>

MOT History from tests of petrol ROVER 90s year 1955

Review the list of common ROVER 90 failures below or to perform a specific mot history check on your ROVER then use our popular KnowYourCar service

mot history
Pass percent:77.27%
(The average a petrol ROVER 90 year 1955 passes without issue)
Based on:220 MOT Tests
Most common failuresNo# failures
Rear brake binding13
Parking brake: efficiency below requirements |3.7.B.7|13
Registration plate lamp issues9
Brakes imbalanced across an axle9
Headlamp aim out of alignment8
Rear parking brake recording little or no effort6
Rear Mechanical brake component has restricted free movement4
Windscreen wiper does not clear the windscreen effectively3
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|3
Exhaust has a major leak of exhaust gases |7.1.2|3
Offside Front Direction indicator not working |1.4.A.2c|3
Parking brake: efficiency below requirements |3.7.C.1b|3
Offside Stop lamp not working |1.2.1b|3
Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|2
Horn not working |1.6.2a|2
Front Direction indicators incorrect colour |1.4.A.2f|2
Nearside Rear Stop lamp not working |1.2.1b|2
Rear Stop lamp not working |1.2.1b|2
Mechanical brake component has restricted free movement2
Front brake application uneven2
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|2
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|2
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|2
Brake pipe excessively corroded2
Service brake: efficiency below requirements |3.7.C.1a|2
Nearside Stop lamp not working |1.2.1b|2
Offside front brake binding |3.7.B.1|2
Indicator tell tale inoperative |1.4.A.2a|2
Parking brake mechanism/associated mounting prescribed area is excessively corroded |3.1.9|2
Front Service brake is causing the steering wheel to severely pull one way |3.7.C.2|2
Nearside Front rear brake recording little or no effort |3.7.B.5a|1
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3|1
Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d|1
Offside Front front brake binding |3.7.B.1|1
Exhaust has a part missing |7.1.1a|1
Brake performance not tested |3.7.A.1|1
Offside Headlamp not working on main beam |1.7.5a|1
Offside Indicator switch faulty |1.4.A.1|1
Offside Brake master cylinder/servo mounting prescribed area is excessively corroded by brake cylinder |3.6.C.3|1
Nearside Inner Drag link end ball joint has excessive play |2.2.B.1f|1
Nearside Front Axle king pin has excessive play in pin and/or bush adversely affecting the steering |2.5.A.3a|1
Offside Front Axle king pin has excessive play in pin and/or bush adversely affecting the steering |2.5.A.3a|1
Steering column movement between the shaft and steering wheel |2.1.2b|1
Steering damper leaking oil |2.2.C.1f|1
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|1
Nearside Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|1
Centre Exhaust has a major leak of exhaust gases |7.1.2|1
Front Headlamp not working on main beam |1.7.5a|1
Offside Front Braking system leaking |3.6.A.1|1
Stop lamp(s) all not working (4.3.1 (a) (iii))1
Nearside Headlamp not working on main beam |1.7.5a|1
Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3|1
Service brake is causing the vehicle to swerve to the offside |3.7.C.2|1
Offside Track rod end seriously misaligned |2.2.C.1b|1
Nearside Track rod end seriously misaligned |2.2.C.1b|1
Offside Steering system fouling |2.2.D.2a|1
Nearside Front Brake hose leaking |3.6.A.1|1
Offside Front Service brake grabbing severely |3.7.C.2|1
Service brake is causing the steering wheel to severely pull one way |3.7.C.2|1
Nearside Front Shock absorber has an excessively worn shock absorber pivot |2.7.4|1
Offside Front Parking brake mechanism/associated mounting prescribed area is excessively corroded |3.1.9|1
Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded |3.6.C.3|1
Nearside Front Brake pipe inadequately clipped |3.6.B.1|1
Offside Front Steering pivot point has excessive play |2.2.B.1g|1
Rear Service brake grabbing severely |3.7.C.2|1
Rear Brake performance not tested |3.7.A.1|1
Rear Exhaust has a major leak of exhaust gases |7.1.2|1
Nearside Front Direction indicator not working |1.4.A.2c|1
Nearside rear brake recording little or no effort |3.7.B.5a|1
Offside Headlamp insecure |1.7.3|1
Nearside Headlamp not working on dipped beam |1.7.5a|1
Offside Headlamp not working on dipped beam |1.7.5a|1
Front Fuel system component leaking |7.2.3|1
Rear Exhaust has part of the system excessively deteriorated |7.1.1a|1
Offside Brake rod has restricted free movement |3.5.1k|1
Nearside Steering pivot point has excessive play |2.2.B.1g|1
Nearside Rear Leaf spring fractured |2.4.B.1a|1
Offside Rear Leaf spring fractured |2.4.B.1a|1
Nearside Rear Leaf spring deteriorated and seriously weakened |2.4.B.1a|1
Offside Rear Leaf spring deteriorated and seriously weakened |2.4.B.1a|1
Suspension component mounting prescribed area is excessively corroded |2.4.A.3|1
Headlamp not working on dipped beam |1.7.5a|1
Offside Rear Direction indicator not working |1.4.A.2c|1
Nearside Front Body has a sharp edge caused by corrosion |6.1.C.1|1
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|1
Offside Headlamp not in good working order |not working| |1.2.4a|1
Nearside Rear Exhaust system not adequately supported |7.1.1|1
Brake lever has restricted free movement |3.5.1k|1
Nearside front brake binding |3.7.B.1|1
Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3|1
Exhaust has part of the system excessively deteriorated |7.1.1a|1
Nearside front brake juddering severely |3.7.A.2b|1
Steering system excessively tight |2.2.D.1|1
Service brake: efficiency below requirements |3.7.B.7|1
Exhaust emits clearly visible black smoke during acceleration |7.3.A.2c|1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy