>

MOT History from tests of petrol SAAB 93s year 1997

Review the list of common SAAB 93 failures below or to perform a specific mot history check on your SAAB then use our popular KnowYourCar service

mot history
Pass percent:63.40%
(The average a petrol SAAB 93 year 1997 passes without issue)
Based on:153 MOT Tests
Most common failuresNo# failures
Registration plate lamp issues14
Windscreen wiper does not clear the windscreen effectively12
Parking brake: efficiency below requirements |3.7.B.7|11
Rear parking brake recording little or no effort10
Headlamp aim out of alignment9
Brake hose excessively deteriorated8
Brake pipe excessively corroded8
Offside Front position lamp|s| not working |1.1.A.3b|6
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits |7.3.D.3|5
Nearside Front position lamp|s| not working |1.1.A.3b|5
Exhaust has a major leak of exhaust gases |7.1.2|5
Rear brake disc in such a condition that it is seriously weakened4
Registration plate issues3
Offside Front coil spring incomplete |2.4.C.1a|3
Rear Exhaust has a major leak of exhaust gases |7.1.2|3
Nearside Front Front position lamp|s| not working |1.1.A.3b|3
Parking brake lever has no reserve travel |3.1.6b|2
Brakes imbalanced across an axle2
Mechanical brake component has restricted free movement2
Nearside Headlamp not working on dipped beam |1.7.5a|2
Nearside Headlamp not working on main beam |1.7.5a|2
Offside Headlamp not working on main beam |1.7.5a|2
Fuel system component insecure |7.2.1|2
Emissions not tested |7.0|2
Offside Stop lamp not working |1.2.1b|2
Service brake: efficiency below requirements |3.7.B.7|2
Steering column top bearing excessively worn |2.1.2c|2
Centre Exhaust has a major leak of exhaust gases |7.1.2|2
Nearside Rear rear brake recording little or no effort |3.7.B.5a|2
Rear brake binding2
Offside Front Service brake excessively binding (1.2.1 (f))1
Offside Side repeater not working (4.4.1 (a) (ii))1
Parking brake efficiency below requirements (1.4.2 (a) (i))1
Offside Front Suspension arm has excessive play in a pin/bush |2.4.G.2|1
Nearside Front Suspension arm has excessive play in a pin/bush |2.4.G.2|1
Nearside Front constant velocity joint gaiter split |2.5.C.1a|1
Nearside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2|1
Offside Rear Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2|1
Anti-lock braking system warning lamp indicates an ABS fault1
Headlamp switch faulty |1.7.1|1
Rear An item not tested |Manual|1
Nearside Rear Body has a projection caused by corrosion |6.1.C.1|1
Nearside Front Side repeater not working |1.4.A.2c|1
Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition |7.1.4|1
Fuel cap/sealing device mounting flange/sealing method defective |7.2.4c|1
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|1
Offside Rear Upper Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|1
Offside Front Body has a projection caused by corrosion |6.1.C.1|1
Offside Rear Brake cable has wires broken and is significantly weakened |3.5.1b|1
Nearside Rear Body has a sharp edge caused by corrosion quatter |6.1.C.1|1
Exhaust emissions hydrocarbon content after 2nd fast idle excessive |7.3.D.3|1
Exhaust emissions carbon monoxide content after 2nd fast idle excessive |7.3.D.3|1
Exhaust emits excessive dense blue smoke during acceleration |7.3.A.2c|1
Nearside Front coil spring incomplete |2.4.C.1a|1
Rear Exhaust has part of the system excessively deteriorated |7.1.1a|1
Offside Front Side repeater not working |1.4.A.2c|1
Offside Headlamp not working on dipped beam |1.7.5a|1
Rear Exhaust has a part missing |7.1.1a|1
Offside Inner Front Subframe mounting prescribed area is excessively corroded |2.4.A.3|1
Rear brake application uneven1
Nearside Stop lamp not working |1.2.1b|1
Brake hose has insufficient room to move1
Nearside Front Front constant velocity joint gaiter split |2.5.C.1a|1
Exhaust has part of the system excessively deteriorated |7.1.1a|1
Exhaust system not adequately supported |7.1.1|1
Offside Front coil spring fractured |2.4.C.1a|1
Rear Exhaust mounting missing |7.1.1b|1
Fuel tank leaking |7.2.3|1
Nearside Rear Brake pipe inadequately clipped |3.6.B.1|1
Offside Front Suspension arm has excessive play in a ball joint |2.4.G.2|1
Nearside Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a|1
Nearside rear brake juddering severely |3.7.A.5b|1
Offside rear brake juddering severely |3.7.A.5b|1
Nearside Front Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a|1
Nearside Front Shock absorber has a serious fluid leak |2.7.3|1
Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2|1
Nearside rear brake recording little or no effort |3.7.B.5a|1
Centre Exhaust has part of the system excessively deteriorated |7.1.1a|1
Offside rear brake recording little or no effort |3.7.B.5a|1
Nearside Front Macpherson strut corroded and seriously weakened |2.4.G.1|1
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3|1
Nearside Front Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a|1
Centre Exhaust system not adequately supported |7.1.1|1
Front Exhaust has a major leak of exhaust gases cracked before the cat |7.1.2|1
Emissions not tested |7.3.A.1|1
Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings hole near subframe mounting point |6.1.B.2|1
Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings large hole near seat base |6.1.B.2|1
Offside Front Seat belt anchorage prescribed area is excessively corroded floor pan |5.2.6|1
Exhaust has a part missing |7.1.1a|1
Rear Service brake indicates brake bind |3.7.D.2a|1
Nearside Front Service brake excessively binding (1.2.1 (f))1
Nearside Front Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2|1
Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement |7.2.4b|1
Front Headlamp has a product on the lens so that the light output is severely reduced |1.7.5a|1
Steering rack damaged and unserviceable |2.2.C.1d|1
Nearside Rear Direction indicator incorrect colour |1.4.A.2f|1
Offside Rear Direction indicator incorrect colour |1.4.A.2f|1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy