| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 36 |
| Registration plate issues | 29 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 19 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 17 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 14 |
| Horn not working |1.7.3a| | 14 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 14 |
| Rear reflector on motorcycle missing |1.4.1| | 11 |
| Drive chain excessively loose |6.2.1d| | 10 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 10 |
| Rear Position lamp not working (4.2.1 (a)) | 10 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 8 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 8 |
| Stop lamp remains on when the brakes are released | 7 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 6 |
| Nearside Footrest insecure |6.2.1a| | 6 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 6 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 5 |
| Drive chain worn to excess |6.2.1e| | 4 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 4 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 4 |
| Offside Footrest insecure |6.2.1a| | 4 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 4 |
| Front Brake excessively binding (1.2.1 (f)) | 4 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Fuel system component leaking |7.2.1a| | 3 |
| Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 3 |
| Headlamp aim beam image kick up to the offside |1.6| | 3 |
| Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 3 |
| Horn not working (7.7 (a) (ii)) | 3 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 3 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 3 |
| Offside Front Direction indicators not working |1.5.1c| | 2 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
| Throttle operating incorrectly |6.2.1f| | 2 |
| Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 2 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
| Front Stop lamp remains on when the brake is released |1.3.1e| | 2 |
| Horn not working |7.7 |a| |ii|| | 2 |
| Offside Front Direction indicator not working |1.5.1c| | 2 |
| Steering headbearing has excessive free play |2.2.2| | 2 |
| Front Horn not working |1.7.3a| | 2 |
| Rear Stop lamp not working |4.3.1 |a| |ii|| | 2 |
| Offside Rear Direction indicator not working |1.5.1c| | 2 |
| Nearside Rear Direction indicator not working |1.5.1c| | 2 |
| Drive chain excessively tight |6.2.1d| | 2 |
| Rear Position lamp not working |4.2.1 |a|| | 2 |
| Stop lamp not working |4.3.1 |a| |ii|| | 2 |
| Rear Rear reflector missing (4.8.2 (a) (ii)) | 2 |
| Headlamp aim not tested (4.1.2 (b)) | 2 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
| Drive chain excessively loose (6.1.7 (c) (i)) | 2 |
| Rear reflector missing (4.8.2 (a) (ii)) | 2 |
| Stop lamp not working (4.3.1 (a) (ii)) | 2 |
| Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 2 |
| Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 2 |
| Front position lamp does not illuminate immediately when switched on high beam not working new bulb fitted |1.1.3a| | 1 |
| Offside Position lamp switch insecure |1.1.4b| | 1 |
| Brake pedal not releasing correctly and functionality of brakes affected |1.1.2 |b| |ii|| | 1 |
| An item not tested |Manual| | 1 |
| Rear Brake pedal has insufficient reserve travel |1.1.2 |a|| | 1 |
| Headlamp damaged and function impaired |1.2.3a| | 1 |
| Fuel pipe leaking |7.2.1a| | 1 |
| Steering control handlebar movement restricted by taut cables |2.1.2c| | 1 |
| Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Rear position lamp does not illuminate immediately when it is switched on tail light |1.1.3a| | 1 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Front Front position lamp flickers when tapped lightly by hand |1.1.3c| | 1 |
| Rear Front position lamp flickers when tapped lightly by hand |1.1.3c| | 1 |
| Footrest insecure |6.2.1a| | 1 |
| Offside Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
| Leg shield so located that it is likely to impede the steering |2.1.2e| | 1 |
| Nearside Rear Direction indicators not working |1.5.1c| | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 1 |
| Rear wheel spindle loose |2.4.A.2b| | 1 |
