| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 80 |
| Registration plate issues | 44 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 29 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 25 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 20 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 19 |
| Horn not working |1.7.3a| | 14 |
| Rear reflector on motorcycle missing |1.4.1| | 12 |
| Drive chain excessively loose |6.2.1d| | 11 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 10 |
| Rear Position lamp not working (4.2.1 (a)) | 9 |
| Stop lamp remains on when the brake is released |1.3.1e| | 7 |
| Stop lamp affected by the operation of another lamp |1.3.2| | 7 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 7 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 7 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
| Front Stop lamp remains on when the brake is released |1.3.1e| | 6 |
| Rear Wheel spoke cracked. |4.2.1b| | 5 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 5 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 5 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 5 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 5 |
| Footrest insecure |6.2.1a| | 4 |
| Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 4 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 4 |
| Offside Rear Direction indicators not working |1.5.1c| | 4 |
| Front Roller brake test indicates a sticking brake |3.3.A1a| | 4 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 4 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 4 |
| Rear reflector missing (4.8.2 (a) (ii)) | 4 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 4 |
| Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 3 |
| Rear Wheel spoke excessively loose |4.2.1b| | 3 |
| Fuel cap sealing washer missing |7.2.2c| | 3 |
| Nearside Footrest insecure |6.2.1a| | 3 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 3 |
| Offside Front Footrest insecure |6.2.1a| | 3 |
| Nearside Front Footrest insecure |6.2.1a| | 3 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
| Nearside Rear Direction indicator not working |1.5.1c| | 3 |
| Riders seat insecure |6.2.1a| | 3 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 3 |
| Direction indicators not working |1.5.1c| | 3 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 3 |
| Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 3 |
| Drive chain worn to excess |6.2.1e| | 3 |
| Stop lamp not working (4.3.1 (a) (ii)) | 3 |
| Fuel cap leaking (6.1.3 (b) (i)) | 3 |
| Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 3 |
| Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 2 |
| Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
| Direction indicators flashing more than 120 times per minute |1.5.1c| | 2 |
| Offside Rear Direction indicator insecure |1.5.3b| | 2 |
| Front Horn not working |1.7.3a| | 2 |
| Throttle operating incorrectly |6.2.1f| | 2 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 2 |
| Rear Wheel spoke missing |4.2.1b| | 2 |
| Front Footrest insecure |6.2.1a| | 2 |
| Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 2 |
| Fuel system component insecure |7.2.1b| | 2 |
| Fuel cap sealing washer deteriorated |7.2.2c| | 2 |
| Front Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Offside Front Direction indicator not working |1.5.1c| | 2 |
| Offside Front Direction indicators not working |1.5.1c| | 2 |
| Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
| Headlamp aim beam image kick up to the offside |1.6| | 2 |
| Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 2 |
| Rear position lamp incorrect colour |1.1.2b| | 2 |
| Stop lamp emits other than a steady red light |1.3.1b| | 2 |
| Headlamp switch faulty |1.2.4| | 2 |
| Nearside Rear Direction indicators not working |1.5.1c| | 2 |
| Rear Drive chain worn to excess |6.2.1e| | 2 |
| Rear Drive chain excessively loose |6.2.1d| | 2 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 2 |
| Rear All position lamps do not illuminate immediately when switched on |1.1.3a| | 2 |
| Headlamp not working on main beam |4.1.1 |a| |ii|| | 2 |
| Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 2 |
| Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 2 |
| Horn is not a constant note |1.7.3c| | 2 |
| Stop lamp remains on when the brakes are released | 2 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
| Horn not working (7.7 (a) (ii)) | 2 |
| Rear position lamp does not illuminate immediately when it is switched on (1.1.3a) | 2 |
| Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a) | 2 |
| Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
| Horn sound not in accordance with requirements (7.7 (c)) | 2 |
| Rear Rear reflector missing (4.8.2 (a) (ii)) | 2 |
| Drive chain excessively loose (6.1.7 (c) (i)) | 2 |
| Rear Drive chain sprocket worn to excess (6.1.7 (c) (i)) | 2 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 2 |