Most common failures | No# failures |
---|
Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 100 |
Headlamp aim out of alignment | 66 |
Parking brake: efficiency below requirements |3.7.B.7| | 48 |
Service brake: efficiency below requirements |3.7.B.7| | 44 |
Nearside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 41 |
Offside Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 39 |
Brake pipe excessively corroded | 37 |
Nearside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 35 |
Nearside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 32 |
Offside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 31 |
Nearside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 26 |
Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 26 |
Nearside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 24 |
Windscreen wiper does not clear the windscreen effectively | 24 |
Offside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 24 |
Parking brake lever has no reserve travel |3.1.6b| | 23 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 23 |
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 20 |
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 18 |
Rear parking brake recording little or no effort | 17 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 15 |
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 15 |
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 15 |
Front Exhaust has a major leak of exhaust gases |7.1.2| | 14 |
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 13 |
Nearside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 13 |
Offside rear brake recording little or no effort |3.7.B.5a| | 13 |
Nearside Windscreen wiper blade deteriorated |8.2.2| | 13 |
Rear Exhaust has a major leak of exhaust gases |7.1.2| | 12 |
Exhaust has a major leak of exhaust gases |7.1.2| | 12 |
Exhaust emissions carbon monoxide content at idle excessive |7.3.D.4| | 12 |
Exhaust emissions carbon monoxide content after 2nd fast idle excessive |7.3.D.3| | 12 |
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 11 |
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 11 |
Offside Rear Radius arm has excessive play in a pin/bush |2.4.G.2| | 11 |
Centre Exhaust has a major leak of exhaust gases |7.1.2| | 11 |
Offside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 10 |
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 10 |
Offside Front Windscreen wiper blade deteriorated |8.2.2| | 10 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 10 |
Exhaust emissions hydrocarbon content excessive |7.3.B.1b| | 10 |
Registration plate issues | 10 |
Offside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 10 |
Nearside Front Windscreen wiper blade deteriorated |8.2.2| | 9 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 9 |
Offside Rear rear brake recording little or no effort |3.7.B.5a| | 9 |
Nearside Rear rear brake recording little or no effort |3.7.B.5a| | 9 |
Nearside rear brake recording little or no effort |3.7.B.5a| | 9 |
Nearside Rear Radius arm has excessive play in a pin/bush |2.4.G.2| | 9 |
Brakes imbalanced across an axle | 8 |
Nearside Rear Stop lamp not working |1.2.1b| | 8 |
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 8 |
Offside Stop lamp not working |1.2.1b| | 8 |
Front Fluid suspension has no suspension movement |2.4.D.5| | 7 |
Rear Sub-frame corroded and seriously weakened |2.4.G.1| | 7 |
Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 7 |
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 6 |
Emissions not tested |7.0| | 6 |
Fuel tank leaking |7.2.3| | 6 |
Nearside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 6 |
Windscreen has damage | 6 |
Offside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 6 |
Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 6 |
Offside Front Front position lamp|s| not working |1.1.A.3b| | 6 |
Offside Front position lamp|s| not working |1.1.A.3b| | 6 |
Nearside Front Front position lamp|s| not working |1.1.A.3b| | 6 |
Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 6 |
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits |7.3.D.3| | 6 |
Offside Rear Stop lamp not working |1.2.1b| | 5 |
Offside Front Direction indicator incomplete |1.5.A1b| | 5 |
Nearside Rear Radius arm has excessive play in a pin/bearing |2.4.G.2| | 5 |
Nearside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 5 |
Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 5 |
Nearside Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 5 |
Nearside Rear Suspension arm has excessive play in a pin/bush |2.4.G.2| | 5 |
Nearside Stop lamp not working |1.2.1b| | 5 |
Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 4 |
Offside Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 4 |
Offside Front suspension has excessive play in a upper suspension ball joint |2.5.B.1a| | 4 |
Registration plate lamp issues | 4 |
Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 4 |
Offside Windscreen wiper blade deteriorated |8.2.2| | 4 |
Nearside Inner Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 4 |
Offside Rear fog lamp not working |1.3.2b| | 4 |
Front Exhaust has part of the system excessively deteriorated |7.1.1a| | 4 |
Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 4 |
Brake hose excessively deteriorated | 4 |
