| Most common failures | No# failures |
|---|
| Parking brake: efficiency below requirements |3.7.B.7| | 19 |
| Rear brake binding | 11 |
| Headlamp aim out of alignment | 11 |
| Rear parking brake recording little or no effort | 9 |
| Registration plate lamp issues | 7 |
| Offside Headlamp not working on dipped beam |1.7.5a| | 7 |
| Brakes imbalanced across an axle | 6 |
| Nearside Front position lamp|s| not working |1.1.A.3b| | 6 |
| Brake pipe excessively corroded | 6 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 5 |
| Nearside Headlamp not working on dipped beam |1.7.5a| | 5 |
| Windscreen wiper does not clear the windscreen effectively | 5 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 4 |
| Offside rear brake recording little or no effort |3.7.B.5a| | 4 |
| Parking brake: efficiency below requirements |3.7.C.1b| | 4 |
| Registration plate issues | 4 |
| Centre Exhaust has a major leak of exhaust gases |7.1.2| | 3 |
| Service brake: efficiency below requirements |3.7.B.7| | 3 |
| Indicator switch faulty |1.4.A.1| | 3 |
| Power steering component|s| leaking |2.3.3b| | 3 |
| Nearside Outer Front Track rod end ball joint has excessive play |2.2.B.1f| | 2 |
| Nearside rear brake recording little or no effort |3.7.B.5a| | 2 |
| Rear Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
| Offside Rear Service brake indicates brake bind |3.7.D.2a| | 2 |
| Parking brake efficiency below requirements (1.4.2 (a) (i)) | 2 |
| rear parking |secondary| brakes imbalanced | 2 |
| Nearside Track rod end ball joint has excessive play |2.2.B.1f| | 2 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Nearside Front Service brake excessively binding (1.2.1 (f)) | 2 |
| Nearside Front Headlamp not working on dipped beam |1.7.5a| | 2 |
| Offside Stop lamp not working |1.2.1b| | 2 |
| Front Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
| Horn not working |1.6.2a| | 2 |
| Power steering pump leaking from a failed joint |2.3.3b| | 1 |
| Offside Front Tie bar/rod has excessive play in a pin/bush |2.4.G.2| | 1 |
| Centre Exhaust system not adequately supported |7.1.1| | 1 |
| Offside Inner Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Windscreen wiper not operating automatically when switched on |8.2.1b| | 1 |
| Offside Front Anti-roll bar linkage fractured |2.4.G.1| | 1 |
| Front Windscreen wiper not operating automatically when switched on |8.2.1b| | 1 |
| Offside Front Drag link end ball joint has excessive play |2.2.B.1f| | 1 |
| Power steering ram|s| leaking from a failed seal |2.3.3b| | 1 |
| Nearside Front brake disc excessively pitted |3.5.1h| | 1 |
| Offside Front brake disc excessively pitted |3.5.1h| | 1 |
| Nearside Rear Leaf spring has excessive wear in a shackle pin and/or bush rear spring mount bushes are split and insecure |2.4.B.2| | 1 |
| Nearside Position lamp not working (4.2.1 (a) (ii)) | 1 |
| Offside Headlamp not working on main beam |1.7.5a| | 1 |
| Rear Brake hose leaking |3.6.A.1| | 1 |
| Offside Rear Leaf spring longitudinally displaced |2.4.B.1d| | 1 |
| Nearside Inner Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Service brake grabbing severely |3.7.C.2| | 1 |
| Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Front position lamp|s| not working |1.1.A.3b| | 1 |
| Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Anti-roll bar has excessive play in a pin/bush |2.4.G.2| | 1 |
| Offside Front Sub-frame attachment rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Battery insecure |1.9.1| | 1 |
| Offside Front Upper Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Steering box leaking to the extent that oil is dripping |2.1.1 |e| |ii|| | 1 |
| Nearside Direction indicators not working |1.4.A.2c| | 1 |
| Parking brake: efficiency below requirements |3.7.D.4| | 1 |
| Rear brake application uneven | 1 |
| Offside Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Rear Exhaust system not adequately supported |7.1.1| | 1 |
| Offside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
| Dipswitch operation does not deflect all main beam headlamps to make them dipped beams |1.7.4b| | 1 |
| Offside Front position lamp|s| not working |1.1.A.3b| | 1 |
| Nearside Front Position lamp not working |4.2.1 |a| |ii|| | 1 |
| Nearside Rear Position lamp not working |4.2.1 |a| |ii|| | 1 |
