MOT History from tests of petrol ROVER 200s year 1993

Review the list of common ROVER 200 failures below or to perform a specific mot history check on your ROVER then use our popular KnowYourCar service

mot history

Pass percent:63.33%

(The average a petrol ROVER 200 year 1993 passes without issue)

Based on:30 MOT Tests

Most common failures	No# failures
Exhaust emissions carbon monoxide content after 2nd fast idle excessive \|7.3.D.3\|	4
Exhaust has a major leak of exhaust gases \|7.1.2\|	2
Front Exhaust has a major leak of exhaust gases \|7.1.2\|	2
Registration plate issues	2
Nearside Outer Rear Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	2
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits \|7.3.D.3\|	2
Offside Outer Rear Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	2
Windscreen wiper does not clear the windscreen effectively	2
Headlamp aim out of alignment	1
Nearside Front Headlamp aim beam image too far to the right \|1.6.B4\|	1
Nearside Front Front wheel bearing has excessive play \|2.5.A.3c\|	1
Nearside Front Front constant velocity joint gaiter split \|2.5.C.1a\|	1
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Offside Front front brake binding \|3.7.B.1\|	1
Nearside Rear Stop lamp not working \|1.2.1b\|	1
Emissions not tested \|7.0\|	1
Rear An item not tested \|Manual\|	1
Windscreen has damage	1
Offside Rear Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Inner Rear Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Inner Rear Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Stop lamp not working \|1.2.1b\|	1
Nearside Rear Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Rear Trailing arm rubber bush deteriorated resulting in excessive movement \|2.4.G.2\|	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Exhaust emissions carbon monoxide content after 2nd fast idle excessive \|7.3.D.3\|	4
Exhaust has a major leak of exhaust gases \|7.1.2\|	2
Front Exhaust has a major leak of exhaust gases \|7.1.2\|	2
Registration plate issues	2
Nearside Outer Rear Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	2
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits \|7.3.D.3\|	2
Offside Outer Rear Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	2
Windscreen wiper does not clear the windscreen effectively	2
Headlamp aim out of alignment	1
Nearside Front Headlamp aim beam image too far to the right \|1.6.B4\|	1
Nearside Front Front wheel bearing has excessive play \|2.5.A.3c\|	1
Nearside Front Front constant velocity joint gaiter split \|2.5.C.1a\|	1
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Offside Front front brake binding \|3.7.B.1\|	1
Nearside Rear Stop lamp not working \|1.2.1b\|	1
Emissions not tested \|7.0\|	1
Rear An item not tested \|Manual\|	1
Windscreen has damage	1
Offside Rear Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Inner Rear Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Inner Rear Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Stop lamp not working \|1.2.1b\|	1
Nearside Rear Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Rear Trailing arm rubber bush deteriorated resulting in excessive movement \|2.4.G.2\|	1

MOT History from tests of petrol ROVER 200s year 1993

Find us on Facebook