
Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Nearside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 3 |
Driver`s door cannot be opened from outside the vehicle |6.2.B.1b| | 3 |
Offside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Nearside Rear rear brake recording little or no effort |3.7.B.5a| | 3 |
Offside Front Upper Suspension arm has excessive play in a ball joint |2.4.G.2| | 3 |
Offside Rear rear brake recording little or no effort |3.7.B.5a| | 3 |
Offside Front Headlamp not working on main beam |1.7.5a| | 3 |
Offside Front Steering rack gaiter split |2.2.D.2d| | 3 |
Service brake efficiency below requirements (1.2.2 (a) (i)) | 3 |
Nearside Stop lamp not working |1.2.1b| | 3 |
Nearside Rear Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Offside Front front brake binding |3.7.B.1| | 2 |
Nearside Steering rack gaiter insecure |2.2.D.2d| | 2 |
Headlamp aim not tested |1.8.A.1c| | 2 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 2 |
Front Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
Emissions not tested |7.3.A.1| | 2 |
Nearside Front Direction indicator not working |1.4.A.2c| | 2 |
Nearside Rear Direction indicator not working |1.4.A.2c| | 2 |
Front brake disc in such a condition that it is seriously weakened | 2 |
Direction indicators not working |1.4.A.2c| | 2 |
Offside Headlamp not working on main beam |1.7.5a| | 2 |
Rear Exhaust has part of the system excessively deteriorated |7.1.1a| | 2 |
Offside Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 2 |
Centre Exhaust system not adequately supported |7.1.1| | 2 |
Rear Exhaust system not adequately supported |7.1.1| | 2 |
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Nearside Front Headlamp not working on dipped beam |1.7.5a| | 2 |
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Nearside Front Upper Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Offside Front Upper Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Nearside Front Front constant velocity joint gaiter split |2.5.C.1a| | 2 |
Nearside Front Upper Suspension arm has excessive play in a ball joint |2.4.G.2| | 2 |
Nearside Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 2 |
Brake hose damaged | 2 |
Offside Front Service brake excessively binding |1.2.1 |f|| | 2 |
Indicator switch faulty |1.4.A.1| | 2 |
Horn not working |7.7 |a| |ii|| | 2 |
Nearside Front Front position lamp|s| not working |1.1.A.3b| | 2 |
Parking brake efficiency below requirements (1.4.2 (a) (i)) | 2 |
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
Offside Inner Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Front brake application uneven | 2 |
Nearside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Mechanical brake component has restricted free movement | 2 |
Offside Front Shock absorber has an excessively worn bush |2.7.4| | 2 |
Nearside Headlamp aim not tested |1.8.A.1c| | 2 |
Offside Front Lower Suspension arm has excessive play in a ball joint |2.4.G.2| | 2 |
Offside Rear wheel bearing has excessive play |2.6.2| | 2 |
Offside Rear Braking system leaking |3.6.A.1| | 2 |
Brake servo leaking |3.6.C.1c| | 1 |
Offside Headlamp insecure |1.7.3| | 1 |
Steering rack gaiter insecure |2.2.D.2d| | 1 |
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
Brake hydraulic reservoir fluid level below minimum level |3.6.G.1b| | 1 |
Nearside Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front Lower Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Nearside Front Mechanical brake component locking device insecure |3.5.1l| | 1 |
Nearside Front Battery insecure |1.9.1| | 1 |
Nearside Windscreen wiper not operating automatically when switched on |8.2.1b| | 1 |
Offside Windscreen wiper not operating automatically when switched on |8.2.1b| | 1 |
Offside Rear Body has a sharp edge caused by damage |6.1.C.1| | 1 |
Nearside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Nearside Front Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Offside Front Driver`s seat fore and aft adjustment mechanism not functioning as intended. |6.2.A.3| | 1 |
Offside Front Driver`s seat insecure |6.2.A.1| | 1 |
Dipswitch operation does not extinguish all main beam headlamps leaving at least one pair of dipped beam headlamps |1.7.4b| | 1 |
Nearside Electrical wiring inadequately supported dash |1.9.2a| | 1 |
Centre Electrical wiring inadequately supported dash |1.9.2a| | 1 |
Offside Electrical wiring inadequately supported dash |1.9.2a| | 1 |
Offside Electrical wiring inadequately supported |1.9.2a| | 1 |
Front Exhaust system not adequately supported |7.1.1| | 1 |
Nearside Front Driver`s door cannot be opened from outside the vehicle |6.2.B.1b| | 1 |
Offside Front Driver`s door cannot be opened from outside the vehicle |6.2.B.1b| | 1 |
Front front parking brake recording little or no effort |3.7.B.6a| | 1 |
Nearside Front Direction indicators incorrect colour |1.4.A.2f| | 1 |
Offside Front Direction indicators incorrect colour |1.4.A.2f| | 1 |
Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement |7.2.4b| | 1 |
Offside Front Front wheel bearing rough when rotated |2.5.A.2| | 1 |
Nearside Rear Upper Coil spring mounting damaged and seriously weakened |2.4.C.3c| | 1 |
Nearside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Nearside Rear Suspension arm attachment bracket/mounting fractured |2.4.G.1| | 1 |
Nearside Rear Suspension arm attachment bracket/mounting corroded and its strength is seriously reduced |2.4.G.1| | 1 |
Nearside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Outer Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Rear Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear Suspension component mounting prescribed area is excessively corroded 2 places |2.4.A.3| | 1 |
Offside Rear Suspension component mounting prescribed area is excessively corroded upper shock absorber mounting |2.4.A.3| | 1 |
Nearside Parking brake mechanism/associated mounting prescribed area is excessively corroded Centre floor |3.1.9| | 1 |
Nearside Rear Seat belt anchorage prescribed area is excessively corroded inner wheel arch |5.2.6| | 1 |
Windscreen wiper not operating automatically when switched on |8.2.1b| | 1 |
Exhaust emits dense blue smoke at idle |7.3.A.2b| | 1 |
Nearside Front Front passenger door cannot be opened from outside the vehicle |6.2.B.1b| | 1 |
Steering system excessively tight |2.2.D.1| | 1 |
Nearside Front Steering system fouling |2.2.D.2a| | 1 |
Offside Front Front suspension has excessive play in a upper suspension ball joint |2.5.B.1a| | 1 |
front brake binding |3.7.B.1| | 1 |
Offside Front Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
Nearside Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Front Brake hose excessively damaged |3.6.B.4d| | 1 |
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Rear Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear Stop lamp(s) adversely affected by the operation of another lamp (4.3.3 (b)) | 1 |
Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Offside Rear Rear position lamp|s| not working |1.1.A.3b| | 1 |
Offside Front Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Nearside Rear Direction indicator adversely affected by the operation of another lamp (4.4.3 (b)) | 1 |
Front Service brake excessively binding (1.2.1 (f)) | 1 |
Nearside Rear Stop lamp not working |1.2.1b| | 1 |
Offside Front Stop lamp not working |1.2.1b| | 1 |
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Front Upper Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Offside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Rear Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings boot floor n/s and o/s |6.1.B.2| | 1 |
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis corroded |6.1.B.2| | 1 |
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis corroded |6.1.B.2| | 1 |
Nearside Front passenger door cannot be opened from outside the vehicle |6.2.B.1b| | 1 |
Nearside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Rear Parking brake lever has no reserve travel |3.1.6b| | 1 |
Offside Outer Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Inner Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front Upper Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Nearside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Offside Front Suspension component mounting prescribed area is excessively corroded corroded in two places on the floor pan |2.4.A.3| | 1 |
Indicator tell tale inoperative |1.4.A.2a| | 1 |
Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone `A` |8.3.1b| | 1 |
Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 1 |
Nearside Front Upper Steering locking device insecure |2.2.C.1g| | 1 |
Nearside Front Upper Steering locking device missing |2.2.C.1g| | 1 |
Position lamp switch faulty |1.1.A.1| | 1 |
All position lamps not working |1.1.A.3b| | 1 |
Nearside Front Headlamp aim not tested |1.8.A.1c| | 1 |
Offside Front Headlamp aim not tested |1.8.A.1c| | 1 |
Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Centre Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear Passenger`s seat cannot be secured in the upright position. |6.2.A.2| | 1 |
Nearside Rear Upper Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Front Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Front Steering rack gaiter insecure |2.2.D.2d| | 1 |
Nearside Front Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Front Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Front Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Rear Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
