>

MOT History from tests of petrol ROVER 60s year 1958

Review the list of common ROVER 60 failures below or to perform a specific mot history check on your ROVER then use our popular KnowYourCar service

mot history
Pass percent:76.87%
(The average a petrol ROVER 60 year 1958 passes without issue)
Based on:134 MOT Tests
Most common failuresNo# failures
Brakes imbalanced across an axle8
Parking brake: efficiency below requirements |3.7.B.7|5
Rear brake binding4
Parking brake: efficiency below requirements |3.7.C.1b|3
Rear Exhaust has a major leak of exhaust gases |7.1.2|3
Parking brake: efficiency below requirements |3.7.D.4|3
Nearside Headlamp not working on dipped beam |1.7.5a|2
Front brake application uneven2
Rear parking brake recording little or no effort2
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|2
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|2
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|2
Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|2
Service brake: efficiency below requirements |3.7.C.1a|2
Windscreen wiper does not clear the windscreen effectively2
Parking brake recording little or no effort |3.7.D.3a|2
Service brake: efficiency below requirements |3.7.D.4|2
Offside Front Service brake indicates brake bind |3.7.D.2a|2
Brake master cylinder leaking hydraulic fluid |3.6.G.1f|1
Offside Rear Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|1
Centre Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|1
Nearside Front Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|1
Nearside Rear Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|1
Exhaust emits dense blue smoke at idle |7.3.A.2b|1
Exhaust emits excessive dense blue smoke during acceleration |7.3.A.2c|1
Nearside Rear Rear position lamp|s| incorrect colour |1.1.A.3e|1
Offside Rear Rear position lamp|s| incorrect colour |1.1.A.3e|1
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|1
Rear Exhaust system not adequately supported |7.1.1|1
Offside Rear rear brake recording little or no effort |3.7.B.5a|1
Nearside Steering locking device missing |2.2.C.1g|1
Offside Steering locking device missing |2.2.C.1g|1
Offside Rear Shock absorber detached |2.7.2b|1
Nearside Rear rear brake recording little or no effort |3.7.B.5a|1
Nearside Inner Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c|1
Nearside Outer Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c|1
Fuel cap/sealing device sealing washer missing |7.2.4c|1
Nearside Rear Braking system leaking |3.6.A.1|1
Offside Front Body has a projection caused by corrosion |6.1.C.1|1
Centre Exhaust has a major leak of exhaust gases |7.1.2|1
Offside Rear Fuel system component leaking |7.2.3|1
Offside Rear Shock absorber has a serious fluid leak |2.7.3|1
Offside Front Brake master cylinder/servo mounting prescribed area is excessively corroded |3.6.C.3|1
Registration plate lamp issues1
Rear brake application uneven1
Service brake is causing the vehicle to swerve to the nearside |3.7.C.2|1
Offside Front front brake binding |3.7.B.1|1
Nearside Rear Leaf spring fractured |2.4.B.1a|1
Nearside Front Headlamp not working on main beam |1.7.5a|1
Nearside front brake binding |3.7.B.1|1
Offside Front Anti-roll bar locating pin insecure |2.4.G.3a|1
Headlamp switch faulty |1.7.1|1
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|1
Centre Exhaust has part of the system excessively deteriorated |7.1.1a|1
Rear Exhaust has part of the system excessively deteriorated |7.1.1a|1
Steering system excessively tight |2.2.D.1|1
Service brake: efficiency below requirements |3.7.B.7|1
Parking brake mechanism/associated mounting prescribed area is excessively corroded |3.1.9|1
Centre Exhaust system not adequately supported |7.1.1|1
Nearside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2|1
Offside Front Seat belt retracting mechanism defective |5.2.5b|1
Nearside Windscreen wiper blade deteriorated |8.2.2|1
Nearside Suspension spring mounting prescribed area is excessively corroded |2.4.A.3|1
Offside Windscreen wiper blade deteriorated |8.2.2|1
Brake pedal has insufficient reserve movement |3.3.A.5|1
Nearside Front Suspension arm corroded and seriously weakened |2.4.G.1|1
Offside Front Suspension arm corroded and seriously weakened |2.4.G.1|1
Brake pedal has excessive side movement indicating a badly worn bearing or pivot |3.3.A.1d|1
Offside Front Anti-roll bar rubber bush deteriorated resulting in excessive movement |2.4.G.2|1
Exhaust system not adequately supported |7.1.1|1
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1|1
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1|1
Offside Rear Service brake indicates brake bind |3.7.D.2a|1
Nearside Front position lamp|s| not working |1.1.A.3b|1
Offside Parking brake mechanism/associated mounting prescribed area is excessively corroded |3.1.9|1
Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|1
Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|1
Offside Headlamp not working on dipped beam |1.7.5a|1
Offside Inner Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|1
Nearside Inner Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|1
Offside Rear Leaf spring fractured |2.4.B.1a|1
Registration plate issues1
Horn not working |1.6.2a|1
Parking brake efficiency below requirements (1.4.2 (a) (i))1
Parking (secondary brake) on a single line braking system imbalanced across an axle Axle 1 (1.3.1 (b) (i))1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy