Most common failures | No# failures |
---|
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 37 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 35 |
Windscreen wiper does not clear the windscreen effectively | 30 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 24 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 23 |
Nearside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 19 |
Offside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 17 |
Parking brake: efficiency below requirements |3.7.B.7| | 17 |
Registration plate lamp issues | 15 |
Registration plate issues | 15 |
Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 14 |
Offside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 13 |
Rear parking brake recording little or no effort | 13 |
Headlamp aim out of alignment | 12 |
Nearside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 10 |
Brake pipe excessively corroded | 10 |
Offside Stop lamp not working |1.2.1b| | 9 |
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 9 |
Rear Exhaust has a major leak of exhaust gases |7.1.2| | 8 |
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 8 |
Offside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 8 |
Offside Front constant velocity joint gaiter split |2.5.C.1a| | 8 |
Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 7 |
Exhaust has a major leak of exhaust gases |7.1.2| | 7 |
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 7 |
Windscreen has damage | 7 |
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 7 |
Nearside Front Front constant velocity joint gaiter split |2.5.C.1a| | 6 |
Nearside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 6 |
Windscreen wiper blade insecure | 6 |
Nearside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 6 |
Nearside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 6 |
Nearside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 5 |
Service brake: efficiency below requirements |3.7.B.7| | 5 |
Nearside Rear Stop lamp not working |1.2.1b| | 5 |
Offside Inner Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 5 |
Nearside Inner Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 5 |
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 5 |
Nearside Front Front position lamp|s| not working |1.1.A.3b| | 5 |
Nearside Front constant velocity joint gaiter split |2.5.C.1a| | 5 |
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 5 |
Brakes imbalanced across an axle | 5 |
Offside Outer Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 4 |
Nearside Rear Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 4 |
Front Exhaust has a major leak of exhaust gases |7.1.2| | 4 |
Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 4 |
Offside Obligatory mirror seriously damaged, affecting the rear view |8.1.2a| | 4 |
Offside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 4 |
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 4 |
Rear brake application uneven | 4 |
Rear brake binding | 4 |
Offside rear brake recording little or no effort |3.7.B.5a| | 3 |
Nearside Headlamp not working on dipped beam |1.7.5a| | 3 |
Rear Exhaust has part of the system excessively deteriorated |7.1.1a| | 3 |
Brake pedal anti-slip provision missing |3.3.A.1b| | 3 |
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
Nearside Rear Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Offside Front position lamp|s| not working |1.1.A.3b| | 3 |
Nearside Inner Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 3 |
Nearside Front Body insecure and dangerous to other road users |6.1.B.1b| | 3 |
Horn not working |1.6.2a| | 3 |
Nearside Stop lamp not working |1.2.1b| | 3 |
Offside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 3 |
Offside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 3 |
Offside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 2 |
Offside Rear Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Nearside Outer Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
Offside Headlamp insecure |1.7.3| | 2 |
Offside Inner Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Offside Front Front constant velocity joint gaiter split |2.5.C.1a| | 2 |
Nearside Outer Front constant velocity joint gaiter split |2.5.C.1a| | 2 |
Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Offside Front Track rod end ball joint has excessive play |2.2.B.1f| | 2 |
Offside Inner Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Offside Rear Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 2 |
Offside Headlamp not working on main beam |1.7.5a| | 2 |
Exhaust engine idle speed too high |7.3.A.2a| | 2 |
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Offside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 2 |
Nearside Outer Front Front constant velocity joint gaiter split |2.5.C.1a| | 2 |
Nearside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 2 |
Stop lamp not working |1.2.1b| | 2 |
Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
Offside Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Nearside Front Anti-roll bar linkage fractured |2.4.G.1| | 2 |
Direction indicators not working |1.4.A.2c| | 2 |
Offside Headlamp not working on dipped beam |1.7.5a| | 2 |
Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Nearside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 2 |
Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Offside Front Anti-roll bar linkage fractured |2.4.G.1| | 2 |
Brake hydraulic reservoir fluid level below minimum level |3.6.G.1b| | 2 |
Offside Outer Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Offside Side repeater not working |1.4.A.2c| | 2 |
Offside Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 2 |
Nearside Front Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Brake pedal spongy |3.3.B.1b| | 2 |
Offside Outer Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
Offside Front Position lamp not working (4.2.1 (a) (ii)) | 2 |
Nearside Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i)) | 2 |