Nearside Front Headlamp not working on main beam |1.7.5a| | 1 |
Nearside Outer Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Rear engine mounting deteriorated resulting in excessive movement |6.1.D.1a| | 1 |
Nearside Front Suspension component mounting prescribed area is excessively corroded floor and bulkhead |2.4.A.3| | 1 |
Offside Front Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength scuttle/bulkhead |5.3.6 |a| |i|| | 1 |
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength scuttle/bulkhead |5.3.6 |a| |i|| | 1 |
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floorpan |5.3.6 |a| |i|| | 1 |
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch/floor |5.3.6 |a| |i|| | 1 |
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill/jacking point |5.3.6 |a| |i|| | 1 |
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch/inner wing |5.3.6 |a| |i|| | 1 |
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch |5.3.6 |a| |i|| | 1 |
Front passenger door cannot be opened from outside the vehicle |6.2.3 |a|| | 1 |
Nearside Rear Lower Shock absorbers has an excessively worn bush |5.3.2 |c|| | 1 |
Offside Rear Lower Shock absorbers has an excessively worn bush |5.3.2 |c|| | 1 |
Nearside Rear Service brake has no recorded effort at a wheel |1.2.1 |a| |ii|| | 1 |
Service brake efficiency less than 50% of the required value |1.2.2 |a| |ii|| | 1 |
Parking brake efficiency less than 50% of the required value |1.4.2 |a| |ii|| | 1 |
Rear Stop lamp not working |1.2.1b| | 1 |
Offside Steering rack insecure |2.2.B.1a| | 1 |
Nearside Front Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Fuel system component leaking |7.2.3| | 1 |
Rear Brake cable has wires broken and is significantly weakened |3.5.1b| | 1 |
Central Exhaust system not adequately supported mountings |7.1.1| | 1 |
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings jacking point area |6.1.B.2| | 1 |
Rear rear brake recording little or no effort |3.7.B.5a| | 1 |
Nearside Shock absorber has an excessively worn bush |2.7.4| | 1 |
Nearside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
Body insecure and dangerous to other road users |6.1.B.1b| | 1 |
Nearside Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Offside Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Windscreen wiper not working |3.4 |a|| | 1 |
Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing area |5.3.6 |a| |i|| | 1 |
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill as marked/rear inner sill end as marked |5.3.6 |a| |i|| | 1 |
Front passenger door cannot be opened from outside the vehicle (6.2.3 (a)) | 1 |
Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |
Exhaust emissions - engine idle speed too high (8.2.1.2 (e)) | 1 |
Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b)) | 1 |
Service brake has no recorded effort at a wheel os and ns rear footbrake no effort recorded (1.2.1 (a) (ii)) | 1 |
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) | 1 |
Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Wheel arch- within 30cm of suspension mounting (6.1.1 (c) (i)) | 1 |
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Floor pan within 30cm of front suspension mounting (6.1.1 (c) (i)) | 1 |
rear brakes release unevenly |3.7.B.4| | 1 |
Nearside Front Suspension component mounting prescribed area is deliberately modified which significantly reduces the original strength |2.4.A.3| | 1 |
Nearside Front Windscreen wiper not operating automatically when switched on |8.2.1b| | 1 |
Offside Front Windscreen wiper not operating automatically when switched on |8.2.1b| | 1 |
Offside Front Brake hose bulging under pressure |3.6.B.3| | 1 |
Offside Steering rack gaiter insecure |2.2.D.2d| | 1 |
Steering wheel locking device insecure |2.1.6| | 1 |
Offside Rear Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
Offside Outer Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
Nearside Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i)) | 1 |
Offside Rear position lamp|s| not working |1.1.A.3b| | 1 |
Offside Front constant velocity joint is insecure |2.5.C.1b| | 1 |
Nearside Rear Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
Offside Front Seat belt anchorage prescribed area is severely distorted |5.2.6| | 1 |
Nearside Front suspension has excessive play in a upper suspension ball joint |2.5.B.1a| | 1 |
Offside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Seat belt anchorage prescribed area is inadequately repaired |5.2.6| | 1 |
Nearside Rear Shock absorber has a serious fluid leak |2.7.3| | 1 |
Offside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
Nearside Front Shock absorber has an excessively worn bush |2.7.4| | 1 |
Offside Front suspension has excessive play in a upper suspension ball joint |2.5.B.1a| | 1 |
Nearside Rear Coil spring not correctly located |2.4.C.2| | 1 |
Nearside Front Headlamp insecure |1.7.3| | 1 |
Offside Front Suspension component mounting prescribed area is excessively corroded inner wind support bracket area |2.4.A.3| | 1 |
Nearside Front Suspension spring mounting prescribed area is excessively corroded inner arch near top of spring area |2.4.A.3| | 1 |
Offside Rear Inner Seat belt anchorage prescribed area is excessively corroded wheel arch area |5.2.6| | 1 |
Nearside Rear Inner Seat belt anchorage prescribed area is excessively corroded arch area is excessively corroded |5.2.6| | 1 |
Offside Front Suspension spring mounting prescribed area is excessively corroded floor area |2.4.A.3| | 1 |
Nearside Rear Suspension spring mounting prescribed area is excessively corroded floor area |2.4.A.3| | 1 |
Exhaust emits visible black smoke at idle |7.3.A.2b| | 1 |
Exhaust has a part missing |7.1.1a| | 1 |
Nearside Headlamp not working on main beam |1.7.5a| | 1 |
Tailgate cannot be secured in the closed position |6.4.1| | 1 |
Brake pedal has insufficient reserve movement |3.3.A.5| | 1 |
Offside Front Lower Vehicle structure is fractured and structural rigidity is significantly reduced (6.1.1 (a) (i)) | 1 |
Offside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Offside Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a| | 1 |
Offside Rear rear brake juddering severely |3.7.A.5b| | 1 |
Nearside Rear Hydraulic brake cylinder leaking hydraulic fluid |3.6.A.1| | 1 |
Front passenger seat insecure |6.2.3| | 1 |
Horn sounds harsh or grating |1.6.2e| | 1 |
Parking brake efficiency below requirements |1.4.2 |a| |i|| | 1 |
Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a| | 1 |
Nearside Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Steering rack gaiter split |2.2.D.2d| | 1 |
Nearside Inner Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
Nearside Rear Rear wheel bearing rough when rotated |2.6.1| | 1 |
Direction indicators flashing more than 120 times a minute |1.4.A.2g| | 1 |
Nearside Rear Brake clevis joint locking device missing |3.5.1l| | 1 |
Nearside Front An item not tested |Manual| | 1 |
Offside Front An item not tested |Manual| | 1 |
Offside Rear All position lamps not working |1.1.A.3b| | 1 |
Offside Rear Trailing arm attachment bracket/mounting corroded and its strength is seriously reduced |2.4.G.1| | 1 |
Rear Shock absorber has a serious fluid leak both |2.7.3| | 1 |
Nearside Front Suspension component mounting prescribed area is excessively corroded jacking point |2.4.A.3| | 1 |
Offside Front Suspension component mounting prescribed area is excessively corroded jacking point |2.4.A.3| | 1 |
Nearside Outer Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Offside Outer Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Front front brake binding |3.7.B.1| | 1 |
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis holed beside front suspension |6.1.B.2| | 1 |
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis holed beside anti-roll bar |6.1.B.2| | 1 |
Nearside Front Front suspension has a suspension lower ball joint securing nut not locked |2.5.B.1a| | 1 |
Bonnet cannot be secured in the closed position |8.4.1| | 1 |
Front Windscreen wiper not operating automatically when switched on |8.2.1b| | 1 |
Nearside Front front brake binding |3.7.B.1| | 1 |
Front Service brake excessively fluctuating |1.2.1 |e|| | 1 |
Nearside Front Hydraulic brake calliper leaking and braking performance affected |1.1.16 |b| |ii|| | 1 |
Nearside Front Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
Offside Rear Coil spring not correctly located |2.4.C.2| | 1 |
Offside Front Brake hose excessively damaged |3.6.B.4d| | 1 |
Nearside Front Direction indicator incorrect colour |1.4.A.2f| | 1 |
Offside Front Direction indicator incorrect colour |1.4.A.2f| | 1 |
Offside Seat belt anchorage prescribed area is excessively corroded outersill |5.2.6| | 1 |
Offside Front Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
Nearside Rear Braking system leaking |3.6.A.1| | 1 |
Offside Rear Suspension component mounting prescribed area is excessively corroded at front of inner wheel arch |sill end| |2.4.A.3| | 1 |
Offside Front Brake hose twisted |3.6.B.4c| | 1 |
Offside Front Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Offside Front brake caliper leaking |3.6.A.1| | 1 |
Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i|| | 1 |
Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Sill panel & floor by seat belt mounting |6.1.B.2| | 1 |
Nearside Rear Statutory seat belt missing |5.1.1| | 1 |
Offside Statutory seat belt missing |5.1.1| | 1 |