| Rear Wheel spoke missing |4.2.1b| | 1 |
| Front Sidecar front position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Horn sounds harsh or grating |1.7.3c| | 1 |
| Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
| Offside Front Footrest insecure |6.2.1a| | 1 |
| Stop lamp not working foot |4.3.1 |a| |ii|| | 1 |
| Rear Wheel fixing missing |multiple fixings| pin missing |5.2.1 |a| |i|| | 1 |
| Steering control has Insufficient clearance at full lock affecting the riders operation of the controls |2.1.2b| | 1 |
| Drive chain worn to excess |6.1.7 |c| |i|| | 1 |
| Chain guard insecure |6.2.1c| | 1 |
| Horn control not readily accesible. |1.7.2a| | 1 |
| Brake pedal cannot be applied smoothly |3.1.3d| | 1 |
| Headlamp incorrect colour |1.2.1| | 1 |
| Nearside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
| Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
| Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
| Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
| Rear position lamp insecure |1.1.1c| | 1 |
| Horn sound not in accordance with requirements |7.7 |c|| | 1 |
| Drive chain excessively tight |6.1.7 |k| |i|| | 1 |
| Nearside Front Direction indicator not working |1.5.1c| | 1 |
| Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
| Rear Brake pedal insecure |3.1.2a| | 1 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Headlamp aim not tested |1.6| | 1 |
| Rear Brake locking device missing |3.2.A1e| | 1 |
| Rear Brake pedal cannot be released smoothly |3.1.3d| | 1 |
| Front Direction indicators not working |1.5.1c| | 1 |
| Rear Direction indicators not working |1.5.1c| | 1 |
| Rear Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
| Nearside Rear Footrest missing |6.2.1a| | 1 |
| Nearside Direction indicators not working |1.5.1c| | 1 |
| Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Horn control not functioning. |1.7.2b| | 1 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
| Front Plate brake test indicates a binding brake |3.3.B1a| | 1 |
| Rear Plate brake test indicates a sticking brake |3.3.B1a| | 1 |
| Rear suspension component loose |2.4.A.1a| | 1 |
| Fuel system component leaking fuel tap |6.1.3 |b| |i|| | 1 |
| Fuel system component insecure |7.2.1b| | 1 |
| Brake linkage has abnormal movement due to maladjustment |3.2.A1i| | 1 |
| Rear Stop lamp missing |1.3.3a| | 1 |
| Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
| Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Fuel cap sealing washer torn |7.2.2c| | 1 |
| Nearside Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Nearside Front Indicator switch insecure |1.5.4| | 1 |
| Rear Drive chain excessively loose |6.2.1d| | 1 |
| Front position lamp deteriorated and function impaired |1.1.1b| | 1 |
| Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
| Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Nearside Front Footrest insecure |6.2.1a| | 1 |
| Front Brake back plate|s| securing bolt|s| loose |3.2.A1j| | 1 |
| Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
| Steering operation fouling on the fuel tank or bodywork on full lock |2.1.4 |b|| | 1 |
| Front Brake excessively binding |1.2.1 |f|| | 1 |
| Stop lamp damaged and function impaired lights up but goes out when brake applied |1.3.3a| | 1 |
| Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Nearside Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
| Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
| Nearside Front Direction indicators not working |1.5.1c| | 1 |
| Position lamp switch insecure |1.1.4b| | 1 |
| Direction indicator not working |1.5.1c| | 1 |
| Headlamp switch insecure |1.2.4| | 1 |
| Offside Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
| Offside Rear Stop lamp switch with a delay in operation |4.3.2 |a| |ii|| | 1 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
| Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Front Throttle operating incorrectly |6.2.1f| | 1 |
| Brake lever mounting insecure |3.1.2a| | 1 |
| Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Centre Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Offside Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Stop lamp does not illuminate immediately a brake applies Front Control |1.3.1a| | 1 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Exhaust excessively deteriorated |7.1.1a| | 1 |
| Front Front wheel spindle loose |2.3.5a| | 1 |
| Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Front wheel spindle securing nut locking device insecure |2.3.5a| | 1 |
| Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Central Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Rear Brake excessively binding (1.2.1 (f)) | 1 |
| Rear Brake drum contaminated brake cleaned out possibly chain lube contamination (1.1.14 (b)) | 1 |
| Throttle operating incorrectly (6.2.7 (a) (i)) | 1 |
| Central Rear Upper Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
| Stop lamp showing white light to the rear (4.3.3 (a) (ii)) | 1 |
| Headlamp incorrect colour (4.1.4 (a)) | 1 |
| Brake pedal insecure (1.1.2 (e) (i)) | 1 |
| Wheel alignment incorrect which adversely affects the handling on rear wheel adjusters? (2.4 (a)) | 1 |
| Front Brake pivot has restricted free movement (1.1.15 (e)) | 1 |
| Rear Wheel spoke excessively loose spokes loose (5.2.2 (d)) | 1 |
| Handlebar mounting insecure (2.2.1 (a) (i)) | 1 |
| Rear Wheel spoke excessively loose Broken spoke (5.2.2 (d)) | 1 |
| Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
| Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| All position lamps not working (4.2.1 (a)) | 1 |
| Rear Brake rod insecure brake anchor bolt loose (1.1.15 (c)) | 1 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Rear Wheel spoke excessively loose broken (5.2.2 (d)) | 1 |
| Horn sound not in accordance with requirements (7.7 (c)) | 1 |
| Drive chain worn to excess (6.1.7 (c) (i)) | 1 |
| Rear Drive chain sprocket worn to excess (6.1.7 (c) (i)) | 1 |
| Rear Wheel spindle locking device missing (5.2.1 (d)) | 1 |
| Drive chain so worn it is likely to fail (6.1.7 (c) (ii)) | 1 |
| Drive chain excessively tight, so that it is likely to fail (6.1.7 (k) (ii)) | 1 |
| Brake performance not tested (1.2.1 (g)) | 1 |
| Fuel system component leaking (6.1.3 (b) (i)) | 1 |
| Rear Wheel spoke missing (5.2.2 (d)) | 1 |
| Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii)) | 1 |
| Registration plate lamp issues | 1 |
| Stop lamp does not illuminate by the operation of both brake controls not working with rear brake pedal (4.3.2 (a) (iii)) | 1 |
| Central Front Handlebar mounting insecure (2.2.1 (a) (i)) | 1 |
| Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
| Rear Position lamp adversely affected by the operation of another lamp (4.2.3 (b)) | 1 |
| Position lamp not working Earth connection cleaned. (4.2.1 (a)) | 1 |
| Stop lamp not working Earth connection cleaned. (4.3.1 (a) (ii)) | 1 |
| Front Stop lamp not working lever (4.3.1 (a) (ii)) | 1 |
| Rear Stop lamp not working lever (4.3.1 (a) (ii)) | 1 |
| Headlamp aim unable to be tested (4.1.2 (b)) | 1 |
| Nearside Steering operation fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 1 |
| Offside Steering operation fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 1 |
| Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
| Fuel hose leaking (6.1.3 (b) (i)) | 1 |
| Rear Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 1 |
| Central Rear Lower Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Central Rear Lower Position lamp not working (4.2.1 (a)) | 1 |
| Stop lamp adversely affected by the operation of another lamp malfunction with position light. (4.3.3 (b)) | 1 |
| Position lamp adversely affected by the operation of another lamp malfunction with stop light. (4.2.3 (b)) | 1 |
| Rear Wheel alignment incorrect which adversely affects the steering (2.4 (a)) | 1 |
| All direction indicators not working (4.4.1 (a) (ii)) | 1 |
| Front Steering linkage component insecure (2.1.3 (a) (i)) | 1 |
| Nearside Front Brake drum insecure (1.1.14 (a) (ii)) | 1 |
| Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Front All direction indicators obviously incorrectly positioned should be 225mm apart (4.4.3 (a)) | 1 |
| Nearside Handlebar restricted in free movement from lock to lock (2.1.4 (c)) | 1 |
| Offside Handlebar restricted in free movement from lock to lock (2.1.4 (c)) | 1 |
| Front Brake caliper damaged (1.1.16 (a) (i)) | 1 |