Front brake disc excessively pitted |3.5.1h| | 1 |
Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
Nearside Inner Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Exhaust emissions hydrocarbon content excessive |7.3.B.1b| | 1 |
Offside Rear Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Front Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Brake master cylinder/servo mounting prescribed area is excessively corroded |3.6.C.3| | 1 |
Offside Front Anti-roll bar linkage cracked |2.4.G.1| | 1 |
Body insecure and dangerous to other road users |6.1.B.1b| | 1 |
Offside Rear Rear position lamp|s| incomplete |1.1.4a| | 1 |
Offside Front Direction indicator incomplete |1.5.A1b| | 1 |
Offside Rear rear brake grabbing severely |3.7.A.5b| | 1 |
Nearside Rear rear brake grabbing severely |3.7.A.5b| | 1 |
Nearside Front Lower Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
Offside Front Lower Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
Nearside Inner Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Inner Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Inner Rear Upper Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Rear Seat belt locking mechanism does not secure or release |5.2.5a| | 1 |
Offside Front Obligatory mirror missing |8.1.1| | 1 |
Front Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
Nearside Side repeater not working |1.4.A.2c| | 1 |
Nearside Outer Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Outer Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Outer Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Rear Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Rear rear brake recording little or no effort |3.7.B.5a| | 1 |
Nearside Rear Suspension arm attachment bracket/mounting damaged and its strength is seriously reduced |2.4.G.1| | 1 |
Nearside Front Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Nearside Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Rear Rear position lamp|s| incorrect colour |1.1.A.3e| | 1 |
Offside Rear Stop lamp emits other than a steady red light |1.2.1e| | 1 |
Offside Rear Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Rear Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Front position lamp|s| not in good working order |function impaired| |1.1.4a| | 1 |
Offside Rear position lamp|s| excessively damaged so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
Offside Outer Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Front Headlamp excessively damaged so that the light output is severely reduced |1.7.5a| | 1 |
Offside Front Headlamp excessively damaged so that the light output is severely reduced |1.7.5a| | 1 |
Nearside Front Front passenger door does not latch securely closed |6.2.B.1a| | 1 |
Nearside Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Nearside Front Shock absorber has an excessively worn shock absorber pivot |2.7.4| | 1 |
Nearside front brake binding |3.7.B.1| | 1 |
Front Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
Offside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Front Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
Nearside Front Body has a projection caused by damage |6.1.C.1| | 1 |
Offside Front Body has a projection caused by damage |6.1.C.1| | 1 |
Front passenger door does not latch securely closed |6.2.B.1a| | 1 |
Nearside Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
Nearside Front Side repeater not working |1.4.A.2c| | 1 |
Nearside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
Offside Stop lamp adversely affected by the operation of another lamp |1.2.1f| | 1 |
Nearside Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
Nearside Front Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 1 |
Nearside All position lamps not working |1.1.A.3b| | 1 |
Nearside Front Shock absorber has an excessively worn bush |2.7.4| | 1 |
Offside Front Shock absorber has an excessively worn bush |2.7.4| | 1 |
Offside Rear Shock absorber has an excessively worn bush |2.7.4| | 1 |
Nearside Rear wheel cylinder leaking |3.6.A.1| | 1 |
Nearside rear brake recording little or no effort |3.7.B.5a| | 1 |
Offside Outer Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Outer Rear Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Outer Rear Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front Windscreen wiper not operating automatically when switched on |8.2.1b| | 1 |
Offside Front Windscreen wiper not operating automatically when switched on |8.2.1b| | 1 |
Offside Front Obligatory mirror does not provide a view to the rear |8.1.2b| | 1 |
Nearside Front Body has a sharp edge caused by damage |6.1.C.1| | 1 |
Offside Front Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement |7.2.4b| | 1 |
Offside Driver`s seat insecure |6.2.A.1| | 1 |
Front Upper Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Rear Seat belt damaged sufficient to obstruct correct operation of the belt |5.2.2a| | 1 |
Nearside Front Lower Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Inner Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Inner Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Parking brake is not capable of being maintained in operation by direct mechanical action only |3.1.2| | 1 |
Centre Exhaust mounting missing |7.1.1b| | 1 |
Front Exhaust mounting missing |7.1.1b| | 1 |
Nearside Front Body has a projection caused by corrosion |6.1.C.1| | 1 |
Offside Front Anti-roll bar attachment bracket/mounting nut missing |2.4.G.1| | 1 |
Nearside rear brake grabbing severely |3.7.A.5b| | 1 |
Hazard warning lamps not flashing in phase, with ignition on |1.4.B.1f| | 1 |
Hazard warning lamps not flashing in phase, with ignition off |1.4.B.1f| | 1 |
Offside Front Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 1 |
Nearside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
Nearside Front Shock absorber has a serious fluid leak |2.7.3| | 1 |
Offside Front Shock absorber has a serious fluid leak |2.7.3| | 1 |