Exhaust emissions hydrocarbon content after 2nd fast idle excessive |7.3.D.3| | 4 |
rear brake recording little or no effort |3.7.B.5a| | 3 |
Centre Exhaust has part of the system excessively deteriorated |7.1.1a| | 3 |
Front Fluid suspension unit totally deflated |2.4.D.1a| | 3 |
Windscreen wiper blade deteriorated |8.2.2| | 3 |
Offside Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 3 |
Nearside Rear Rear wheel bearing has excessive play |2.6.2| | 3 |
Nearside Inner Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 3 |
Offside Inner Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 3 |
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
Nearside Side repeater not working |1.4.A.2c| | 3 |
Horn not working |1.6.2a| | 3 |
Offside Rear Suspension arm has excessive play in a pin/bush |2.4.G.2| | 3 |
Nearside Front Direction indicator incomplete |1.5.A1b| | 3 |
Offside Rear Radius arm has excessive play in a pin/bearing |2.4.G.2| | 3 |
Nearside Front Subframe mounting prescribed area is inadequately repaired |2.4.A.3| | 3 |
Nearside Rear Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
Front Suspension has inadequate clearance with the bump stop |2.4.A.1a| | 3 |
Nearside Outer Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Exhaust engine idle speed too high |7.3.A.2a| | 3 |
Offside Front Fluid suspension has no suspension movement |2.4.D.5| | 3 |
Nearside Front Headlamp not in good working order adversely affecting beam image |1.2.4a| | 3 |
Offside Inner Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
Offside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
Fluid suspension unit totally deflated |2.4.D.1a| | 3 |
Rear brake application uneven | 3 |
Offside Outer Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 3 |
Centre Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 3 |
Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
Offside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
Nearside Front Suspension has inadequate clearance with the bump stop |2.4.A.1a| | 3 |
Offside Front Suspension has inadequate clearance with the bump stop |2.4.A.1a| | 3 |
Offside Outer Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
Rear Rear fog lamp not working |1.3.2b| | 2 |
Offside Front Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
Brake pedal spongy |3.3.B.1b| | 2 |
Brake hydraulic reservoir fluid level below minimum level |3.6.G.1b| | 2 |
Nearside Rear Trailing arm has excessive play in a pin/bush |2.4.G.2| | 2 |
Parking brake lever is impeded in its travel |3.1.6c| | 2 |
Offside Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 2 |
Driver`s door cannot be opened from outside the vehicle |6.2.B.1b| | 2 |
Offside Headlamp not working on dipped beam |1.7.5a| | 2 |
Rear Fuel tank leaking |7.2.3| | 2 |
Nearside Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 2 |
Windscreen wiper blade insecure | 2 |
Direction indicators not in good working order |function impaired| |1.5.A1b| | 2 |
Offside Outer Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Rear Exhaust emissions hydrocarbon content excessive |7.3.B.1b| | 2 |
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 2 |
Offside Inner Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Offside Outer Rear Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
Offside Rear Rear fog lamp not working |1.3.2b| | 2 |
Nearside Rear Brake linkage has restricted free movement |3.5.1k| | 2 |
Front Windscreen wiper blade deteriorated |8.2.2| | 2 |
Offside Rear Fluid suspension unit deteriorated and likely to fail |2.4.D.1b| | 2 |
Nearside Rear Statutory seat belt missing |5.1.1| | 2 |
Offside Inner Rear Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Offside Front Headlamp not in good working order adversely affecting beam image |1.2.4a| | 2 |
Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
Nearside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Offside Front Fluid suspension accumulator totally deflated |2.4.D.1a| | 2 |
Rear Mechanical brake component has restricted free movement | 2 |
Offside Outer Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Nearside Rear Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Nearside Front Direction indicator not working |1.4.A.2c| | 2 |
Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 2 |
Offside Rear Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
Offside Inner Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Rear brake binding | 2 |
Offside Front Fluid suspension unit totally deflated |2.4.D.1a| | 2 |
Offside Front Direction indicator insecure |1.4.A.2b| | 2 |
Nearside Front Side repeater not working |1.4.A.2c| | 2 |
Hazard warning switch faulty |1.4.B.1d| | 2 |
Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Nearside Rear wheel cylinder leaking |3.6.A.1| | 2 |
Nearside Headlamp not working on dipped beam |1.7.5a| | 2 |
Centre Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Offside Rear Radius arm worn and seriously weakened |2.4.G.1| | 2 |
Offside Front Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
Offside Front Direction indicator not working |1.4.A.2c| | 2 |
Offside Rear Subframe mounting prescribed area is inadequately repaired |2.4.A.3| | 2 |
Nearside Rear Subframe mounting prescribed area is inadequately repaired |2.4.A.3| | 2 |