| Most common failures | No# failures |
|---|
| Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 4 |
| Service brake: efficiency below requirements |3.7.B.7| | 3 |
| Headlamp aim out of alignment | 3 |
| Windscreen wiper does not clear the windscreen effectively | 2 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Offside Front Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Nearside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Nearside Rear Radius arm has excessive play in a pin/bush |2.4.G.2| | 2 |
| Nearside Front Fluid suspension unit totally deflated |2.4.D.1a| | 1 |
| Offside Front Fluid suspension unit totally deflated |2.4.D.1a| | 1 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Hazard warning lamps not flashing in phase, with ignition on |1.4.B.1f| | 1 |
| Nearside Front Lower Front suspension has excessive movement at a wishbone pin or bush |2.5.A.1c| | 1 |
| Offside Front Lower Front suspension has excessive movement at a wishbone pin or bush |2.5.A.1c| | 1 |
| Offside Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Front Front position lamp|s| incorrect colour |1.1.A.3e| | 1 |
| Offside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Headlamp not working on dipped beam |1.7.5a| | 1 |
| Offside Headlamp not working on dipped beam |1.7.5a| | 1 |
| Offside Rear fog lamp not working |1.3.2b| | 1 |
| Rear fog lamp tell tale not working |1.3.1b| | 1 |
| Horn control missing |1.6.1| | 1 |
| Indicator switch insecure |1.4.A.1| | 1 |
| Nearside Rear Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Front Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Rear Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Rear Brake cable has restricted free movement |3.5.1k| | 1 |
| Nearside Stop lamp not working |1.2.1b| | 1 |
| Offside Stop lamp not working |1.2.1b| | 1 |
| Nearside Headlamp aim beam image kick up to the offside |1.8| | 1 |
| Offside Headlamp aim beam image kick up to the offside |1.8| | 1 |
| Hazard warning switch faulty |1.4.B.1d| | 1 |
| Offside Rear Rear fog lamp not working |1.3.2b| | 1 |
| Nearside Front Suspension component mounting prescribed area is fractured |2.4.A.3| | 1 |
| Front Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Rear Radius arm has excessive play in a pin/bush |2.4.G.2| | 1 |
| Offside Rear Direction indicator incorrect colour |1.4.A.2f| | 1 |
| Offside Rear rear brake recording little or no effort |3.7.B.5a| | 1 |
| Rear Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Nearside Rear Radius arm has excessive play in a pin/bearing |2.4.G.2| | 1 |
| Offside Rear Radius arm has excessive play in a pin/bearing |2.4.G.2| | 1 |
| Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside rear brake recording little or no effort |3.7.B.5a| | 1 |
| Rear parking brake recording little or no effort | 1 |
| Parking brake: efficiency below requirements |3.7.B.7| | 1 |