Nearside Front Suspension component mounting prescribed area is deliberately modified which significantly reduces the original strength |2.4.A.3| | 1 |
Nearside Rear Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Front Steering rack gaiter split |2.2.D.2d| | 1 |
Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
rear brakes release unevenly |3.7.B.4| | 1 |
Offside Inner Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Front position lamp|s| has less than 50% of the light sources illuminating |1.1.A.3b| | 1 |
Offside Outer Stop lamp not working |1.2.1b| | 1 |
Nearside Outer Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside rear brake grabbing severely |3.7.A.5b| | 1 |
Offside Inner Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Exhaust tailpipe not capable of allowing the emission probe to be inserted |7.3.B.1| | 1 |
Nearside Front Steering component mounting prescribed area is excessively corroded |2.2.C.1h| | 1 |
Offside Front Steering component mounting prescribed area is excessively corroded |2.2.C.1h| | 1 |
Nearside Front Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Front Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Front Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Front Lower Sub-frame corroded and seriously weakened |2.4.G.1| | 1 |
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
Nearside Rear Vehicle structure has damage which adversely affects braking or steering |6.1.A.1| | 1 |
Nearside Rear Exhaust system not adequately supported |7.1.1| | 1 |
Offside Rear Exhaust system not adequately supported |7.1.1| | 1 |
Front brake disc in such a condition that it is seriously weakened | 1 |
Nearside Rear Body insecure and dangerous to other road users |6.1.B.1b| | 1 |
Offside Front Body insecure and dangerous to other road users |6.1.B.1b| | 1 |
Offside Front Headlamp not working on main beam |1.7.5a| | 1 |
Offside Front Windscreen wiper blade deteriorated |8.2.2| | 1 |
Offside Front Seat belt locking mechanism does not secure or release |5.2.5a| | 1 |
Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Windscreen wiper blade deteriorated |8.2.2| | 1 |
Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Rear Stop lamp not working |1.2.1b| | 1 |
Offside Lower Front suspension has a suspension lower ball joint securing nut not locked |2.5.B.1a| | 1 |
Nearside Front Position lamp not working |4.2.1 |a|| | 1 |
Offside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Offside Rear Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded outer sill |2.4.A.3| | 1 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill |2.4.A.3| | 1 |
Nearside Front Hazard warning lamps inoperative |1.4.B.1b| | 1 |
Nearside Rear Service brake excessively binding (1.2.1 (f)) | 1 |
Windscreen wiper not working (3.4 (a)) | 1 |
Nearside Suspension component mounting prescribed area is excessively corroded rear sill inner |2.4.A.3| | 1 |
Offside Front Front position lamp|s| not working |1.1.A.3b| | 1 |
Obligatory mirror insecure |8.1.1| | 1 |
Nearside Outer Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Rear Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
Nearside Front Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Nearside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Rear Suspension component mounting prescribed area is deliberately modified which significantly reduces the original strength |2.4.A.3| | 1 |
Nearside Rear Outer Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear Outer Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear Suspension component mounting prescribed area is excessively corroded inner wheel arch |2.4.A.3| | 1 |
Centre Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Offside Front wheel bearing rough when rotated |2.5.A.2| | 1 |
Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 1 |
Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i)) | 1 |
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i)) | 1 |
Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i)) | 1 |
Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill (6.1.1 (c) (i)) | 1 |
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i)) | 1 |
Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i)) | 1 |
Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheel arch/rear of sill (6.1.1 (c) (i)) | 1 |
Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheel arch/rear of sill (6.1.1 (c) (i)) | 1 |
Nearside Rear Parking brake inoperative on one side (1.4.1 (a)) | 1 |
Offside Rear Parking brake inoperative on one side (1.4.1 (a)) | 1 |
Offside Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i)) | 1 |
Service brake efficiency below requirements (1.2.2 (a) (i)) | 1 |
Parking brake efficiency below requirements (1.4.2 (a) (i)) | 1 |
Nearside Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 1 |
Windscreen washer not working | 1 |
Nearside Parking brake inoperative on one side (1.4.1 (a)) | 1 |
Nearside Rear rear brake recording little or no effort |3.7.B.5a| | 1 |
Nearside Outer Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Outer Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Seat belt anchorage prescribed area is fractured |5.2.6| | 1 |
Offside Seat belt anchorage prescribed area is fractured |5.2.6| | 1 |
Offside Rear Suspension component mounting prescribed area is fractured |2.4.A.3| | 1 |
Offside Inner Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Rear Rear position lamp|s| excessively damaged so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
Offside Rear Rear position lamp|s| excessively damaged so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
Nearside Front Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 1 |
Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear Seat belt damaged sufficient to obstruct correct operation of the belt |5.2.2a| | 1 |
Offside Obligatory mirror insecure |8.1.1| | 1 |
Offside Rear Stop lamp not working |1.2.1b| | 1 |
Offside Rear Direction indicator not working |1.4.A.2c| | 1 |