| Nearside Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
| Offside Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
| Nearside Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
| Windscreen washer not working | 1 |
| Windscreen wiper not working |3.4 |a|| | 1 |
| Parking brake efficiency below requirements |1.4.2 |a| |i|| | 1 |
| Nearside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Offside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Offside Front Upper Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Rear rear brake recording little or no effort |3.7.B.5a| | 1 |
| An item not tested |Manual| | 1 |
| Parking brake lever has no reserve travel |3.1.6b| | 1 |
| Offside Front Braking system leaking |3.6.A.1| | 1 |
| Nearside Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Nearside Inner Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Offside Inner Front Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Offside Outer Front Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Nearside Front Drag link end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Offside Front Drag link end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Nearside front brake binding |3.7.B.1| | 1 |
| Offside front brake binding |3.7.B.1| | 1 |
| Offside Front Service brake excessively binding (1.2.1 (f)) | 1 |
| Stop lamp(s) remains on when the brakes are released (4.3.2 (a) (iii)) | 1 |
| Nearside Front Outer Steering locking device ineffective Track rod (2.1.3 (d)) | 1 |
| Offside Front Outer Steering locking device ineffective Track rod (2.1.3 (d)) | 1 |
| Nearside Front Inner Vehicle structure inadequately repaired such that structural rigidity is significantly reduced Wheel arch (6.1.1 (d) (i)) | 1 |
| Offside Front Inner Vehicle structure inadequately repaired such that structural rigidity is significantly reduced wheel arch (6.1.1 (d) (i)) | 1 |
| Nearside Rear Inner Vehicle structure inadequately repaired such that structural rigidity is significantly reduced Upper wheel arch (6.1.1 (d) (i)) | 1 |
| Offside Rear Inner Vehicle structure inadequately repaired such that structural rigidity is significantly reduced Upper wheel arch (6.1.1 (d) (i)) | 1 |
| Front Brake cable knotted |3.5.1b| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Rear Leaf spring has excessive wear in a shackle pin and/or bush |2.4.B.2| | 1 |
| Nearside Stop lamp not working |1.2.1b| | 1 |
| Direction indicators not working |1.4.A.2c| | 1 |
| Offside Rear Leaf spring linkage pin excessively loose in its bracket |2.4.B.3a| | 1 |
| Rear Mechanical brake component has restricted free movement | 1 |
| Front Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Offside Front Headlamp not working on dipped beam |1.7.5a| | 1 |
| Offside Front Lower Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Offside Rear Bonded suspension unit bonding failed and part of unit is likely to become displaced |2.4.F.2| | 1 |
| Offside Front Torsion bar excessive play at an end fixing |2.4.E.2| | 1 |
| Offside Front Tie bar/rod rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| All position lamps not working |1.1.A.3b| | 1 |
| Steering component mounting prescribed area is fractured |2.2.C.1h| | 1 |
| Brake pedal spongy |3.3.B.1b| | 1 |
| Nearside Front Upper Front suspension has excessive movement at a wishbone pin or bush |2.5.A.1c| | 1 |
| Offside Front Upper Front suspension has excessive movement at a wishbone pin or bush |2.5.A.1c| | 1 |
| Nearside Rear Upper Shock absorber has an excessively worn bush |2.7.4| | 1 |
| Nearside Rear Braking system leaking |3.6.A.1| | 1 |
| Offside Inner Suspension component mounting prescribed area is excessively corroded sill |2.4.A.3| | 1 |
| Offside Inner Suspension component mounting prescribed area is excessively corroded brace bar
|2.4.A.3| | 1 |
| Nearside Front Lower Front suspension ball joint dust cover insecure so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Offside Front Lower Front suspension ball joint dust cover insecure so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Brake master cylinder/servo mounting prescribed area is excessively corroded |3.6.C.3| | 1 |
| Nearside Front position lamp|s| insecure |1.1.A.3a| | 1 |
| Nearside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
| Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |