>

MOT History from tests of petrol ROYAL ENFIELD BULLETs year 1993

Review the list of common ROYAL ENFIELD BULLET failures below or to perform a specific mot history check on your ROYAL ENFIELD then use our popular KnowYourCar service

mot history
Pass percent:86.91%
(The average a petrol ROYAL ENFIELD BULLET year 1993 passes without issue)
Based on:527 MOT Tests
Most common failuresNo# failures
Registration plate issues10
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|5
Headlamp aim out of alignment5
Headlamp dipped beam affected by the operation of another lamp |1.2.2c|4
Stop lamp does not illuminate immediately a brake applies |1.3.1a|4
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|3
Rear reflector on motorcycle missing |1.4.1|3
Throttle operating incorrectly |6.2.1f|3
Horn control not functioning. |1.7.2b|2
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c|2
Handlebar mounting clamp bolt loose |2.1.1a|2
Horn not working |1.7.3a|2
Steering headbearing has excessive free play |2.2.2|2
Front Stop lamp does not emit a steady light |1.3.1b|2
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1|2
Nearside Headlamp switch insecure |1.2.4|1
Front Headlamp dipped beam affected by the operation of another lamp |1.2.2c|1
Headlamp main beam affected by the operation of another lamp |1.2.2c|1
Direction indicators flashing more than 120 times per minute |1.5.1c|1
Drive chain worn to excess |6.2.1e|1
Rear Wheel spindle loose |5.2.1 |c| |i||1
Riders seat missing |6.2.1a|1
Front position lamp does not illuminate immediately when switched on |1.1.3a|1
Rear Direction indicator affected by the operation of another lamp |1.5.1c|1
Rear Stop lamp affected by the operation of another lamp |1.3.2|1
Horn is not a constant note |1.7.3c|1
Front Stop lamp missing |1.3.3a|1
Rear Rear reflector on motorcycle obscured |1.4.2b|1
Rear Rear position lamp deteriorated and function impaired |1.1.1b|1
Nearside Front Direction indicator not working |4.4.1 |a| |ii||1
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a|1
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b|1
Offside Rear Direction indicators not working |1.5.1c|1
Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c|1
Front Roller brake test indicates a severely juddering brake |3.3.A1b|1
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|1
Rear Brake pedal has inadequate reserve travel |3.1.3b|1
Fuel system component leaking |7.2.1a|1
Headlamp aim so that beam "kick up" is not visible on the screen |1.6.B.1|1
Front Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c|1
Headlamp dipped beam flickers when tapped lightly by hand |1.2.2c|1
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|1
Rear Roller brake test indicates a severely grabbing brake |3.3.A1b|1
Wheel alignment incorrect which adversely affects the handling |2.5.1|1
Drive chain excessively tight |6.2.1d|1
Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j|1
Brake lever attachment screws loose |3.1.2b|1
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h|1
Centre Front Lower Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c|1
Handlebar mounting insecure |2.2.1 |a| |i||1
Front Upper Steering headbearing has excessive wear or free play |2.2.2 |f| |i||1
Front Lower Steering headbearing has excessive wear or free play |2.2.2 |f| |i||1
Drive chain excessively loose |6.2.1d|1
Direction indicators affected by the operation of another lamp |1.5.1c|1
Horn not loud enough to be heard by another road user |1.7.3a|1
Nearside Rear Direction indicators not working |1.5.1c|1
Exhaust is leaking and excessively noisey |7.1.1b|1
Headlamp switch faulty |1.2.4|1
Nearside Steering lock stop maladjusted |2.1.3|1
Front Brake locking device insecure |3.2.A1e|1
Front Steering headbearing has excessive free play |2.2.2|1
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b|1
Rear Wheel spoke missing |4.2.1b|1
Brake pedal insecure |3.1.2a|1
Stop lamp does not emit a steady light |1.3.1b|1
Rear reflector missing (4.8.2 (a) (ii))1
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))1
Horn not working (7.7 (a))1
Nearside Headlamp insecure (4.1.1 (c))1
Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii))1
Suspension arm ball joint excessively worn Swingarm (5.3.4 (a) (i))1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy