MOT History from tests of diesel ROVER 100s year 1994

Review the list of common ROVER 100 failures below or to perform a specific mot history check on your ROVER then use our popular KnowYourCar service

mot history

Pass percent:60.00%

(The average a diesel ROVER 100 year 1994 passes without issue)

Based on:25 MOT Tests

Most common failures	No# failures
Parking brake: efficiency below requirements \|3.7.B.7\|	3
Rear parking brake recording little or no effort	3
Offside Rear Body has a sharp edge caused by corrosion \|6.1.C.1\|	2
Nearside Front Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	2
Service brake: efficiency below requirements \|3.7.B.7\|	2
Nearside Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Offside Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Offside Front Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Rear Exhaust has a major leak of exhaust gases \|7.1.2\|	1
Rear Sub-frame corroded and seriously weakened \|2.4.G.1\|	1
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Nearside Rear Body has a sharp edge caused by corrosion \|6.1.C.1\|	1
Nearside Front Subframe mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Windscreen wiper does not clear the windscreen effectively	1
Parking brake lever has no reserve travel \|3.1.6b\|	1
Nearside Front Upper Ball joint has excessive play \|2.2.B.1f\|	1
Nearside Front Lower Ball joint has excessive play \|2.2.B.1f\|	1
Offside Rear Braking system leaking \|3.6.A.1\|	1
Offside rear brake recording little or no effort \|3.7.B.5a\|	1
Nearside Front Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Offside Front Front position lamp\|s\| not working \|1.1.A.3b\|	1
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Offside Rear Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Parking brake: efficiency below requirements \|3.7.B.7\|	3
Rear parking brake recording little or no effort	3
Offside Rear Body has a sharp edge caused by corrosion \|6.1.C.1\|	2
Nearside Front Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	2
Service brake: efficiency below requirements \|3.7.B.7\|	2
Nearside Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Offside Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Offside Front Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Rear Exhaust has a major leak of exhaust gases \|7.1.2\|	1
Rear Sub-frame corroded and seriously weakened \|2.4.G.1\|	1
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Nearside Rear Body has a sharp edge caused by corrosion \|6.1.C.1\|	1
Nearside Front Subframe mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Windscreen wiper does not clear the windscreen effectively	1
Parking brake lever has no reserve travel \|3.1.6b\|	1
Nearside Front Upper Ball joint has excessive play \|2.2.B.1f\|	1
Nearside Front Lower Ball joint has excessive play \|2.2.B.1f\|	1
Offside Rear Braking system leaking \|3.6.A.1\|	1
Offside rear brake recording little or no effort \|3.7.B.5a\|	1
Nearside Front Lower Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Offside Front Front position lamp\|s\| not working \|1.1.A.3b\|	1
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Offside Rear Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1

MOT History from tests of diesel ROVER 100s year 1994

Find us on Facebook